PART # SLC-D010
D010 SLC S2
SYMBOLS AS SHOWN
ON SUBMITTAL AND
CONSTRUCTION
DOCUMENTS
INSTALLATION INSTRUCTIONS
SMART LOAD CONTROLLER 0-10V DIMMER
TIPS / NOTES
- SMARTNET PORTS – RJ45 CONNECTIONS
- 0-10V WIRES
- STATUS LED
- MANUAL OVERRIDE BUTTON
PRESS AND RELEASE = TOGGLE RELAY ON/OFF
PRESS AND HOLD = COMM CHECK (SOLID BLUE STATUS LED = COMM PRESENT WITH RM OR SP) - STANDARD 4″ SQUARE ELECTRICAL BOX – NOT INCLUDED
- 1-1/2″ EXTENSION RING – PROVIDED WITH SMART LOAD CONTROL MODULE – MUST BE INSTALLED FOR WARRANTY COVERAGE
- SMART LOAD CONTROL MODULE
SMART LOAD CONTROLLER 0-10V DIMMER CONNECTIVITY
|
LED INDICATION |
||
| LED COLOR | DESCRIPTION | INDICATION MEANING |
 |
GREEN | RELAY IS CLOSED WITH LINE VOLTAGE |
| BLINK
|
BLINKING GREEN | RELAY IS CLOSED WITH NO LINE VOLTAGE |
 |
CYAN | RELAY IS OPEN WITH LINE VOLTAGE |
| BLINK |
BLINKING CYAN | RELAY IS OPEN WITH NO LINE VOLTAGE |
|
CABLE TYPES |
|||
| LINE ID | DESCRIPTION | TYPE | NOTES |
 |
SMART | CAT 5 (MIN) | TOTAL SMARTNET LENGTH NOT TO EXCEED 400′ |
Touché Lighting Controls
(a Product of ESI Ventures)
A: 2085 Humphrey Street,
Fort Wayne, IN 46803
T: 888.841.4356
W: ToucheControls.com
Documents / Resources
 |
Touch Controls SLC-D010 Smart Load Controller 0-10V Dimmer [pdf] Installation Guide SLC-D010, SLC-D010 Smart Load Controller 0-10V Dimmer, Smart Load Controller 0-10V Dimmer, Load Controller 0-10V Dimmer, Controller 0-10V Dimmer, 0-10V Dimmer, Dimmer |
