Home » DirecTV » Get help with DIRECTV error code 776 
What causes this error code?
Error 776 means your DIRECTV equipment isn’t communicating with your satellite dish. This usually happens because there are too many receivers or tuners connected to your SWiM (single wire multi-switch) power inserter.
Tip: Don’t move your receiver to another location.
Please call us at 800.531.5000 for further assistance.
References
Related Posts
DIRECTV error code 927This indicates an error in the processing of downloaded On Demand shows and movies. Please DELETE the recording…
DIRECTV error code 727This error indicates a sports “blackout” in your area. Try one of your local channels or regional sports…
DIRECTV error code 749On-screen message: “Multi-switch problem. Check that the cables are connected correctly and the multi-switch is working properly.” This…
DIRECTV error code 774This message means an error has been detected on your receiver’s hard drive. Try resetting your receiver to…
