UCTRONICS Raspberry Pi Cluster Assembly

Package Contents

8cmx8cm Fan x2	Side panel x2	Top panel x1c	Raspberry Pi baseplate x4
Fan baffle x1	Countersunk screw for top panel and RPi baseplates (M2.5*4) x 12	Fan screw x8	Round head screw for RPi boards (M2.5*4) x 16

Exploded view

Assembly Steps

1. Align the mounting holes of the fan with those on the side panels, and fix  tightly with 4 fan screws in the middle position;
   
2. Align the mounting holes of the fan baffle with those on the side panels, and fix the fan baffle with 4 screws in the four corners
   
3. Align the mounting holes of the top panel with those on the two side panels, and fix with countersunk screws;
   
4. Insert the Raspberry Pi baseplate, and then fix it with M2.5 screws.
   

Wiring

Fan SPEC

Documents / Resources

UCTRONICS Raspberry Pi Cluster Assembly [pdf] User Manual UCTRONICS, U6183, Raspberry, Pi, Cluster, Assembly

References

• User Manual