Laserliner 082.114A VideoScope 
XL Instruction Manual

Laserliner 082.114A VideoScope XL Instruction Manual

Completely read through the operating instructions, the “Warranty and Additional Information” booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and passed on together with the device.

Function / Application

This inspection camera features a micro-camera which sends colour video images to the LCD so that areas which are difficult to access (cavities, shafts, masonry or inside cars, for example) can be checked.

General safety instructions

  • The device must only be used in accordance with its intended purpose and within the scope of the specifications.
  • The measuring tools and accessories are not toys. Keep out of reach of children.
  • The structure of the device must not be modified in any way.
  • Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration. ­
  • The device must no longer be used if one or more of its functions fail or the battery charge is weak.
  •  The LCD unit must not be immersed in water.
  • The base unit must not come in contact with liquids.
  • ­ The camera head is not acid-resistant or fireproof.
  • ­ It is absolutely vital to ensure that the VideoScope XL does not come into contact with chemicals, current, moving or hot objects. This can damage the device and put its user at risk of serious injury. ­
  • The VideoScope XL must not be used for medical examinations / examining people. ­
  • Please ensure compliance with the safety regulations set out by local and national authorities with regard to the correct and proper use of the device. ­
  • The unit is not suitable for taking measurements close to dangerous voltages. Therefore always make sure that conductive parts are at zero potential when carrying out measurements in the vicinity of electrical systems. Safe isolation from the power supply and precautions to prevent systems being switched on again must be ensured by implementing suitable measures.

Safety instructions

Using artificial, optical emission (OStrV)

LED outlet

Laserliner 082.114A VideoScope XL Instruction Manual - LED outlet– The device works with LEDs of risk group RG 0 (exempt, no risk) in accordance with the latest versions of applicable standards relating to photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
-­ When used for the intended purpose and under reasonably foreseeable conditions, the accessible radiation of the LEDs is safe for the human eye and skin.

Safety instructions
Dealing with electromagnetic radiation ­
– The measuring device complies with electromagnetic compatibility regulations and limit values in accordance with EMC-Directive 2014/30/EU.
-­ Local operating restrictions ­ for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers ­ may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.

Laserliner 082.114A VideoScope XL Instruction Manual - Product Overview

  1. LCD
  2. ON/OFF
  3. Hot keys
  4. Operation indicator
  5. Battery compartment
  6. Camera head
  7. LED
  8. Lens
  • a Zoom in
  • b Zoom out
  • c Rotation 180° / Mirroring
  • d LED lighting +
  • e LED lighting ­

NOTE: The VideoScope XL delivers sharp images in a range between 3 and 7 cm from the camera head. Objects outside this range may appear blurred.

LCD

Laserliner 082.114A VideoScope XL Instruction Manual - LCD

  • a Battery status
  • b Zoom level
  • c Intensity of LED lighting (5 brightness levels)

First use

Laserliner 082.114A VideoScope XL Instruction Manual - First use

5 Functions during transmission of images
Line up the camera head on the flex cable and move it to the required position. If lighting conditions are poor, switch on the LED lighting. Zoom in on distant or small objects. The manual image rotation function enables the image to be mirrored and rotated by 180° on the monitor.

Laserliner 082.114A VideoScope XL Instruction Manual - Functions during transmission of images

Camera head / Focus

The VideoScope XL delivers sharp images in a range between 3 and 7 cm from the camera head.

Laserliner 082.114A VideoScope XL Instruction Manual - Camera head Focus

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.

Technical Data

Laserliner 082.114A VideoScope XL Instruction Manual - Technical Data

EU directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=AGP

Laserliner 082.114A VideoScope XL Instruction Manual - EU directives and disposal icon

Laserliner 082.114A VideoScope XL Instruction Manual - VideoScope XL

SERVICE Laserliner 082.114A VideoScope XL Instruction Manual - SERVICE
Umarex GmbH & Co. KG ­ Laserliner ­ Möhnestraße 149, 59755 Arnsberg, Germany
Tel.: +49 2932 638-300,
Fax: +49 2932 638-333
[email protected]

Laserliner 082.114A VideoScope XL Instruction Manual - EU directives and disposal icon

Umarex GmbH & Co. KG Donnerfeld 2 59757 Arnsberg, Germany Tel.: +49 2932 638-300,
Fax: -333
www.laserliner.com

Laserliner Logo

Documents / Resources

Laserliner 082.114A VideoScope XL [pdf] Instruction Manual
082.114A, VideoScope XL, 082.114A VideoScope XL

References

Leave a comment

Your email address will not be published.