User Manual for KENT models including: 16129, EMERALD, Induction Cooktop, 16129 EMERALD Induction Cooktop, Cooktop, EMERALD Induction Cooktop
7 days ago — Please restart (OFF/ON) the unit once. If the error still exists, please contact the qualified service centre. E2. The Heat sensor of radiator (IGBT).
TROUBLE CODE E1 E2 E3 POSSIBLE REASONS SOLUTION Plate surface tamperature sensor is not connected well, or shortcircuited. The Heat sensor of radiator (IGBT) is not connected well, or shortcircuited. Please restart (OFF/ON) the unit once. If the error still exists, please contact the qualified service centre. Please restart (OFF/ON) the unit once. If the error still exists, please contact the qualified service centre. Supply voltage is too high(more than Check power supply. Power on after 275V). power supply is back to normal. E4 Supply voltage is too low(less than Check power supply. Power on after 85V). power supply is back to normal. E5 The temperature of plate surface is Please wait for few minutes until the too high. unit cools down. E7 Coil loose connection Please contact the qualified service centre. E8 There is no pot/pan or unsuitable Change the suitable pot/pan, or con- pot/pan on induction cooker. tact the qualified service centre.Adobe PDF library 17.00 Adobe Illustrator 27.1 (Macintosh)