The Inpods 12 User Manual provides comprehensive instructions on how to use, charge, and connect the Inpods 12 earbuds. With a driver size of 15mm and an impedance of 9 OHM, these earbuds have a Bluetooth version of 5.0 and a Bluetooth distance of up to 10 meters. The manual outlines the steps to follow to pair the earbuds with a device, including turning on Bluetooth in the device, searching for i12, and connecting to i12. Additionally, the manual provides product notes, including talk time and music time of about 2-3 hours when using a pair of earphones together and a charging time of 1-2 hours. The Inpods 12 also features a powerful noise de-noising circuit for active noise reduction. The FAQ section of the manual provides answers to commonly asked questions, such as how to turn on/off the earbuds, how to answer a call, and how to check the battery status. The manual also addresses concerns regarding connectivity, charging issues, and compatibility with different devices.

Inpods-LOGO

inpods 12

inpods-12-PRODUCT

inpods 12

Specifications

  • Driver: 15mm
  • Impedance: 9 OHM
  • Bluetooth version: Bluetooth 5.0
  • Bluetooth distance: 10 meters
  • Operating voltage range: 3.0V-4.2V
  • Charging time about 1-2 hours .

How to Use i12 inpods:

1. Tap the charging case power on switch
2. Open the charging case and take off the earbuds
3. The earbuds will auto-power on and enter pairing mode (important reminder: to auto-power-on the earbuds, the switch on the charging case must be turned on)
3. Pair with the device:
3.1 turn on Bluetooth in the device
3.2 search i12 and connect to i12

Product Notes:

  • Talk time is about 2-3 hours (a pair of earphones use together ),music time about 2-3 hours (a pair of earphones use together ) , Charging box can charge for the earphons about 3-5 times.
  • Powerful noise de-noising circuit (active noise reduction)
  • Output power: 40mW;Battery capacity 35MAH , charging box is 300mh .
  • Frequency response: 20-20000Hz
  • Powerful noise de-noising circuit (active noise reduction)

Specifications

Product Specifications

 

 

Driver

15mm

 

Impedance

9 OHM

 

Bluetooth version

Bluetooth 5.0

 

Bluetooth distance

10 meters

 

Operating voltage range

3.0V-4.2V

 

Charging time

About 1-2 hours

 

Output power

40mW

 

Battery capacity

35MAH

 

Charging box capacity

300mh

 

Frequency response

20-20000Hz

 

FAQ’S

Why can’t I connect to the earphones?

Please check if your phone supports Bluetooth 5.0 and make sure the earphones are turned on. Also, please try to put the earphones closer to your phone.

How do I pair with my device?

Turn on Bluetooth in your device, search for i12, then connect to i12.

How long does it take to charge?

It takes about 1-2 hours to charge fully.

What is the battery life of a single earbud?

About 2 hours talk time and music time about 2 hours (a pair of earphones use together ).

Are Inpods 12 and i12 the same?

The i12 tws and the Inpods 12 are a very cheap alternative to the well-known white earbuds from a fruity American brand. And wow, they can be so good. You can, because you just have to have the right one. In the meantime, lesser ears are also called ‘i12’.

Is inPods 12 waterproof?

The i12 TWS AirPods is waterproof and can withstand sweat or splashing during daily exercise, which is suitable for running or exercise wearing.

Does inPods 12 have mic?

A one InPods 12 Earbud BT 5.0 Wireless Headphone with Mic (Bluetooth) Bluetooth Headset (Yellow, True Wireless) The inPods 12 TWS 5.0, True Wireless Stereo is newest addition to wireless bluetooth headphones.

How do I turn off my inPods 12?

How to turn on /off the i12 TWS?
Power on: the two i12 TWS earbuds will turn on and pair each other automatically after taking out from the charging case.
Power off: long-press the power button.
Note: Delete the paired information: in pairing mode, 5 click the power button until LED-lit RED.

How do you answer a call on i12?

How to answer the phone call with i12 TWS earbuds? Answer/End call: press once power button. Reject call: double press the power button.

What does blue light on i12 mean?

The i12 TWS will be matched into a normal red and blue flash of one headset, and the other headset will flash a blue light every 5 seconds. Step 3: At this point, you can connect to Bluetooth and use two i12 TWS headphones synchronously. Note: Repeat step 2 if the match is not successful.

How do you check an Inpod battery?

After installing the app, open the lid on your AirPods’ charging case and a popup — similar to the one you get on iPhone — will show up on your Android device. Battery stats for the case and each AirPod will be displayed.

Why isnt my left i12 working?

