Yaber T2 Projector User Manual

1. YABER Lifetime Professional Support

Dear Valued Customer,

Thank you for choosing the Yaber T2 projector. This manual will help you navigate through all its features.

We understand that questions and concerns may arise during use. Many common problems, such as inability to auto focus or keystone, sound issues, or WiFi/Bluetooth connection issues, can usually be resolved with appropriate settings adjustments. If you encounter any issues, feel free to send your order number and the problems to us at service@yaber.com. Our service team will offer a solution within 24 hours.

Your satisfaction is our top priority. If you encounter any issues, we sincerely hope you can give us an opportunity to make things right. We wish you an outstanding experience with the T2 projector.

Yaber Consumer Service Team

2. WARRANTY

Thank you for your purchase and support. Yaber provides a 3-year warranty for the Yaber T2 projector. If you have any questions, please feel free to contact us. For T2 Projector inquiries: service@yaber.com.

3. Important Precautions

Please use the device correctly:

• Do not face the lens into eyes, as the strong projector light may cause injury.
• Do not block the air inlet/outlet of the device to avoid damage to internal electronic devices from heat dissipation failure.
• Do not wipe the lens directly with cleaning tools like paper or cloth, as this can damage the lens. Clean dust on the lens using clean air blowing.
• Do not wash the device with chemicals, detergents, or any liquid to prevent the circuit board from being corroded by moisture.
• Keep the device and its components and accessories out of reach of children.
• Make sure the device is used in a dry and ventilated environment.
• Do not store the device in excessively hot or cold places, as extreme temperatures will shorten the life of electronic devices. Place and use the device in an environment of 0°C-40°C.
• Do not put the device into any heating equipment (such as a dryer or microwave oven) for drying.
• Do not firmly extrude the device or place barriers on it or its back to avoid damage.
• Do not throw, strike, or sharply vibrate the device to avoid damage to the internal circuit board.
• Do not attempt to disassemble and assemble the device yourself. If any issue occurs, please contact Yaber's after-sales service.

4. What's Included

The package typically includes:

• Projector: The main Yaber T2 projector unit.
• Remote Control (For T2): A remote control for operating the projector.
• Lens Cover: A protective cover for the projector lens.
• QSG & FAQ: Quick Start Guide and Frequently Asked Questions booklet.
• HDMI Cable: A cable for connecting external devices via HDMI.
• Power Cord: A cord for supplying power to the projector.
• Cleaning Cloth: A cloth for cleaning the projector or lens.
• Brand Card: A card indicating the product brand.
• AAA Batteries: Batteries required for the remote control.

If you don't have batteries for the remote control, please contact service@yaber.com.

4.1 Projector Interface

Notice: Press the power button for 2-5 seconds to boot the projector.

Notice: Please ensure that the area in front of the [Focus receiver] is not blocked, otherwise the focus function will be affected.

4.2 Remote Control

The remote control features the following buttons:

• Power On/Off: Turns the projector on or off.
• OK: Confirms selections.
• Back/Exit: Returns to the previous screen or exits a menu.
• Home Page: Navigates to the projector's home screen.
• Volume +/-: Adjusts the audio volume.
• Menu: Accesses the projector's menu options.
• Arrow Keys: Navigates through menus and options.
• Auto Focus: Activates the automatic focus adjustment.
• Focus +/-: Manually adjusts the focus.

5. Specification

Model No. T2

6. About Battery

The Yaber T2 is equipped with a battery providing 2.5 hours of use in battery mode (at 60% brightness). In battery mode, the screen brightness is reduced to extend battery life. You can adjust settings to increase brightness, but this will shorten the duration.

Tips: As the number of times the machine is used increases, the battery life may be affected.

Brightness Setting control allows adjustment of screen brightness.

6.1 Charging Time

Tips: For the health of the battery and your experience, we recommend charging the machine while it is turned off.

Tips: For first-time use, we recommend fully charging the projector using the provided power cord.

When the Power light is Blue, the battery is completely charged. When the Power light is Red, the battery is charging.

Low Power Notification: When the battery power is lower than 20%, a window will pop up to prompt you to charge the projector, and the battery icon on the screen will change. If the battery is about to run out, a shutdown countdown pop-up will appear.

7. Installation

7.1 Handle to Stand

For a better image, place the projector on a stable, flat surface. If you need to adjust the screen at a larger angle, rotate the carrying handle to the bottom; it provides support at certain angles (up to 15%).

Notice: Please ensure that the area in front of the focus receiver is not blocked, otherwise the focus function will be affected.

7.2 Ceiling Mounting

Note: T2 does not support four-corner mount installation.

Step 1: Make sure you have a universal mounting bracket that fits the projector.

