User Guide for shopify models including: DC Accessory Relay System Wiring Cable, Relay System Wiring Cable, Wiring Cable
User Guides & Manuals– Siren Marine 3 Pro System Wiring Cable 1 Wiring Cable 2 NMEA Connection Micro ePIR Motion Sensor Infrared Motion Sensor Magnetic Reed Switch Canvas Snap Sensor Shore Power Plug 120V Shore Power Relay 240V Shore Power Relay
User Guides & Manuals– Siren Marine
DC Relay Text Wiring Cable 1 Battery 1 (+) Relay Control 2 Relay Control 1 +9VDC to +30VDC Power DC Common Ground (-) Note: The DC Relay can be connected to either Relay Control 1 (purple) or Relay Control 2 (white) on the wiring cable. DC Accessory such as lighting, or audible alarm/siren Note: Posi-Tap? connectors, terminal block, or other connection type can be used to connect the wiring cable to sensor wires. Installation Instructions: +12VDC Power +12VDC Power 1. Connect black relay wire to Relay Control 1 (purple) or Relay Control 2 (white) on the wiring cable. 2. Connect orange relay wire to accessory. 3. Connect blue relay wire to +12VDC power. 4. Connect red relay wire to +12VDC power. Note: The red and black wires connect to the coil side of the relay. The blue and orange wires connect to the switch side of the relay. This relay is required if the draw on the Siren 3 Series output exceeds 1 Amp. This relay can draw up to 10 Amps. Product SKU: SM-ACC-DCRE DC Accessory Relay DC Common Ground (-)mike