Motorola Solutions MXM7000 INTL Mobile Solution
Specifications
- IP Rating: IP54
- Connectors: RJ45, USB-A, Micro SD Card Slot, LTE SIM Card Slot, GCAI MMP Dust Cover, RJ50, 12 V Power Connector, Trunnion Mounting Point, TETRA UHF Connector C, 26-Pin Accessory Connector, RS232 (9 SubD)
- Display: TouchScreen
- Buttons: Power Button, Emergency Button, Programmable Buttons, Rotary Knob
Getting Started
- Clean the radio with a moistened or antistatic cloth.
- Ensure the VENT membrane on the control head is clean.
Attaching the Antenna
- Connect the LTE Main, LTE DIV, and GNSS cables to the control head.
- Connect the TETRA cable to LPF connector A or B and then to the transceiver TETRA UHF Connector C.
- Secure all connections by locking the cables.
Inserting Cards
- Insert an LTE SIM or microSD card into the respective slots with gold contacts facing downwards.
- Close the card holder door securely.
Turning On/Off
To Turn On:
- Press and hold the Power button for three seconds.
To Turn Off:
- Press and hold the Power button and tap the Power off icon.
Inserting TETRA SIM Card:
- Open the TETRA SIM card holder door on the transceiver.
- Insert the TETRA SIM card with gold contacts facing downwards.
- Close the TETRA SIM card holder door securely.
More Information:
- Power Button and Screen Lock/Unlock
- TETRA and LTE LEDS
- TouchScreen Display
- Emergency Button
- Programmable Buttons
- RJ45 Connector
- USB-A Port
- Micro SD Card Slot
- LTE SIM Card Slot
- GCAI MMP Dust Cover
- Rotary Knob
- Dust Cover
- LTE Div
- GNSS
- LTE Main
- RJ50 Connector
- RAM Ball Mounting
- 12 V Power Connector
- Trunnion Mounting Point
- Internal TETRA SIM Card Slot
- TETRA UHF Connector C
- 12 V Power Connector
- 26-Pin Accessory Connector
- RJ50 Connector (for Control Head)
- RJ50 Connector (for External TETRA SIM Reader)
- RS232 (9 SubD)
Looking After Your Radio
- Never leave your control head in extreme temperatures (over +85 °C), such as behind a windscreen in direct sunlight.
- The control head is protected against dust and water sprays (compliant with the IP54 rating).
- To clean your radio, use a moistened or antistatic cloth.
- Ensure the gore port membrane on the back of the control head, labeled VENT, is kept clean.
Attaching the Antenna
- Connect the LTE Main, LTE DIV, and GNSS cables of the external antenna to the control head. Turn the connector sleeve on each cable to lock the cables to the control head.
- Connect the TETRA cable of the external antenna to the Low Pass Filter (LPF) connector A or B.
- Connect a coaxial cable from LPF connector A or B to the transceiver TETRA UHF Connector C.
- Turn the connector head of the cable to lock the cable to the LPF
Inserting the LTE SIM and MicroSD Cards
- Open the card holder door on the control head.
- Insert the LTE SIM or microSD card into the correct slot. Ensure that the gold contact area is facing downwards.
- Close the card holder door.
Inserting the TETRA SIM card
- Open the TETRA SIM card holder door on the transceiver.
- Insert the TETRA SIM card into the card slot. Ensure that the gold contact area is facing downwards.
- Close the TETRA SIM card holder door.
Turning Your Radio On
- Press and hold the Power button for three seconds to turn on your radio.
Turning Your Radio Off
- Press and hold the Power button.
- Tap the Power off icon to turn off your radio.
TETRA Transmit and Receive Indicator
LTE LED and TETRA LED Status Indication
| Indication | LTE LED | TETRA LED |
| Solid green | Not applicable | In use Repeating call |
| Blinking green | Not applicable | TMO service idle Switching modes TMO to DMO |
| Solid red | Not applicable | Out of service |
| Blinking red | Not applicable | Connecting to a network Switching modes from DMO to TMO |
|
Solid orange |
Not applicable | Radio is turning on Transmit inhibit mode in service Channel busy in DMO Radio interference in DMO |
| Blinking orange | Not applicable | Incoming private |
| Blinking blue | New app notification New SMS/MMS New email Missed call | Not applicable |
| No indication | No new notification. The radio was powered off. | The radio is turned off |
More Information on Your Radio
- Visit the Motorola Solutions website at:
- Learning Experience Portal
- User documentation available at:
- Open Source Software Legal Notices
- Available in Integrated Terminal Management (iTM)
- www.motorolasolutions.com
Motorola solution
- This document is copyright protected. Duplications for the use of Motorola Solutions products are permitted to an appropriate extent. Duplications for other purposes, changes, additions, or other processing of this document are not permitted. Only this electronically saved document is considered to be the original. Duplications are considered merely copies. Motorola Solutions, Inc. and its subsidiaries and affiliates do not vouch for the correctness of such kinds of copies.
- MOTOROLA, MOTO, MOTOROLA SOLUTIONS, a nd the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. The Bluetooth® word mark and logos are registered trademarks owned by the
- Bluetooth SIG, Inc. and are used under license. All other trademarks are the property of their respective owners.
- © 2024 Motorola Solutions, Inc. All rights reserved.
FAQs
Q: What do the different lightbar colors and indicators signify?
A:
- Group Call: Gray or light blue
- Broadcast Call: Amber
- Receiving: Amber
- Transmitting: Green
- LTE LED Status: Solid green (Connected), Blinking green (Connecting), Solid red (Error), Blinking red (Disconnecting), Solid orange (Standby), Blinking orange (Data Transfer), Blinking blue (Activity)
Documents / Resources
 | Motorola Solutions MXM7000 INTL Mobile Solution [pdf] User Guide MXM7000 INTL Mobile Solution, MXM7000, INTL Mobile Solution, Mobile Solution, Solution |