Step 1: Delete the left and right earbuds pairing information (Reset the i12 TWS). In pairing mode, 5 click the power button until LED lit RED. Step 2: Long press the function key for 5 seconds to turn on the i12 TWS. Step 3: Enter pairing mode, pairing time is about 5 seconds, prompt tone “pairing mode”.

Why are my Inpods not charging?

Check your connections. If you have AirPods or AirPods Pro, make sure that the Lightning to USB cable is firmly plugged into the charging case and USB power adapter. Then make sure that the power adapter is correctly plugged into a power outlet.

References

Join the Conversation

30 Comments

    1. does it turn off or just turn off the light?
      Because once the headphones pair with each other, one of them keeps flashing until it pairs with another device, but it’s still on.

      ele desliga ou só apaga a luza?
      Porque assim que os fones pareiam entre si, um dele continua com a luz piscando até emparelhar com outro dispositivo, mas continua ligado

  1. it depends on what you are doing if they are Idle for 30 sec with power off as in if you aren’t listening to anything.

  2. Why turn on this case? Even though I knock and cut, nothing turns on.

    Po co włączyć to etui? Mimo tego, że stukam i przytszymuję nic się nie włącza.

  3. Why do you need to turn on this case? What to do if I do not want to turn on even though I click / tap / hold this button?

    Po co trzeba włączać to etui? Co zrobić jeżeli mi nie chce się włączyć mimo tego, że klikam/stukam/przytrzymuję ten guziczek?

  4. Hello, I would like to ask if they are somehow shutting down or should I just leave them in the box and wait for them to shut down on their own?

    Dobrý den, chtěla bych se zeptat jestli se nějak vypínají nebo je mám proste nechat v krabičce a počkat až se vypnou samy?

  5. How can I change the language of the iPods from Chinese to English?

    Come posso cambiare la lingua delle inpod dal cinese all’inglese?

    1. before pairing with any device, tap three times on one of the headphones

      antes de emparelhar com algum dispositivo, toque três vezes em algum dos fones

      1. Hello, I charged my inpods it’s been 2 hours but the light is still red, is this normal?
        Bonjour, j’ai charger mon inpods ça fait 2h mais la lumière est toujours rouge, est ce normal ?

    2. How can I change the language to English?
      Or do a factory reset
      كيف يمكنني تغير اللغه الي الانجليزيه
      أو عمل ضبط مصنع

  6. I can’t recharge them, in their refill container, is there by any chance an ignition to press?
    Is the charging plug fully sent? Or just the “toothed” part?

    Non riesco a ricaricarli, nel loro contenitore di ricarica, c’è per caso un accensione da premere?
    Lo spinotto di ricarica si invia completamente? O solo la parte “dentata”?

  7. Where is the power switch of the charging box located?

    Dove si trova l’interruttore di accensione della scatolina di ricarica?

  8. Today I unpacked new headphones. It looks like they cannot be charged, no lamps are on, even after 12 hours of charging. What now?
    Dziś rozpakowałem nowe słuchawki. Wygląda na to, że nie można ich naładować, nie palą się żadne lampki, nawet po 12 godzinach ładowania. Co teraz?

  9. hello a question for a hearing aid when I put in the box it turns red and the other blue
    hola una pregunta por un audífono cuando pongo en la caja se pone rojo i el otro azul

  10. What’s the use? nobody answers.
    why don’t you have a manual with normal instructions?
    O que adianta? ninguém responde.
    porque nao tem um manual com instruções normais?

  11. my right inpods turns white while charging and don’t turn on when I take it out… what is the problem and how do I fix it

  12. So I have had my I pods for weeks now and they are good up until now. And I just ran into a problem. So my charging case will charge, but the headphones themselves will not. It won’t flash when I take them out it just stay red what did I do?

  13. How do I get off the last call, it leaves sensitive when I put a button in my ear
    Miten saan pois viimeinen puhelu, se lähtee herkäst kun laitan napin korvaani

  14. They don’t connect at all, they connect and in seconds they disconnect, it’s crazy because I can’t hear anything. Very bad quality.
    No se conectan de ninguna, se conectan y a los segundos se desconectan es una locura por que no logro escuchar nada. Muy mala calidad.

  15. I can’t get them to pair with each other, when I search I see two I12 divices one for the left bud and one for the right? Is there something I can do? Please help

  16. Hi, the earphones themselves are having problems to connect with each other, I have tried to do what the little instruction book says about failed connection but they still don’t want to connect, can anybody please assist me on how to fix this?

  17. Hi, I am having trouble to get the earphones to connect with each other, they have no problem connecting with my phone seperately, I have done what the little manual book in the box said about fail connection but they still do not want to connect with each other, can someone please assist me?

Leave a comment

Your email address will not be published. Required fields are marked *