kogan NBOTLTSLP2A Solar Powered Motion Sensor 2 in 1 Portable LED Light User Manual
SAFETY & WARNINGS
- Read these instructions thoroughly before use.
- Please note, the solar light is designed to work when the lighting gets dark. The selected location should not be near a light source such as a porch light or streetlight, as these might keep the solar lights from automatically turning on.
- Although the battery has been charged by the manufacturer, the charge may have dropped by the time the consumer receives the product. Please let the solar light charge for a full day for the maximum performance.
- The surface of the solar panel must be kept clean. Dusty surfaces will reduce charging efficiency.
- Some components of this product are not replaceable. If the part is damaged, the whole product must be disposed of. Do not disassemble and attempt to repair.
- Keep away from fire.
- Always keep the solar panel facing upwards.
- Do not immerse in water or other liquids.
- Ensure the chosen location of the light receives plenty of sunlight or it may require a longer charging time.
- Do not use the light in the temperatures above 45°C or below 0°C. Doing so may affect battery life and normal use.
OVERVIEW
- Solar panel
- Indicator
- Power button
- LED panel
- Motion sensor
INSTALLATION
Step 1:
- Select a suitable location that receives a lot of sunlight to ensure the solar panel can charge the built-in Li-ion battery effectively.
- Remove the LED panel
Step 2:
- Using the appropriate mounting hardware for your surface and x2 screws 28mm vertically apart, mount the solar panel.
- Replace the LED panel.
OPERATION
Press and hold the Power button to turn the light on and off.
Wall Light Mode:
Press the power button to cycle through the lighting modes.
- Mode 1 (Red): 50lm with motion sensor
- Mode 2 (Green): no lighting, motion sensor off
- Mode 3 (Orange): 200lm with 6 Hour timer
Portable Mode:
Press the power button to cycle through the lighting modes.
- Mode 1: 100lm
- Mode 2: 200lm
Battery capacity indicator:
- Green: >70%
- Orange: 30%-70%
- Red: <30%
SPECIFICATIONS
Solar panel
Monocrystalline
Battery
Li-ion battery
Material
Polycarbonate
Working temperature
0°C – 45°C
Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
Documents / Resources
 | kogan NBOTLTSLP2A Solar Powered Motion Sensor 2 in 1 Portable LED Light [pdf] User Manual NBOTLTSLP2A, Solar Powered Motion Sensor 2 in 1 Portable LED Light, 2 in 1 Portable LED Light, Solar Powered Motion Sensor Light |
