TIKI TORCH OUTDOOR BLUETOOTH SPEAKERS (SET OF 2)
Item No. 207128
Thank you for purchasing the Sharper Image Tiki Torch Outdoor Bluetooth Speakers (Set of 2). Please take a moment to read this guide and store it for future reference.
FEATURES
• Ambient lighting
• Set of 2 speakers
• Bluetooth-enabled speakers
• Includes a MicroUSB cable
LIGHT MODE
• Press the light mode button once to turn on and once again to turn off
BLUETOOTH SPEAKER MODE
• Press the ON/OFF button for 2 seconds to turn the Bluetooth speaker function ON/OFF
• After pressing the button for 2 seconds, the speaker will go into search mode. A white indicator light will flash when the speaker has successfully connected
• Press the + button (next song/V+Key) to skip to the next song
• Long press the + button to increase volume
• Press + – together to cancel Bluetooth pairing
• Press the -/V-Key to listen to the last song. Press the – button to decrease the volume
• Press the Play/Pause button to play or pause music
HOW TO CHARGE
• Insert the MicroUSB cable into the Tiki Torch Bluetooth Speaker
• The indicator light will illuminate red when charging
• When the Tiki Torch Bluetooth Speaker is fully charged the indicator light will turn off
WARNINGS
• Only charge the Tiki Torch Bluetooth Speaker in temperatures ranging from 0°-104° F
• Do not use the device while charging
• Pull the MicroUSB cable out after it is fully charged
• Don’t charge the device in areas with high humidity
• Do not let the product come into contact with benzene, diluent or other chemicals
• Do not use this product close to magnetic or electric fields
• Avoid direct lighting and heating appliances while in use
• Do not repair, disassemble or transform yourself. Contact customer service for assistance
SPECIFICATIONS
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. If you have any questions not covered in this guide, please call our Customer Service department at 1 877-210-3449. Customer Service agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
Sharper-Image-Tiki-Torch-Bluetooth-Speakers-207128-Manual-Optimized.pdf
Sharper-Image-Tiki-Torch-Bluetooth-Speakers-207128-Manual-Original.pdf
my tiki torch speakers will not both play at the same time. both are connected but only one plays. No instruction on how to sync them so they play together
2nd speaker does not light up or sync to the 1st speaker. when charging no lights to show charging, if you press the light button the tiki glows (only when plugged in) with the red indicator lit, but doesn’t seem to be charging. unplugged and plugged back in, still no connection or lights.
I find it interesting I have similar issues as the other 2 commenters. Speakers won’t pair to one another so only one works at a time. Speakers only work while plugged since they will not charge. The instructions to do the pairing are incomplete.
When I called Sharper Image I asked them to check for any known issues with the speakers. They said there were none. A definite lie. Anyway, they said they would replace them.
to be continued……
How do I replace a burnt out flame speaker light?
Again, how do I replace a burnt out or nonfuncting flame speaker light?
I need to replace the burnt out light for flame speakers