Specializes in portable refrigeration solutions, including 12V/24V fridges, freezers, and ice makers designed for camping, caravans, and outdoor adventures.
Bras Monkey is a leading provider of portable cooling solutions designed for the great outdoors. Whether you are exploring in a 4WD, camping off-grid, or traveling in a caravan, Brass Monkey offers a range of sturdy & efficient refrigeration products to keep your food fresh and drinks cold.
Their lineup includes versatile Portable Fridge/Freezers ranging from compact console models to large capacity dual-zone units, as well as portable Ice Makers. Engineered for mobile use, these appliances typically run on 12V/24V DC systems and offer features such as app connectivity, solar-charging compatibility (via battery), and multi-stage parastina pîlê.
Pirtûkên rêberî yên herî dawî ji manuals+ ji bo vê marqeyê hatîye amadekirin.
Pirsên gelemperî di derbarê rêbernameyan, qeydkirin û piştgiriya vê marqeyê de.
The F1 code indicates low voltage to the fridge. This often happens if the battery protection is set to 'High' while using a battery that is not fully charged. Try adjusting the battery protection setting to Medium or Low.
On most models, while the fridge is running, long-press the 'Settings' or gear button for about 3 seconds until the protection letter (H, M, or L) flashes. Then press the button again to cycle through High, Medium, and Low settings.
No, you should not connect a solar panel directly to the fridge unless the specific model has a dedicated solar input and controller. Typically, the solar panel should charge a battery, and the fridge should be powered by that battery.
A flashing red light on the ice maker usually indicates a fault. For example, one flash every 5 seconds may indicate low voltage, while two flashes may indicate the condenser fan is overloaded. Refer to your specific user manual's troubleshooting section for exact flash codes.
Brass Monkey fridges are designed for 12V/24V DC input (vehicle or battery power). They can also run on mains AC power using a compatible AC-to-DC power adapter suitable for the model.