Owner’s Manual
Digital Signal Processor 

ADSP10

PRODUCT DESCRIPTION-PRECAUTIONARY NOTES

The DSP is a digital signal processor essential to maximize the acoustic performance of your car audio system. It consists of a 32-bit DSP processor and 24-bit AD and DA converters. It can connect to any factory system, even in vehicles featuring an integrated audio processor, since, thanks to the. De-equalization function, the DSP will send back a linear signal. It features selectable High and low-level inputs as well as 3.5MM Aux and digital inputs that feed 8 completely variable output channels. Each output channel has a 31-band equalizer available.it also features a 66-frequency electronic crossover as well as. BUTTERWORTH or LINKWITZ filters with 6-24dB slopes and a digital time delay line. the user can select adjustments. That allows him or her to interact with the DSP through a remote control device called DRC.

WARNING: 1-a PC provided with Windows XP, Windows Vista, or Windows 7 operating system,1.5GHz minimum. Processor speed,1 GB RAM minimum memory, and a graphics card with a minimum resolution. Of 1024×600 pixels are required to install the software and set up the DSP. 2-Before connecting your DSP, carefully read this manual Improper connection may cause damage to The DSP or to the speakers in the car audio system.

PACKAGING CONTENTS

– DSP- Signal Interface Processor
– Power supply cablelRemotelwifi/Inputs
– 5.0m USB cable
– Control High Level Input
– 4 of 4.0*15 mm self-tapping, Cross-head fixing screws,

OPTIONAL:

– DRC(Digital Remote Control)control panel:
– 5.0 m DRC-AC Link cable

DSP AND DRC INSTALLATION

External dimensions

How to install

WARNING: do not use aggressive cleaning agents or abrasive cloth to clean the display. Simply use a soft cotton colth lightly damped with water.

CONNECTION PANELS-DESCRIPTION

SOFTWARE INSTALLATION

DSP GUI installation

1. Insert CD, Double-Click DSP
   

GUI OPERATION INSTRUCTION

Guide to GUI after installation

1. Double-click the icon of DSP-CONTROL
   
2. Enter the GUI you long for! Now you could tone every signal detail as experts do To bring sound effects on your beloved car to a higher level.if the password has been set, You need to enter the password.
   

Interface introduction

1. DSP interface guidance
   
2. ” FILE” MAIN MENU 1
   1. Connect(connect to the DSP)
   2. Language(choose you needed language)
   3. Open(To load the preset file in the PC folder)
   4. Save(To save setting to PC)
   5. Save as(To save another tile setting to PC)
   6. Restore Factory (To save the preset file in DSP)
   7. Modify Password
   8. Read From Device
   9. About
   10. Exit

3. INPUT MODE.
   To select different input devices.
   
4. CHANNEL SETTING.
   1. CH mode(2CH 4CH 6CH MIX).
   2. Input channel: 1. 2. 3. 4. 5. 6
   1. When highlighted red is selected, this channel input is indicated. If two or more are selected, this channel input is indicated
   2. 0° Click 0 ° to switch to 180 °, corresponding to the output of this channel
   3. Output channel: FL FullRange.FR FullRange. When you click the drop-down button, you can choose the state of the channel input. There is a Null.Front.Rear.Center.Subwoofer and FuII.Tweeter.Mid-T.Midrange. M-WF. Woofer.
   Options on the “Link are for combined settings for Left CH and Right CH. Options on the Left CH/right CH allow you to tone each selected channel respectively.
   
5. CROSSOVER X-TPE.
   To choose a different crossover type, for example, select CH selection on the 3RD spot .that would locate CH you want to choose for crossover configuration.
   
6. CROSSOVER FREQUENCY.
   Set frequency of LP/HP individually.
   
7. GAIN.
   0-40dB is the optional range for gain control kf every CH.
   
8. DELAY.
   1.Autoconfiguration(base on 1.5 setting).
   2. Manual configuration, change specifications in selected CH manually.
   
9. LP/SLOPE.
   1.6d B/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct 36dB/oct. 42dB/oct 48dB/oct are available.
   
10. HP/SLOPE.
    1.6dB/oct 12dB/oct 18dB/oct 24dB/oct 30dB/oct 36dB/oct.42dB/oct 48dB/oct are available.
    
11. Filter Model.
    To choose different Filter type Linkwitz Besse] Butterworth.
    
12. WRITE.
    To Write To Device(POS1-POS8).
    
13.  READ.
    To Read From Device(POS1-POS8).
    
14. X-OVER AND EQ CHARTS.
    1. Red lines and slopes will change accordingly when HP/LP of crossover and EQ are modified.
    2. EQ all frequency points can be moved left or right. For 20Hz-20KHz can be any Regulation.
    
15. EQ SETTING.
    Qvolue=1-12.
    

REMOTE INTRODUCTION

1. A.Main volume.
   B.When you press this button for a short time, It is in the”MUTE” state. And the close”MUTE”.
   C.When you press this button for a longer time(for a second),It will enter the menu mode.
   In the”MODEⁿor^HINPUT” flishing. You can adjust the mode which you want.
2. Main volume display window.
3. DSP mode display window(1-8).
4. Input display status.(CD.AUX.SPDIF.WIFI).

TECHNICAL FEATURES

D04-MEN097-00

Documents / Resources

AUDIO SYSTEM ADSP10 Digital Signal Processor [pdf] Owner's Manual ADSP10, Digital Signal Processor, ADSP10 Digital Signal Processor

References

• User Manual