INVICTA ITECH-005 Unisex Default I-Tech Watch User Manual

NVICTA ITECH-005 Unisex Default I-Tech Watch

SPECIFICATION

• Product Name INVICTA I-TECH
• Display 1.48″ HD AMOLED /1000nits/24-bit color
• Resolution 480 × 480
• Battery Capacity 530 mAh
• Wireless Connection Bluetooth 5.3
• Water resistance garde 5ATM
• Satellite positioning Support dual-band GPS
• Geomagnetic sensor Support compass
• Barometer sensor Supports altitude/barometer
• Ambient light sensor (ALS)
• Supports auto-brightness Body
• Dimension 47.65mm x 47.65mm x 14mm
• Working Temperature 0°C – 50°C
• Compatible Operating Systems iOS 13.0 and above, Android 9.0 and above

Your INVICTA I-TECH

Getting Started
Follow these steps to set up and start using your INVICTA I-TECH. These steps will take approximately 5 to 10 minutes. Please ensure you have enough time to complete the setup process.

1. Wear the watch about two finger-widths above your wrist bone.
2. Adjust the band so there’s space for one finger between the strap and your wrist for comfort and accuracy.
3. Press and hold the Digital Crown until the startup screen appears.

Note: If the watch doesn’t turn on, the battery may be fully drained due to inactivity. Charge it for about 10 minutes and it should power on automatically.

Wear Your Watch Step 1: Download the Cubitt Pro app. Go to the app store on your phone, search for Cubitt Pro, and install it. For Android phones, go to the Google Play. For iPhone, go to the App Store. You can also scan the QR code on the left to quickly go to the ” Cubitt Pro app in the app store, and install it.

Step 2: Pair with the App Open the Cubitt Pro app and select “Set Up a Device” on the home page. Follow the instructions to pair your ‘ ‘ INVICTA I-Tech Bluetooth. Then you can start using the watch.

Attentions:

1. To prevent connection issues between the app and the watch, please do not pair directly within the Bluetooth device list in your phone’s system settings
2. To ensure successful pairing, please grant Cubitt Pro App permissions to access Bluetooth, Location, and Camera on your phone.

 Get Started Touchscreen

Operation Support full-screen touch (swipe, tap, touch and hold)

Crown and Button Press

1. Press the digital crown to wake up the screen.
2. Press the digital crown to enter the app center from the watch face screen.
3. Exit an app.

Rotate

1. Scroll through interface views
2. Adjust settings such as volume and screen brightness.

Press the action button

1. Press to start workout.
2. Long press to activate sos. Press the back button Press to return to the prevlous screen.

Smart Features

A1 Voice Assistant Swipe left on the page, tap the A1 button, and try to start a conversation with it. Press the action button for 1 second to instantly activate the A1 Voice Assistant. Set alarms & schedule events Check weather & health data Make calls & open apps More…

Routes Sync routes via Cubitt Pro for offline route navigation. Tap the Route, or select a route in the settings of running or other outdoor workout modes to enable.

Offline Music Playback Sync music to your watch via Cubitt Pro; This device supports playing offline music via Bluetooth headphones or its built-in speaker.

Workouts Browse and select your favorite workouts from the training library. Create Workouts in the Cubitt Pro, sync to your watch to start training. • 20-Minutes Fit Run • 25-Minutes Beginner Run/Walk Classic HIIT

System Functions

• Notification Center Swipe down on the watch face screen.
• Control Center To access the Control Center, swipe up on the watch face screen. Enable features like Silent Mode, Sleep Mode, Always-on Display, and adjust brightness and volume swiftly.
• Tiles To switch quickly between the Activity, Heart Rate, Sleep, Weather, or Workout tiles, swipe left or right on the watch face screen.
• Scheduled Change the Watch Face To change the watch face, press and hold the screen for 1 second to access the watch face gallery. Record Workouts To start your workout recording, access the Workout app and select a specific workout. For outdoor workouts, wait in an open area until the GPS connects.
• The blinking icon ” it’s acquiring a location fix and will stop blinking upon success.
• Health Metrics Measurement When wearing the watch, it automatically measures health data such as heart rate, sleep, stress, and activity. You can also view and track this data in the application.

Install New Watch Faces

In the Cubitt Pro app, navigate to the Face Gallery page to pick up your preferred watch face.

To charge the watch

• connect the charging cable to a USB power source. Attach the other end to the charging contact on the back of the watch.
• The watch will display a charging icon while it is being charged. 000 00
• Note: Make sure the USB charging plug is at the same side as the crown. Ensure to use a standard USB power source with an output of 5V=IA or above. Prior to charging, ensure to clean the charging contacts of the watch to eliminate any lingering sweat or moisture.

Charge the Watch Remove band

1. Lift the spring bar from the groove.
2. Push and hold the spring bar.
3. Pull it out gently to remove the band.

Install band

1. Insert the metal pin at position “A” in the hole.
2. Push and hold the spring bar.
3. Press the band into the body and release the spring bar.
4. Pull the watch band to confirm the firm installation.

Wear and Care

• It is advised to remove the watch for approximately one hour daily. If you experience discomfort or irritation like redness, tingling, or a burning sensation, take off the watch and rest your wrist. O To maintain hygiene, regularly clean your watch and wrist, particularly after workouts and sweating. Avoid using hand soap, shower gel, dishwashing liquid, or cleaning wipes as they can cause skin irritation. Instead, use mild soap and fresh water to clean the band.
• Designed for Maximum Comfort The inner sweat grooves of the band are specifically designed to minimize skin irritation resulting from sweat, moisture, and prolonged wear.

Precautions

• Do not replace the built-in battery yourself as it may pose a safety risk
• Avoid forcibly opening the watch case, as it may cause short circuits and overheating.
• Keep the watch away from environments exceeding 600C to prevent battery leakage or explosion. While the product complies with 5ATM waterproof standards, it is not recommended for activities such as bathing, diving, or water skiing that involve high temperatures, steam, or rapid water flow.
• Note that the waterproof performance may be compromised if the product structure is damaged. • Be aware that firmware upgrades can lead to interface and usage changes.
• For detailed information, please refer to the product’s upgrade instructions.

FCC STATEMENT

FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.