APNX C1 PC Case
FAQs
- Q: What are the compatible motherboard brands for this product?
- A: The product is compatible with M/B ASUS, MSI, and GIGABYTE motherboards with XWD support.
- Q: How many SSDs and HDDs can be installed?
- A: The product supports installation of up to 2.5″ SSDs and 3.5″ HDDs.
- Q: Can I control the lighting effects of the fans?
- A: Yes, the product includes an RGB Fan Hub for controlling the lighting effects of the fans.
Accessory & Front I/O Cable
(Please refer to the motherboard’s manual for further instructions).
INSTALLATION AND USING INSTRUCTIONS
Connection Set Up User Guide
For ASUS Aura Sync, MSI Mystic Light Sync, and GIGABYTE RGB Fusion Motherboards
- Connect (A) to the motherboard’s PWM socket
- Connect (B) to the motherboard’s Addressable RGB socket
- For Non-Addressable RGB Motherboards
- Connect (A) to the motherboard’s PWM socket
Connect the 2-pin reset switch connector (D) with your hub.
Connect (C) to the PSU’s SATA connector
- Use the RGB fan connectors (E) to connect the Addressable
- RGB fans with your hub.
- Hold the LED control button for 3 sec to switch between the motherboard and button control
- Hold the LED control button for 6 secs to turn off the LED and press it once to turn it back on
Note:
- Specifications may vary depending on your region Contact your local retailer for more information.
- To learn more about how to connect your ARGB, please visit the product page at APNX.com.
Documents / Resources
 | APNX C1 PC Case [pdf] Installation Guide C1, C1 PC Case, PC Case, Case |
