Kaptia Card Tag Programmer
Specifications
- Product Name: Card/Tag Programmer
- Compatibility: Kaptia Key Management System
- Connection: USB
- Power Source: USB
- Driver Requirement: Plug and Play (No additional drivers needed)
- Consumption <50mA
- Updatable No
Product Usage Instructions
- Connecting the Programmer
Connect the Card/Tag Programmer to your PC using the provided USB cable. - Managing Cards/Tags
Place the cards and/or tags on the programming area of the device. - Using the Kaptia Key Management Application
Follow the instructions provided by the Kaptia Key Management application to read and write data on the cards/tags. - Powering the Device
The programmer is powered via the USB connection to your PC. Ensure a stable power supply for uninterrupted usage.
Introduction
- This device is used to read and write cards and/or tags compatible with the
- Kaptia Key management system. It has a USB connection for connection to a PC.
- To manage the cards and/or tags, they must be placed on the card/tags programming area and follow the instructions of the Kaptia Key management application.
- This device is totally plug-and-play and does not need any additional drivers.
FAQ
Q: Do I need to install any drivers for the Card/Tag Programmer?
A: No, this device is plug-and-play and does not require any additional drivers.
Q: How do I know if my cards/tags are compatible with this programmer?
A: The programmer is designed to work with cards and tags compatible with the Kaptia Key management system. Ensure your cards/tags are compatible before use.
Q: Can I use this programmer with a Mac computer?
A: As long as your Mac has a USB port, you should be able to connect and use the Card/Tag Programmer without issues.
Documents / Resources
 | Kaptia Card Tag Programmer [pdf] User Guide Card Tag Programmer, Tag Programmer, Programmer |