MikroElektronika Click Booster Pack Adapter for Stellaris LaunchPad
What is mikroBUS™?
mikroBUS™ host connector consists of two 1×8 female headers containing pins to be most likely used in the target add-on board. There are three groups of communication pins: SPI, UART and I2C. There are also single pins for PWM, Interrupt, Analog input, Reset and Chip Select. Pinout contains two power groups: +5V and GND on one header and +3.3V and GND on the other 1×8 header. mikroBUS™ host connector perfectly fits into standard breadboards.
Click BOOSTER PACK is the add-on board for LaunchPad® from Texas Instruments® . It features mikroBUS™ host socket, allowing developers to use dozens of click™ add-on boards from mikroElektronika.
What are click™ boards?
Click™ boards are popular add-on boards in mikroBUS™ form factor. Each one carries a specific functionality, whether it is a communication layer, sensor, analog input, storage module, etc. Click™ boards are compact in size and are easily integrated into target devices, making them a great choice for fast prototyping. Each comes with user manual and a set of examples.
- AN: Analog pin
- RST: Reset pin
- CS: SPI Chip Select line
- SCK: SPI Clock line
- MISO:SPI Slave Output line
- MOSI: SPI Slave Input line
- +3.3V: VCC-3.3V Power line
- GND: Reference Ground
- PWM:PWM output line
- INT: Hardware Interrupt line
- RX: UART Receive line
- TX: UART Transmit line
- SCL: I2C Clock line
- SDA: I2C Data line
- +5V: VCC-5V Power line
- GND: Reference Ground
ONE SOCKET FOR CLICK ALL BOARDS
Just place the Click™ board you need into the innovative new mikroBUS™ socket and it’s ready to work right away. Adding new functionality to your LaunchPad® was never so easy.
for more information, please visit www.mikroe.com
Documents / Resources
 | MikroElektronika Click Booster Pack Adapter for Stellaris LaunchPad [pdf] Instructions Click Booster Pack, Adapter for Stellaris LaunchPad, Click Booster Pack Adapter for Stellaris LaunchPad |
