Q Series High-Performance Interactive Display Solution
Installation Guide
How to Install Wi-Fi Modules
Perform the following steps to install the Wi-Fi Module on the Q Series.
- Unscrew the 2 screws on the Wi-Fi Module port and remove the shielding cover.
- Insert the Wi-Fi Module into the port on the rear of the panel until firmly seated, using the 2 screws to secure it.
Caution
The Wi-Fi Module does not support hot plugging. Therefore, you must insert or remove the Wi-Fi Module when the display is powered off.
Otherwise, the displays or Wi-Fi Module may be damaged.
Contact Us
Still, need additional assistance? Contact our Technical Support Team at 833-469-9520, ext 5000, or support@newline-interactive.com.
Documents / Resources
 | newline Q Series High Performance Interactive Display Solution [pdf] Installation Guide Q Series, High Performance Interactive Display Solution, Q Series High Performance Interactive Display Solution |
 | newline Q Series High Performance Interactive Display Solution [pdf] User Guide Q Series, High Performance Interactive Display Solution, Q Series High Performance Interactive Display Solution |
