CHN Spec ColorMeter Pro Color Test Equipment Instruction Manual

ColorMeter Pro Color Test Equipment

ColorMeter Pro Operation Instruction
productum introductio
Placere legit haec apud usura manual diligenter in opus.

dux Velox

Warantum instructions

1.Scan QR code to get mobile App

2.Power on and measure

L*:89.6 a*:75.9 b*:15.5

or

L*:89.6

a*:75.9

L*:89.6 a*:75.9 b*:15.5

b*:15.5

In virtute

APP Measurement

3.How to measure color difference
Longum torcular 2s

L*:50.9 a*:13.5 b*:14.4

dL*:-da*:-db*:-dE*ab:–

dL*: 2.8 da*: -1.5 db*: 1.9 dE*ab: 3.7
non

Mensurae vexillum
off 4.Power

Transfer to test Measure the samput le

ad sample

get the color difference

Longum torcular 5s

admonitio
It is recommend that keep the packing box for at least 30 days as the packing box is required to ensure the safety of transportation.
Non warranty regulations
1.Unauthorized repair,misuse,accident,modification,use of nonofficial accessories.
2.Instrument is out of warranty. 3.Damage caused by force. 4.Not the performance failure listed in the product performance
failure table. 5.Performance failure caused by human factors.

Contact Manufacturer: Address:
Tel: Website:

Hangzhou CHNSpec Technology Co.,Ltd No.166,Wenyuan North Road,Jianggan District
Hangzhou,China +86 571 85888707 www.chnspec.com

Admonitio
cDo not attempt to disassemble or replace any part of the equipment.Please contact the agent or official customer service for after sales service.
cDo not place the equipment near heat source or directly expose to the fire.
cIf any liquid enters the equipment,please power off the equipment immediately.
cThis product contains small parts.It may cause suffocation and other hazards,if swallowed by children.

test button

screen
Calibration Cover Test aperture

Productum perficientur defectum mensa

nomine

Euismod defectum

Morbi

Name:

Colorimeter

Geometry and Angle:

D/8-SCI

Calibration:

Automatic

Color Value:

Spectral Reflectance

CIE-Lab,CIE-LCh,HunterLab,CIE-Luv,XYZ,Yxy,RGB

ColorDifference(E*ab,E*cmc,E*94,E*00)

WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC

Hunter,TaubeBergerStensby)

YI(ASTM D1925,ASTM E313-00,ASTM E313-73)

Blackness(My,dM)Color fastness,Tint(ASTM E313-00)

ColorDensity(CMYK(A,T,E,M)),Milm

Munsell,Opacity,Dye strength,ColorStrength

Lux source:

LED(Full Scale Visible Wavlength Range)

Lighting condition: A,B,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6 F7,F8,F9,F10,F11,F12,CWF,U30,DLF,NBF,TL83,TL84,U35

Angle of field:

2°, 10°

Lighting source:

LED(Full Scale Visible Wavlength Range)

repeatability:

dE*ab0.1

apertura:

8mm

Necem Intervallum:

10mm

Necem jugum:

400 700nm,

Tempus mensurae:

1sec

altilium:

10,000 continuous test per-charge

screen,

ColorLCD,135*240,1.14inch

interface:

Bluetooth et USB

ColorMeter Pro 1.The equipment can’t power on. 2.The equipment’s button can’t work normally. 3.Equipment screen fails to work normally. 4.Equipment lightsource fails to work normally. 5.Bluetooth can’t connect.

*Parameters are subject to change without notice

Thank you for purchasing ColorMeter Pro

Qualified Tested

INDICIUM FCC:
Haec fabrica cum Parte XV de Regulis FCC obtemperat. Operatio subiacet his duabus condicionibus: haec fabrica detrimentum impedimentum causare non potest, et haec machina quaelibet impedimenta accepta debet accipere, etiam impedimentum quod operatio necopinata causare potest. Monitum: Mutationes vel modificationes non expresse approbatae factionis responsalis obsequii posse evacuare auctoritatem usoris ad apparatum operandum.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documenta / Resources

CHN Spec ColorMeter Pro Color Test Equipment [pdf] Instructio Manual
COLORMETER, 2AZHX-COLORMETER, 2AZHXCOLORMETER, ColorMeter Pro Color Test Equipment, Color Test Equipment, Test Equipment

Leave a comment

Curabitur sit amet nisl.