Step 2: Use the M5*5mm screw to fix the projector onto the bracket to complete the installation.

[Diagram showing projector mounting holes and a bracket]

7.3 Stand Mounting

Note: T2 does not support four-corner mount installation.

Step 1: Make sure you have a universal mounting bracket that fits the projector.

Step 2: Use the M5*5mm screw to fix the projector onto the bracket to complete the installation.

[Diagram showing projector mounting holes and a bracket]

8. Projection Settings

You can select [Settings] > [Image Settings] or [Projection Settings] to adjust the projector image.

[Visual representation of UI options: Projection Mode, Auto Keystone, Manual Keystone, Projection Zoom, Keystone Correction]

8.1 Projection Distance

[Diagram illustrating projection distances for different screen sizes: 120" at 3.31m/10.89ft, 80" at 2.21m/7.26ft, 60" at 1.66m/5.45ft, 40" at 1.11m/3.63ft]

Tip: The recommended screen size is 80 inches.

Tips: Actual projection size and distance may deviate slightly from laboratory data.

[Diagram of projector with a scale indicating projection distance]

8.2 Auto Focus

Auto focus will be activated after each shift. You can also turn off the auto focus function through [Settings] > [Projection Settings] > [Auto Focus].

[Visual representation of UI options: Projection Mode, Auto Keystone, Manual Keystone, Auto Focus, Keystone Correction]

Attention: If you have already determined the location of the projector, it is recommended that you turn off autofocus in the settings to get a better viewing experience.

8.3 Auto Keystone Correction

As you move the machine, the T2 automatically performs trapezoidal correction based on the target wall.

Attention: The angle of the auto keystone cannot exceed 15 degrees up, down, left, and right.

8.4 Auto Screen Alignment and Auto Obstacle Avoidance

Note: When using the Auto Screen Alignment and/or Auto Obstacle Avoidance functions, make sure the Auto Keystone and Auto Focus functions are turned on.

1. Obstacle avoidance may not work when there are white or other light-colored objects in the target screen.
2. The backdrop should have a distinct black or other colored border, except for anti-light screens which do not require a border.
3. Before using the auto screen alignment function: Please ensure the projection screen is larger than the screen area, and do not block the area within the central square frame of the screen.

[Diagrams illustrating screen alignment and obstacle avoidance scenarios]

8.5 Electric Focus

You can also adjust the focus by clicking the buttons on the remote control to get your desired picture.

[Visual representation of Auto Focus and Manual Focus icons on the remote]

8.6 Manual Keystone Correction

If you need to adjust the screen further, you can adjust it by dragging the arrows after selecting "Manual Keystone" in the settings.

[Visual representation of UI options: Projection Mode, Auto Keystone, Manual Keystone, Auto Focus, Keystone Correction]

8.7 Projection Zoom

After auto-focusing, the zoom effect will be reset. If you want to save the zoom, please try to turn off the auto focus when the picture is clear.

[Visual representation of UI options: Auto Keystone, Manual Keystone, Auto Focus, Manual Focus, Zoom Screen]

9. Picture Settings

You can select [Image Settings] or [Projection Settings] in [Settings] to adjust the projector image.

[Visual representation of UI options: Image Mode, Color Temperature, HDMI External Spee..., Brightness Setting]

9.1 Brightness Settings

You can also adjust the brightness by adjusting the settings; however, battery life will change as well.

[Visual representation of Brightness Setting and Image Quality controls]

9.2 Image Color Settings

Adjust the image color through [Home] > [Settings] > [Image Quality] > [Picture Mode]. You can set the [Brightness], [Contrast], [Sharpness], [Color] of the screen in this [User Mode].

Attention: The image color setting will only take effect when playing pictures or videos.

10. Connectivity

10.1 HDMI, USB, Lan Port

The T2 has an HDMI 1.4 port and a USB 2.0 port. Before using these ports, ensure your external devices are compatible with this format.

[Diagram showing projector ports: Lan Port (RJ45), Audio Out, HDMI, USB, Reset, Power Light, IR, Air Outlet]

10.1.1 USB

Notice: T2 currently only supports reading FAT32 and NTFS USB flash drives, and does not support reading exFAT formatted USB flash drives.

10.1.2 HDMI

If you encounter troubles while using HDMI, try these solutions:

• Method 1: Switch HDMI EDID version to 1.4 in your external device settings.
• Method 2: Try changing the HDMI cable.
• Method 3: Try replacing other external devices with HDMI function and check if the HDMI interface of the external device is working.

[Diagram showing a typical HDMI connection setup: Source device (e.g., DVD player) connected via HDMI cable to the projector]

10.1.3 Lan

The Lan interface of T2 is an RJ45 interface. If you encounter lag when using screen mirroring with your phone, try using this interface to connect to the network and use screen mirroring.

