reolink NVS4 4-Channel PoE Network Video Recorder Instruction Manual
If you want 24/7 video recording or if you have multiple IP cameras to manage, NVS4 is your best choice. You can choose up to 4 cameras (not included) to work with this NVR and build your own video surveillance system. NVS4 features PoE (Power over Ethernet), with a single network cable connecting each of your IP cameras to the NVR for both power supply and video signal transmission. Easy wiring – the wiring process cannot be simpler for DIY enthusiasts.
1. Specs
2. Setup and Install
Set up the System
What’s in the Box
Note: The package content may vary and update with different version and platforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product selling page. NVS4
Connection Diagram
Before initialization, please connect the cameras to the NVR and power on the NVR.
1. Connect the NVR’s LAN port to router with an Ethernet cable, and connect the mouse to the USB port of the NVR.
2. Connect the NVR to a monitor via HDMI/VGA.
Note: There is no VGA cable included in the package.
3. Connect the PoE cameras to PoE ports of the NVR.
4. Connect the power adapter to the NVR, and switch on the NVR. Network (LAN)
Set up the NVR System on the Monitor
A setup wizard will guide you through the NVR system configuration process.
Please set a password for your NVR (for the initial access) and follow the wizard to configure the system.
Step 1. After turning on the NVR system, you will see the splash screen below.
System booting up might take a few seconds.
Step 2. General Configurations. Set up the language, screen resolution, date format, and time format. Then click Next.
Step 3. DST settings. Set up the system time and time zone, and enable/disable the DST option. Then click Next.
Step 4. Create a login password for your NVR, and enable/disable screen auto-lock. Then click Next.
Step 5. Set up password security questions. Then click Next.
Step 6. Name your device and manage your HDD. Then click Next.
Step 7. Configure the network for your NVR.Then click Next.
Step 8. Set up email alerts for your NVR up to your need.Then click Next.
Step 9. Initialization finished! You can start to use the NVR system now.
Access the NVR System via Reolink App
You can add the NVR to Reolink App for easy access via smartphone.
Step 2. Scan the QR code on your NVR, or tap Input UID/IP to enter the UID of the NVR (a 16-digit number under the QR code). Then tap Next.
Step 3. Enter the username and login password for the NVR. By default, the username is admin. And the password is the one you created during initialization.
Step 4. Done! You can start to live view now.
Read More About This Manual & Download PDF:
Documents / Resources
 | reolink NVS4 4-Channel PoE Network Video Recorder [pdf] Instruction Manual NVS4, NVS4 4-Channel PoE Network Video Recorder, NVS4, 4-Channel PoE Network Video Recorder, PoE Network Video Recorder, Network Video Recorder, Video Recorder, Recorder |