Divoom Blue tune Bean Bluetooth Speaker for Smartphones
Specifications
- Dimensions
68L * 45W * 92Hmm - Weight
107g - Output power
3W - Total peak power
6W - Driver Size
50 mm micro driver - Signal-to-noise ratio
75dB - Frequency response
60-20000HZ - Charging Voltage
5V - Bluetooth compliant
V3.0 - Bluetooth profile support
A2DP Stereo - Battery Capacity
400 mAh - Battery charge time
Minimum 2 hours - Playback time
6 hours - Brand
Divoom
Introduction
This is accomplished with the colorful, handy, and small Divoom Blue tune-Bean Bluetooth portable speaker and speakerphone. It has a clip to secure it to your pack or belt loop for hands-free, mobile use and connects to a variety of gadgets through Bluetooth. Each bean includes a standard rechargeable USB cable and a carabineer for attaching to a belt loop, backpack, bike, etc.
Bluestone-Bean is a portable wireless Bluetooth speaker with microphone capability; it works with all Bluetooth-enabled devices. You will be amazed at the incredible sound quality with such a small speaker.
CONTENTS
- 1 PC of Bluetune-BEAN speaker
- 1 pc of rechargeable USB cable
- 1 pc of manual
- 1 pc of the carabiner
Parts
- Power switch
- Microphone button
- USB charging port
- Speaker Unit
- Metal Loop
How to use it
- Open the Bluetooth function in your device
- Turn on Bluetune-BEAN, LED indicator starts blinking with blue quickly, enter pairing mode
- Search Blue tune-BEAN in your device and Connect Successfully
- It’s time to enjoy your favorite music.
When there is an incoming call:
Press …… to pick up the call
Press …… to hang up the call
How to charge it?
Standard USB rechargeable jack compatible with all PC USB ports and AC adaptors
Features
- Works with all Bluetooth-enabled devices: smartphones, tablets, and most notebooks
- Crystal clear and loud sounds for outdoor use
- Microphone capability makes it easy to take and make calls hands-free or in a group
- The fun, playful and colorful design makes it can be a wonderful gift.
- Each unit comes with a carabiner for hooking on a belt loop or backpack
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications made to this device not expressly approved by Shenzhen
Divoom Technology Co., Ltd may void the FCC authorization to operate this device.
Note
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Frequently Asked Questions
The “Divoom” is available on the App Store and Google Play™. You can find the mobile app by searching ‘Divoom’ in the application store.
Yes, the app is available for both platforms.
This feature is currently not supported, but we’re planning to release such a feature through future software updates.
Yes, you can rotate the top knob button to turn off the LED panel, or you can hold the top knob button to adjust the brightness.
Yes, go to Settings > Bluetooth, un-pair/disconnect the.
Please insert an SD card into the speaker. You can press
Please press the ‘switch audio source’ button (circular button, furthest away from the power button).
Please insert a pin into the reset port on the speaker’s rear panel (the one next to the AUX port).
Turn on Bluetooth by going to Settings > Bluetooth. To enable the Bluetooth search, open the “Divoom” app and tap the “magnify glass” icon. Please tap on the “Tivoo-light” when it appears on the list to connect to the LED screen.
Both the iOS and Android APP stores provide the Divoom app. You may look up “Divoom” online or scan this QR code. Please connect to a 2.4G wireless Internet network and switch on the phone’s Bluetooth. To pair the device, launch the app, choose Me > My device, and then click Internet.
Please check for a hole behind the speaker, adjacent to the USB charging connector, where you can reset the gadget. How is the device with the hole reset? Verify that the reset hole is the issue and not the charging indicator. Holding the lighting key down for 15 seconds (when it is ON) will reset the gadget.
