zalman P10 Mini Tower Computer Case User Manual

* To ensure safe and easy installation, please read the following precautions.
* Product design and specifications may be revised to improve quality and performance without notice.

Precautions

Read this manual carefully before installing.
Check the product and components before installing. If you find any abnormalities, contactthe location where you purchased the product for a replacement or refund.

Wear gloves to prevent accidents when installing the product.
Do not apply excessive force, as severe damage may occur when mounting the system.

Always refer to the manual when connecting cables, as incorrect installation may cause a shortcircuit and result in a fire.
Be careful not to block the ventilation holes of the product when using the system to avoidoverheating.

Avoid areas with direct sunlight, water, moisture, oil, an excessive dust. Store and use theproduct in a well-ventilated area.
Do not use chemical cleaners, such as organic solvents like alcohol or acetone, to clean theproduct’s surface.

Do not insert your hand or other objects into the product during its operation, as this may injure your hand or damage the object
Store and use the product out of children’s reach.

Our company assumes no responsibility for any problems that occurs due to the use of the product forpurposes other than its designated purposes and/or the carelessness of the customer.
The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Specifications

Accessories component

UO Ports

1. Removing the front panel

2. Removing the side panels

3. Motherboard installation

3-1. Motherboard size

4. Graphic card installation

4-1. Graphic card holder

5. 2.5° SSD installation

6. 2.5″ and 3.5° SSD / HDD installation

7. PSU installation

8. Radiator installation

1) Installing the top radiator 120mm, 240mm

2) Installing the rear radiator 120mm

9. Fan Installation

1) Installing the top fans
• 3x120mm,2x140mm

2) Installing the rear I bottom fans
• 1 x120mm/3x120mm

10. Fan(s) Included/ Fan Specifications

11. I/O Connectors

This mark, design1d byZalman, indicates product compliance (Restriction mark, wof ith designed the by ZaEuropean lHazardousSubstances) man, Uni indoni ‘cas tes DirecRoHS tproductve.

Disposal of Oki Electrtcal & Electronic Equipment (Applicablein tie European Union and oil a- Eu ro1Ban countries with separate collection systems)

Documents / Resources

zalman P10 Mini Tower Computer Case [pdf] User Manual
P10 Mini Tower Computer Case, P10, Mini Tower Computer Case, Tower Computer Case, Computer Case, Case

References

User Manual

zalman P10 Mini Tower Computer Case

Developed and designed by ZALMAN in Korea.