Spectrum SR-002-R Remote Control User Guide
Spectrum SR-002-R Remote Control User Guide
Program your remote using Auto-Search:
- Turn on the TV you want to program.
- Press and hold the Menu + OK buttons simultaneously until the Input button blinks twice.
- Press TV Power. The Input button should light up solid.
- Aim the remote at your TV and press and hold the UP arrow.
- Once the device turns off, release the UP arrow. Your remote should store the code.
GETTING START Install Batteries
1. Apply pressure with your thumb and slide the battery door to remove it.
2. Insert two AA batteries. Match the+ and – marks
3. Slide the battery door back into place.
PROGRAM YOUR REMOTE Setup for Popular TV Brands
This step covers setup for the most common TV brands. If your brand is not listed, please proceed to PROGRAMMING YOUR REMOTE FOR TV AND AUDIO CONTROL.
1. Ensure that your TV is powered on
2. Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice.
3. Press and release the TV POWER key once.
4. Find your TV brand in the chart to the right and note the digit that relates to your TV brand. Press and hold down the digit key.
5. Release the digit key when the TV turns off.Setup is complete.If this was not successful or if you have an audio device in addition to your TV, please proceed to PROGRAMMING YOUR REMOTE FOR TV AND AUDIO CONTROL.
QUESTIONS OR CONCERNS Troubleshooting
Problem: INPUT key blinks, but remote doesn’t control my equipment.
Solution: Follow the programming process in this manual to set up your remote to control your home theater equipment.
Problem: The INPUT key doesn’t light up on the remote when I press a key.
Solution: Ensure that the batteries are functional and are inserted properly.
Replace the batteries with two new AA-size batteries.
Problem: My remote won’t control my equipment.
Solution: Be sure that you have a clear line of sight to your home theater equipment.
Programming Your Remote for TV and Audio Control Programacion
This step covers setup for all TV and audio brands. For faster setup, be sure to locate your device brand in the code list before beginning setup.
- Ensure that your TV is powered on.
2. Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice.
3. Enter the first code listed for your brand. The INPUT key will blink twice to confirm when complete.
4. Test volume and TV power functions. If the device responds as expected, setup is complete. If not, repeat this process using the next code listed for your brand. If you have an audio device in addition to your TV, please repeat steps 1-4 listed here with your audio device.
Documents / Resources
SPECIFICATION
| Product Name | Spectrum Net Remote: SR-002-R |
| Compatibility | Works with most TV brands and cable boxes |
| Battery Type | AA |
| Number of Batteries Required | 2 |
| Remote Control Type | Infrared (IR) |
| Voice Control | No |
| RF Capable | No |
FAQS
Be careful. They are not interchangeable. My box requires the 8780L. Spectrum sent me an 8790 to replace it and it wasn’t compatible.
Any make of AA batteries. You will require 2.
It should, it has a scan mode
Yes
Make sure that you are pressing and holding the MENU and OK buttons simultaneously. If you are, make sure that the INPUT button is blinking twice.
This step covers setup for the most common audio brands. If your brand is not listed, please proceed to PROGRAMMING YOUR REMOTE FOR TV AND AUDIO CONTROL. 1. Ensure that your TV is powered on and your audio device is turned on and playing a source such as FM radio or CD player. 2. Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice. 3. Press and release the TV POWER key once. 4. Find your audio brand in the chart to the right and note the digit that relates to your audio brand. Press and hold down the digit key until your audio device turns off (approximately 5 seconds). Release the digit key when your audio device turns off (approximately 5 seconds).Setup is complete!If this was not successful, please proceed to PROGRAMMING YOUR REMOTE FOR TV AND AUDIO CONTROL
Prompting google appears to show ur5u-8720, and ur5u-8790 to be the same,The one I received does say spectrum.
Absolutely yes it does.
It might depending on what the walls are made of and anything in between them.
If your question is “does it work with the Spectrum supplied digital recorder?”, yes it does. It also works with a variety of other independently supplied electronics — AUX, DVD, VCR, TV.
Yes it will work with a Twc cable box Only
As long as the TV can be hooked up to cable.
No, definitely not.
New
Voice control no!
No clue,… my remote does not have an “auto” button.
Yes.
Any make of AA batteries. You will require 2.
Follow the programming process in this manual to set up your remote to control your home theater equipment.
Ensure that your TV is powered on, simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice, find your TV brand in the chart provided in the manual and note the digit that relates to your TV brand, press and hold down the digit key, release the digit key when the TV turns off. Setup is complete.
Apply pressure with your thumb and slide the battery door to remove it. Insert two AA batteries. Match the + and – marks. Slide the battery door back into place.
Turn on the TV you want to program, press and hold the Menu + OK buttons simultaneously until the Input button blinks twice, press TV Power, aim the remote at your TV and press and hold the UP arrow. Once the device turns off, release the UP arrow. Your remote should store the code.
No, they are not interchangeable. Be careful while selecting as they have different compatibility.
Ensure that your TV is powered on and your audio device is turned on and playing a source such as FM radio or CD player, simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice, find your audio brand in the chart provided in the manual and note the digit that relates to your audio brand, press and hold down the digit key until your audio device turns off (approximately 5 seconds), release the digit key when your audio device turns off (approximately 5 seconds). Setup is complete.
Make sure that you are pressing and holding the MENU and OK buttons simultaneously. If you are, make sure that the INPUT button is blinking twice.
Yes, it can work with a Roku.
Yes, it should work with TCL Roku TV as it has a scan mode.
It is brand new.
No, it does not have voice control.
Yes, it works with a variety of independently supplied electronics including AUX, DVD, VCR, and TV.
It might depending on what the walls are made of and anything in between them.
Yes, it does work with the newer Spectrum 201 cable box.
As long as the TV can be hooked up to cable, it should work.
No, it is not RF capable.
Yes, it works with Seiki TV and Spectrum digital cable box.
The manual does not provide information on “Auto” button on the Spectrum box.
Yes, it does work with Westinghouse TVs.
VIDEO
Read More About This Manual & Download PDF:
Spectrum SR-002-R Remote Control User Guide – [ Download PDF ]
