CUQI 7 Inch Touch Screen Monitor for Raspberry Pi User Manual
Thank you for visiting our shop and purchasing our products. For the less proficient Raspberry Pi novice players, we provide a website with b detailed instruction below, and hope it will make you feel helpful.
http://www.lcdwiki.com/7inch_HDMI_Display-C
Product Features
- 7’’ standard display, 1024 × 600 hardware resolution, up to 1920×1080 software configuration resolution.
- Capacitive touch screen, maximum support 5point touch.
- Support backlight control alone, the backlight can be turned off to save power.
- Support Raspberry Pi, BB Black, Banana Pi and other mainstream mini PC.
- Can be used as general-purpose-use HDMI monitor, for example: connect with a computer HDMI as these con d display.
- Used as a raspberry pi display that supports Raspbian, Ubuntu, Kali-Linux, Kodi, win10 IOT, single-touch, free drive.
- Work as a PC monitor, support win7, win8, win10system 5 point touch (XP and older version system: single-point touch), free drive.
- CE, RoHS certification
How to use with Raspbian/Ubuntu Mate/Win10IoTCore System?
Step 1, Install Raspbian official image
- Download the latest image from the official download.
- Install the system according to the official tutorial steps.
Step 2, modify the “config.txt”
After the programming of Step1 is completed, open the config.txt file of TF card root directory and add the following code at the endof
the file, save and eject Micro SD Card safely:
After the programming of Step1 is completed, open the config.txt file of TF card root directory and add the following code at the endof
the file, save and eject Micro SD Card safely:
max_ usb _current=1
hdmi_ force_ hotplug=1
config_ hdmi_ boost=7
hdmi_ group=2
hdmi_ mode=87
hdmi_ drive=1
display_ rotate=0
hdmi_ cvt 1024 600 60 6 0 0 0
hdmi_ force_ hotplug=1
config_ hdmi_ boost=7
hdmi_ group=2
hdmi_ mode=87
hdmi_ drive=1
display_ rotate=0
hdmi_ cvt 1024 600 60 6 0 0 0
Step 3, Drive the 7” HDMI Display with Raspberry
Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if
the display and touch both are OK, it means drive successfully(please use the full 2A for power supply). If you have difficulty installing the driver, or if you still can’t use the display properly after installing the driver ,please visit this website below to download Confined images for tested J ust need download and write the image into the TF card. DO NOT need any driver installation steps.
the display and touch both are OK, it means drive successfully(please use the full 2A for power supply). If you have difficulty installing the driver, or if you still can’t use the display properly after installing the driver ,please visit this website below to download Confined images for tested J ust need download and write the image into the TF card. DO NOT need any driver installation steps.
And there are some manuals for novice RPI player onit. Please browse or download according to your needs. http://www.lcdwiki.com/7inch_HDMI_Display-C
Documents / Resources
 | CUQI 7 Inch Touch Screen Monitor for Raspberry Pi [pdf] User Manual 7 Inch Touch Screen Monitor for Raspberry Pi, 7 Inch, Touch Screen Monitor for Raspberry Pi, for Raspberry Pi, Raspberry Pi |
