Vijim Technology RMT-01 Wireless Bluetooth Extendable Tripod
User Manual
RMT-01
Wireless Bluetooth Extendable Tripod
- 1/4″ Screw
- Adapter
- Indicator Lamp
- Shutter
- AF Button
- Smartphone Control
- Damping Adjustment Wheel
- T/W Zoom Control Button
- On/Off Button
- Recording Button
- Button
Description of Function
| Shutter | Press to Take Photo |
| Recording Button | Press to start recording video and again to stop.( For Cameras that Support One-touch Switching, press to start recording) |
| AF Button | Press to Zoom ( Compatible with partial Sony, Canon cameras) |
| Cl Button | Same Function of Cl Button on Camera Paired |
| Smartphone Control | Press to Take Photo ( Press and Hold to Pair Bluetooth) |
Instruction of Indicator Lamp
| Battery Lower than 70%, Red Indicater Flash Slowly Battery more than 70%, Green Indicater Flash Slowly | Charging |
| Red Indicator Flicker Quickly | Low Battery |
| Red Indicator On for 3 Seconds and Off | Turn On |
| Blue Indicator Flash Slowly | Connection Failed |
| Blue Indicator On for 2 Seconds and Off | Connection Successful |
| Blue Indicator Falsh Speedily | Paid |
| Green Indicator Falsh One Time | Effect |
| Green Indicator Continuely On | Battery |
Specification parameters
| Load Capacity | ≤ 51.5kg |
| Dimension | 37’33’164.5mm |
| Pay Loading | 115g |
| Compatible With | Smartphone ( Android, IOS ect) Camera ( Sony, Canon, Nikon) |
| Working Range | ≥10m |
| Li-Ion Battery | 3.7V / 90mAh |
| Charging Port | 5V / 1A (Type-C) |
| Charging Time | ≤ 590min |
| Working Time | Unstoply Working ?-24H, Turn Off ≥360, Sleep Mode ≥60 |
Phone Pairing
Phone Pairing ( Canon)
Please Remove or Turn Off Connected Devices’ Bluetooth Before Pairing with a New Device.
Camera Pairing is for Reference Only, Please Respect Official Manual of Different Camera Brands for More Details.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Documents / Resources
 | Shenzhen Vijim Technology RMT-01 Wireless Bluetooth Extendable Tripod [pdf] User Manual RMT, 2A722-RMT, 2A722RMT, RMT-01 Wireless Bluetooth Extendable Tripod, RMT-01, Wireless Bluetooth Extendable Tripod, Bluetooth Extendable Tripod, Extendable Tripod, Tripod |
