Lavaudio DS600 Desktop Audio Decoder User Manual
Lavaudio DS600 Desktop Audio Decoder

What In The Box

What In The Box

Control Function

  1. Plug in the DC power cable, then choose to connect DS600 with PC through the USB cable or connect with CD player through Coaxial cable.
  2. The RCA OUT can connect with a headphone amplifier, a power amplifier and other device.
  3. Adjust a proper volume, then you can enjoy HiFi music.
    Control Function
    Control Function

Note: For Windows users, the driver need to be installed when first using. Please refer to “DS600 Driver & Installation Guide” and “DS600- Player Foobar2000 & JR”.

System Setting Interface

Setting Interface

  • Filter mode when playing PCM formatIMODE1-MODE7.
    MODE] 1: anodizing fast roll-off filter
    MODE2 : linear phase fast roll-off filter
    MODE3 : linear phase slow roll-off filter
    MODE4 : minimum phase fast roll-off filter
    MODES5 : minimum phase slow roll-off filter
    MODE6 : corrected minimum phase fast roll-off filter
    MODE7 : brick wall filter
  • Bluetooth system settings
  • Screen saver settings (Optional screen always on or automatic screen off)
  • Factory data reset(The default values of the system parameters of 1- are:MODE1,Bluetooth on, Automatic screen off.)
  • Note: When entering the system parameter setting interface, it will automatically exit it if there is no operation after 10 seconds

Troubleshooting

TroubleshootingCause AnalysisSolution
Noise when COAX / OP inputSignal format error or out of rangeCheck the input signal format
USB does not recognizeIncorrect USB connectionCheck or replace the USB cable
Computer USB port damagedChange another interface
OS problemReinstall the OS
Driver problemReinstall driver
No sound when USB inputComputer volume is too lowAdjust volume
Intermittent when USB inputPC is busy and the machine is hungWaiting for computer recovery
USB input, pop soundSoftware problemUpdate motherboard drivers
and system patches
If you still have problem or question, please contact us (support@1mii.com)

Specification

USB input16bit/44.1kHz-32bit/768kHz
DSD64-DSD512(Native)
Optical/ Coaxial input16bit/44.1kHz-24bit/192kHz
Bluetooth inputAAC/SBC/APTX/APTX LL/APTX HD/LDAC
PowerDC5V/0.5A- 0.25W
Size123.6x110x27.3mm
Weight510g

Product Parameter

Output Voltage2.8Vrms@OdBFS
THD+N<0.0002°/0@1 kHz A-weighing
Noise<2uVrms@A-weighing
Crosstalk-120dB@1 kHz
SNR122dB (B-Weighdted)

TND+N
TND +N

IMD Level Sweep (SMPTE)
IMD Level Sweep
Signal To Noise Ratio
Signal To Noise Ratio
Scan the code to get more information
QR code

1Mii Technologies Limited

We hope you never the need, but if you do, our service is friendly and hassle-free

Email icon Support@1mii.com   

Web icon web: www.1mii.com

FCC ID: 2AUFR-DS600
Icons

Documents / Resources

Lavaudio DS600 Desktop Audio Decoder [pdf] User Manual
DS600, Desktop Audio Decoder
lavaudio DS600 Desktop Audio Decoder [pdf] User Manual
DS600, rt5002, DS600 Desktop Audio Decoder, Desktop Audio Decoder, Audio Decoder, Decoder

References

Leave a comment

Your email address will not be published. Required fields are marked *