ViABECS CAN008-X Harness with Simple Soft Canbus Box
Harness with Simple Soft Canbus Box
- Check if your vehicle’s factory radio matches the provided picture below.
- Connect the cable plug that matches your car’s head unit.
Note: Not all plugs need to be connected. Please note that some factory features may be lost if the factory radio is removed, such as a CD player.
Model A
Support factory SWC, Bose AMP, Backup Camera or 360 Camera, USB, A/C info
Model B
Support factory SWC, Bose AMP, Backup Camera or 360 Camera, USB, A/C info
Model C
Support factory SWC, Bose AMP, Backup Camera or 360 Camera, USB, A/C info
Temperature A/C Control Amplifier
Keep the factory temperature A/C Control Amplifier and install it back. Then connect it to the original harness. Afterward, the factory A/C will display on our head unit. CAN008-X Harness comes with a Simple Soft Canbus box,
Note: Please set up the canbus option after you finish the canbus harness. You can contact your radio seller to get the correct canbus option.
- Correct Canbus Option: 03: Simple Soft – 71: Nissan – 01: 2013 Altima – Public
- Video: How to Set Up Canbus Option https: //www.youtube.com/watch?v=oRcBn3C6uns
Wiring harness connection diagram
- GND line to cthe iron part to reduce Noise
- Canbus box
- Male rear camera
- 1 OPIN female CAM VIN & Wifi Line
- 4PlN USB adapter
- Red: Male AUX R OUT to Female AUX R IN
- White: Male AUX L OUT to Female AUX L IN
- 8PlN Canbus Port
- O FM/AM radio antenna adapter
- O, you need to connect them if you connect the 40PlN connector.
If you need assistance or have inquiries, please contact ViaBecs Tech for help. Click our Store Name and then find”Ask a Question”. Then you can contact us.
Documents / Resources
 | ViABECS CAN008-X Harness with Simple Soft Canbus Box [pdf] Instruction Manual Model A, CAN008-X Harness with Simple Soft Canbus Box, CAN008-X, Harness with Simple Soft Canbus Box, Simple Soft Canbus Box, Soft Canbus Box, Canbus Box, Box, Harness |