OPTONICA 6392 6 Channel DMX Sliding Fader Console
Features
- Ideal Cost Efficient 6 Channel Mini DMX Fader Console
- Easy Usage
- Suitable for permanent installations by using available brackets
- Ideal for Sample Testing and Trouble-Shooting on-site or workshops
- Powered by 3 x AAA Batteries or external 5-12V Power-Supply
- 3 Digit LED Screen 0 –100% or DMX000 –DMX255 (Settings by internal DIP-Switch)
- 6 Channel Mode or 5 Channel & Master Mode (Settings by internal DIP-Switch)
Technical Parameters
| Input and Output | |
| Input voltage | 5-12VDC or 3 x AAA |
| Work current | < 10mA |
| Output signal | DMX512 |
| Channels | 6 |
| Environment | |
| Operation temperature | Ta: -30 OC ~ +55 OC |
| Case temperature (Max.) | T c:+65OC |
| IP rating | IP20 |
| Safety and EMC | |
| EMC standard (EMC) | EN55032:2015, EN61000-3-2:2014, EN61000-3-2:2013, EN55024 :2010/A1:2015 |
| Safety standard(LVD) | EN 61347-1:2015 EN 61347-2-11:2015 |
| Certification | CE,EMC,LVD |
| Warranty and Protection | |
| Warranty | 3 years |
| Protection | Reverse DC Polarity |
Mechanical Structures and Installations
Battery Installation
Wiring Diagram
Note:
- The two DMX decoder first address need be set as 1 and 4, each decode 3 channel DMX data.
- The 1-2bit DIP switch is used to to set 0-255 or 0-100 display, 6 channel or 5+1 channel output.
The 3th DIP switch is used to switch battery power input.
The factory setting is 0-255 display and 6 channel output. - DIP switch setting:
For 5+1 channel output, the DMX dimmer only output 5 channel DMX data, the sixth pushrod is used to adjust the overall brightness of 1-5 channel.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Documents / Resources
 | OPTONICA 6392 6 Channel DMX Sliding Fader Console [pdf] Instructions 6392 6 Channel DMX Sliding Fader Console, 6392, 6 Channel DMX Sliding Fader Console |
