GARD PRO GPU3 Smart Watch

Specifications
- Model: Smart Watch HVIN:GARD PRO ULTRA 3
- Main Interfaces: 5
- Menu Modes: Honeycomb, Rapids, Halo, List, Dial, Waterfall
- Charging: Magnetic head charging cable
Instructions
Quick User Guide for Watch
Turn on/off
- When the watch is turned off, charging or long pressing the down button for 3 seconds will vibrate the wristband to turn it on;
- When the watch is powered on, switch to the shutdown interface (“Settings” – “System Menu”) or press and hold the button for 3 seconds. A slide-to-shutdown/slide-to-restart/slide-to-call option will pop up. Select slide-to-shutdown.
Watch operation
- When the watch is in the on-state, raising your hand or pressing a button can wake up the watch, and swiping can switch between interfaces.
- The screen will turn off automatically after 5 seconds without any operation. Users can modify the screen timeout on the display and brightness settings page in the app or on the watch.
- The watch is set to enable 24-hour heart rate monitoring by default when it leaves the factory, and users can choose to enable or disable it in the general settings of the device interface in the app.
Device Connect
- Open the app, click “Device” – “Add Device” – “Select Device”, click on the corresponding model, and follow the prompts to connect.
- Bluetooth connection: After successful pairing, the APP automatically saves the Bluetooth address of the watch. Whenever the APP is opened or running in the background, it will automatically search for and connect to the watch.
- Data Synchronization: Manually pull down to synchronize data on the APP homepage; the watch can store 7 days of offline data. The more data there is, the longer the synchronization time will be, up to approximately 2 minutes.
- Synchronize Contacts: Enter the app, click “Device” – “Contacts” – “Open”, and select up to 100 contact names.
Watch Overview
Touch screen: Slide down to access the status bar, slide up to enter the frequently used functions interface, slide left to enter the functions interface, and slide right to view notifications.
- Up button
- Click: Enter the function menu, one-click return to the main interface/screen on (in standby mode).
- Long press: Enter sports mode Middle button.
- Click: Enter sports mode/screen on (in standby mode).
- Long press: Call SOS emergency contact Press the button.
- Click: Return to the previous level/Turn off the screen (in the main interface)/Turn on the screen (in standby mode). Long press: Power on/off.
- Charging: Align the magnetic head of the charging cable with the charging contacts on the bottom of the watch, and it will automatically attach for charging (positive attraction, negative repulsion).

Main interface
Main interface: The watch has 5 main interfaces. Long press on the main interface for two seconds, and after a vibration, a thumbnail view will appear. You can slide left or right to switch between watch faces. After the app is paired and connected, the watch will synchronize the time, date, day of the week, and other information with the phone.

Massive Watch Faces/Custom Watch Faces: Open the app, and when connected to a watch, click “Device” – “Watch Face Market” to enter the Watch Face Center to select or customize a watch face.
MENU
- There are 6 menu modes: Honeycomb, Rapids, Halo, List, Dial, and Waterfall. Click “Settings” and then “Main Image” to make your selection.

Function menu
- Calls, Daily Activities, Exercise, Exercise Record, Heart Rate, Sleep, Blood Oxygen, Body Temperature, Stress, Music, Voice Assistant, Weather, Compass, Altitude Barometer, Breathing Training, World Clock, Medication Reminder, UV Index, Notifications、 Stopwatch、 Alarm Clock、 Timer, Calculator, Remote Camera, Flashlight, Find Phone, Women’s Health, Settings.
Set menu
- Replace dial, language selection, screen-off display, display and brightness, sound and vibration, theme, password, time and date, do not disturb mode, motion recognition, lower button settings, overlay screen-off, QR code, system menu, about.
Precautions
- Please do not disassemble, repair, or modify this machine on your own.
- Please avoid subjecting your watch to strong impacts, extreme heat, and direct sunlight.
- This device uses a 5V 500MA charger. It is strictly prohibited to use an overvoltage or overloaded power source for charging.
- The operating environment for this device is between 0 degrees and 45 degrees. It is strictly prohibited to throw it into fire to avoid causing an explosion.
- When the watch gets wet, please wipe it dry with a soft cloth before charging, otherwise it may corrode the charging contacts This point leads to charging failure.
- Do not touch chemicals such as gasoline, cleaning solvents, propanol, alcohol, or insect repellents.
- Please do not use this product in a high-voltage or high-magnetic environment.
- If you have sensitive skin or wear your watch too tightly, you may feel discomfort.
- It is not advisable to wear a watch while taking a hot bath.
- Please promptly wipe away the sweat droplets on your wrist. Prolonged contact of the watchband with soap, sweat, allergens, or pollutants may cause skin irritation and itching.
- If you use your watch frequently, it is recommended to clean it weekly. Wipe it with a damp cloth and use a mild soap to remove any dirt or stains Remove oil stains or dust.
- No special requirements, please do not enable more push notifications.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Install the watch app
Scan the QR code below or visit major app stores to download and install “GloryFitPro”. Device requirements: iOS 11.0 or above; Android 5.0 or above, supports Bluetooth BLE 5.3.

FAQ
What should I do in case of interference with the device?
How do I customize watch faces?
Documents / Resources
![]() | GPU3 Smart Watch |
References
- User Manualmanual.tools

Si può tarare il misuratore di pressione sanguigna
Can the blood pressure monitor be calibrated?
Based on the user manual for the GARD PRO ULTRA 3, there are no specific instructions provided for calibrating the blood pressure monitor. The manual lists "Blood Oxygen" and "Heart Rate" as available functions, but it does not detail a calibration process for blood pressure within the GloryFitPro app or on the watch itself.
To ensure the most accurate readings possible for health metrics, the manual suggests the following:
Note: Smartwatch health readings are generally for reference only and should not be used for medical diagnosis. If you require precise blood pressure monitoring, it is recommended to use a dedicated medical-grade device.
Read the full Q&A page
L’orologio Gard pro ha applicazioni per la nautica?
Does the Gard Pro GPU3 smart watch have boating applications?
Based on the user manual for the GARD PRO ULTRA 3 (GPU3), there are no specific "boating" or "nautical" applications listed in the standard function menu. The watch includes general outdoor and navigation tools that may be useful for boating, such as:
The watch uses the GloryFitPro app for synchronization. While the manual mentions an "Exercise" mode, it does not explicitly list water sports or boating activities. Additionally, the manual advises against wearing the watch in hot baths and suggests wiping it dry immediately if it gets wet to prevent corrosion of the charging contacts.
If you are looking for specialized marine charts or sonar integration, this device does not appear to support those features natively.
Note: If you are referring to a different Gard Pro model, please specify, as features can vary between versions.
Read the full Q&A page