LANBON L8 LCD Smart Switch- EU Standard User Manual

L8 Introduction:
L8 series is new launched smart switch with LCD touch screen. One switch can be switched to 5 different switches, you can also change the switch icon and name, it is more intuitive and convenient to use. It supports voice control, APP control, and remote control at the same time, it will bring a new experience to your life, thank you for your choice.

Before you install

Warning!
Improper installation can be dangerous or illegal. Multiple circuit breakers might need to be powered off for safe installation, if you are not familiar with electrical work, please call a professional electrician. Make sure your wiring is compatible. Landon Dimmer can replace only monopole Switch, if your lights can be operated from two different wall switches, that is bidirectional switch, Landon Dimmer is not compatible.

Wiring Diagram

1. One Gang Wiring Diagram	2. Two Gang Wiring Diagram	3. Three Gang Wiring Diagram

L8-HS (1/2/3gang light switch)

4. Curtain Switch Wiring Diagram	5. Scene Switch Wiring Diagram

6. Thermostat Switch Wiring Diagram	7. Dimmer Switch Wiring Diagram	8. Boiler Switch Wiring Diagram

About account

Register account with your mobile phone or email address
Enter your account and password to log in, you can also switch multiple accounts.

Interface of the switch

Understand the main interface of the switch

Whether the switch is connected to the router
(White means connected, red means not}
Number of devices, represents the total number of L8 switches under the current router
Current time
The amount of power used by the switch since it was installed
Three gang switch

Operating interface of the switch

gang, 2 gangs, 3 gang switch
Simply click the button on the switch to turn it on or off Very convenient and fast.
Dimmer switch
Press and hold the circle to control the brightness of the light.
Curtain switch
1. Adjust by percentage
2. Button control
Boiler switch
1. Display water heater status
  Water heater control button
2. OFF
3. ON
4. On for 30 minutes
5. On for 60 minutes
6. Custom settings
Thermostat switch
1. Set temperature
2. Green mode
3. Current room temperature
4. Turn the thermostat on or off 5. Decrease 1 degree
6. Increase 1 degree
7. Quick temperature setting
Scene switch
Simply click the button on the switch to turn on or off scene
Can change scene on the phone, how to change the scene, please read P25

Switch setting interface

Long press to enter setting interface
Setting interface introduction

Delay function

Delay setting

Green mode setting

4. Green mode
5. Time setting
6. Run green mode

Timing function

8 timer setting

Press blank area enter
8 group timer
3. Choose status of each switch
4. Choose repeat time
5. Set atime. the switch will turn on/off automatically Setting interface

Change switch mode1

Setting interface

Change switch in setting

Change switch style

Setting interface introduction

1. Choose switch interface
2. Power off memory :stay the status when power off, cancel the status when power off.
3. 3 style option
4. Restore to factory set
5. Screen touch calibration
6. Screen brightness
7. Bright time setting

Style (A. European style, B. Lovely style, C.simple style can also choose the style in-app, Detailed operation please refer to P14

WiFi configuration1

Press wifi setting, enter WiFi configure interface (wired means configuration failed)
Open App
Mobile phone scan the QR code on switch
1. Input right WI-Fl password
2. Scan the QR code on switch
3. Changename
4. Changeicon
5. Press and choose the icon from below gallery. can aslo take photo as icon (Only switches with version above 1.0.24 support)
Switch and app configuration succeeded

Warranty card

Warranty clause:
Within 3 months from the date of purchase, free replacement 2 years warranty Damage caused by following reasons, no free repairing Beyond the prescribed warranty period Damage caused by operation not following instructions Users dismantle, repair, and other man-made damage

User name
Phone number
ID number
Address
Sellers
Purchase date
Repairing record

Remind: Please save this card. Bring this card and product together to local agent to repair.

Certificate
Voltage: 100V-250V
Frequency: 50Hz-60Hz
Output: 10A/16A
Inspector: ______________
Date: __________________

This product passed strict inspection, ease of use.+

Scan and download app
Or get more technical support


http://www.lanbon.cn/en/app.html	http://www.lanbon.cn/en/support.html

If need more, please contact

Shenzhen Lanbon HI-Tech CO, Itd
B44 lanbon@lanbon.cn
8 http://www.lanbon.cn/
9 3rd Floor, ZhanRun Business Building. Yunfeng Road NO.1, QueShan Industrial Ared, Dalang, Longhua district, Shenzhen, China

Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

Documents / Resources

LANBON L8 LCD Smart Switch- EU Standard [pdf] User Manual
L8HS, 2ASYZ-L8HS, 2ASYZL8HS, L8, LCD Smart Switch- EU Standard, L8 LCD Smart Switch- EU Standard, Smart Switch- EU Standard

References

User Manual

Company profile and pre-installation Instructions