10.2 Wireless Connections

Wi-Fi Screen Mirroring

Notice: If you need to mirror Netflix, Prime Video, etc., to the projector, please connect a TV Dongle/Stick or other products with these streaming media via HDMI.

10.3 Yaber App

You can download the Yaber App from the Google Play Store or Apple App Store for better screen casting!

Notice: Scan the QR code to download the Yaber App.

[Placeholder for QR code image - this will be excluded from the final output]

10.3.1 Screen Share

Tip: To enhance your experience during screen sharing, download the [Yaber] app from the Apple App Store or Google Play Store.

1. Ensure your phone and the projector are connected to the same Wi-Fi network.
2. In the Yaber app, tap [Connect Device] and select the device named [Yaber_T2_xxxx] to connect.
3. Once connected, select the screen mirroring option in the Yaber app to share your phone screen with the projector.
4. To end the screen share, go to your phone's control center, select the device, and stop sharing.

Attention: If you need to share the screen from streaming apps like Netflix, Disney, or Prime Video, enter the Dongle system to share.

Tip: If you prefer not to use the Yaber APP, please follow these steps (only step 2 is different):

1. Ensure your phone and the projector are connected to the same Wi-Fi network.
2. In the screen mirroring settings on your smartphone, select the device named [Yaber_T2_xxxx] to connect.
3. To end the screen share, go to your phone's control center, select the device, and stop sharing.

10.4 Phone Control

Attention: Yaber App cannot control TV Dongle.

Attention: The phone and projector need to be connected in the same Wi-Fi environment.

The [remote control] function of the Yaber App can help you control the projector without a physical remote control.

10.5 NFC Settings

Tip: If you need to use NFC for screen mirroring, download the [Yaber] app from the Apple App Store or Google Play Store to synchronize your screen.

1. When using NFC, ensure your phone and the projector are connected to the same Wi-Fi network.
2. Use an NFC-enabled phone and lightly tap the NFC area on top of the device to use this feature.

Attention: Ensure NFC is turned on in your phone's settings.

[Diagram showing a hand holding a phone with an NFC symbol tapping a projector]

11. T2 Dongle (Special for T2 Plus or Purchase Separately Online)

If you want to use and browse streaming content such as Netflix, YouTube, Prime Video, please contact the support team at service@yaber.com to purchase the corresponding Dongle.

11.1 Dongle Overview

[Diagram showing TV Dongle with HDMI Output and Power In, an Adapter (Power in + Video Source) with HDMI Output and HDMI Input, and a Remote Control]

Attention: When using Google TV for the first time, follow the screen prompts for remote control pairing and other settings.

To pair the remote, hold down the pairing button [left arrow symbol] and [OK button symbol].

Dongle Installation

Notice: When using the Dongle on the T2/T2 Plus, it must be connected via the Yaber Adapter. The Yaber adapter combines power and video source functions.

Step 1: Connect the dongle with the adapter.

Step 2: Connect the adapter with the HDMI port of the projector.

[Diagram showing Step 1: Dongle connecting to Adapter, and Step 2: Adapter connecting to Projector's HDMI port, with checkmark and cross symbols indicating correct/incorrect connection]

How to Use TV Dongle

After connecting the TV Dongle to the HDMI Port on T2, click [HDMI] on the Homepage to enter the TV interface.

Notice: When you turn on the device, it will take about 30 seconds to wait before the Dongle screen appears.

[Diagram showing projector with HDMI port and a selection screen with an HDMI option]

12. Bluetooth Settings

You can connect your phone to the projector via Bluetooth and enter Bluetooth speaker mode anytime after confirmation. Please pair the device named [Yaber_T2series_xxxx].

[Visual representation of Bluetooth connection status showing "Yaber_T2series_xxxx"]

In Bluetooth Speaker mode, you can also turn off the screen and use the T2 as an outdoor stereo.

[Visual representation of playback controls: Rewind, Play, Fast Forward, Power/Sleep icon]

13. System Upgrade

Tips: You can check the system status of your device in [Settings] > [About] > [Upgrade].

If you need to upgrade the software, please go to [Settings] > [About] > [System information], select the corresponding [MAC address], and send it to the support team at service@yaber.com.

[Visual representation of System Information menu with options like About, System Information, Upgrade, Factory Reset]

14. Quiet Mode

Notice: After turning on Quiet Mode, the noise of the machine will slowly decrease within 5 minutes.

You can turn on Quiet Mode from the main page. This mode provides a quieter and more subdued picture by reducing brightness and fan speed.

[Visual representation of the Yaber interface with a "Quiet Mode" button]