KRAMER KWC-MUSB Receiver for Micro-USB Connector
Installation Instructions
MODELS:
- KWC-MUSB Receiver for Micro-USB Connector
- KWC-LTN Receiver for Lightning Connector
SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to these installation instructions may be found.
We welcome your questions, comments, and feedback.
www.kramerAV.com
info@kramerel.com
KWC-MUSB Receiver for Micro-USB Connector and KWC-LTN Receiver for Lightning Connector
Congratulations on purchasing your Kramer KWC-MUSB and KWC-LTN wireless charging receivers. You can use the receivers with the Kramer Wireless Charging (KWC) products.
NOTE: These receivers are used for mobile devices that DO NOT have a built-in wireless charging receiver.
Mobile devices with a built-in wireless receiver, compliant with the Qi standard, can be placed directly on the charging spot.
Using the Wireless Charger
To use the Kramer receivers:
- Connect your mobile device to either the KWC-MUSB Receiver for Micro-USB Connector or the KWC-LTN Receiver for Lightning Connector, as required.
- Place the mobile device with the attached receiver centered on the charging spot (correct side facing the charging spot, see Figure 3) until it’s fully charged.
WARNING:
- You can only charge one mobile device via the charging spot at a time.
- When charging a mobile device, do not place any metal or magnetic objects over the receiver.
- Charging a mobile device using the receiver in the vicinity of pacemakers, hearing aids, or similar medical electronic devices may interfere with the function of these devices.
- Make sure the receivers are used in a cool and well-ventilated environment and away from flammable and explosive objects.
- Avoid using the receivers in extreme temperatures or high humidity.
Specifications
| PORT: | KWC-MUSB: micro USB receiver KWC-LTN: lightning receiver |
| LED INDICATORS: | ON (blue) |
| CHARGING EFFICIENCY: | 70% |
| CHARGING POWER: | 5V DC, 700 mA Max |
| STANDARD: | Qi |
| SAFETY REGULATORY COMPLIANCE: | CE, FCC |
| OPERATING TEMPERATURE: | 0° to +40°C (32° to 104°F) |
| STORAGE TEMPERATURE: | -40° to +70°C (-40° to 158°F) |
| HUMIDITY: | 10% to 90%, RHL non-condensing |
| DIMENSIONS: | 3.7cm x 5cm x 0.85cm (17.2” x 7.2” x 1.7”) W, D, H |
| WEIGHT: | Net: 0.012kg (0.03lb) Gross: 0.032kg (0.07lb) |
| COLORS: | KWC-MUSB: light blue
KWC-LTN: light green |
| Specifications are subject to change without notice at www.kramerav.com | |
WARRANTY
Documents / Resources
 |
KRAMER KWC-MUSB Receiver for Micro-USB Connector [pdf] Instruction Manual KWC-MUSB, KWC-LTN, Receiver for Micro-USB Connector |
