KOHLER K-2006 Kingston Wall Mount Bathroom Sink
Features
- Made from premium materials that withstand high-volume usage.
- 21-1/4″ (540 mm) x 18-1/8″ (460 mm).
- Faucet sold separately.
- Includes wall hanger.
Material
- Vitreous china.
Installation
- Wall-mount.
- Drilled for concealed arm carrier installation.
Recommended Products/Accessories
- K-8998 P-Trap
- K-23726 Drain treatment
- K-23725 Cast iron cleaner
Included Components
- Additional Components: Hanger(s)
Codes/Standards
- ASME A112.19.2/CSA B45.1
- ADA
- ICC/ANSI A117.1
- CSA B651
- OBC
Available Colors/Finishes
Color tiles intended for reference only.
DIMENSION
Technical Information
All product dimensions are nominal.
- Bowl configuration: Single
- Installation: Wall-mount
- Center(s): 8
- Bowl area (Center):
- Length: 16″ (406 mm)
- Width: 10″ (254 mm)
- With overflow: Yes
- Water depth: 3-1/8″ (79 mm)
- With overflow: Yes
- Number of deck holes: 3
- Faucet hole spacing: 8″ (203 mm)
- Faucet hole(s): 1-3/8″ (35 mm)
- Soap/Lotion hole: 1-1/4″ (32 mm)
- Drain hole: 1-3/4″ (44 mm)
Notes
Install this product according to the installation instructions. ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.
KOHLER® One-Year Limited Warranty
See the website for detailed warranty information.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com.
Documents / Resources
![]() |
KOHLER K-2006 Kingston Wall Mount Bathroom Sink [pdf] Instruction Manual K-2006 Kingston Wall Mount Bathroom Sink, K-2006, Kingston Wall Mount Bathroom Sink, Mount Bathroom Sink, Bathroom Sink |