Docs | 2E
Universal wireless screen mirroring solution - EZCastGuides to using Miracast with EZCast
User Guide for 2E models including: PHOBOS Built In Projector 200 lm, PHOBOS, Built In Projector 200 lm, In Projector 200 lm, Projector 200 lm
File Info : application/pdf, 45 Pages, 452.16KB
DocumentDocument2E PROJECTOR PHOBOS / DEIMOS POWERED BY EZCAST Quick Start Guide
2 / EZCAST
2 / EZCAST
EN UA RU
This 2E projector Quick Start Guide provides a guideline for basic operation. Please read the guide thoroughly before operating the projector. Visit www.2E.ua for additional information. Product information is subject to change without prior notice. . .
Thank you for purchasing the 2E projector powered by EZCAST. Our product combines the easy to use interface, portability, and cross platform compatibility, to let you enjoy projecting media from Android, iOS phones and tablets, as well as Windows and MacOS laptops, anytime, anywhere.
EZCast app installation
Please visit www.EZCast.com/app to download EZCast app for every supported platform. Mobile devices can proceed to the relevant download area by scanning the QR code below. (iOS users can search for EZCast in the App Store to download the app) (Android users can search for EZCast in Google Play to download the app)
2
EN
Precautions
How to use the projector
1. Do not turn the lens toward human eyes when in operation, to avoid damaging the eyes caused by the high intensity light source.
2. Do not block the device ventilation to avoid damage to the internal electronic devices due to overheating.
3. Do not use chemicals, cleaning agents or clean water to clean the device, and prevent rain water, moisture and mineral-containing liquids from corroding circuit boards.
4. Please keep the device and its parts and accessories out of reach of children.
5. Please ensure that the device is operated in a dry and ventilated environment.
6. Do not store the device in extreme hot or cold conditions. High and low temperatures may shorten the lifespan of electronic devices. The normal operating environment is between 5°C~30°C.
7. Do not put the device into any drying equipment (such as dryer, microwave oven, etc.).
8. Do not squeeze or place heavy objects over the device to avoid damage to the device.
9. Do not throw, knock or shake the device violently, which may damage the internal circuit boards.
10. Do not attempt to disassemble the device without permission. If there is any problem, please contact customer support.
11. It is recommanded to shut down for 30 minutes after playing for more than 8 hours.
Never look directly into the projector lens when the lamp is turned on.The bright light can damage your eyes.Never let children look into the lens when it is on.
EN
3
2E projector body and remote
DC Mobile Stand Focus Ring Lens
Power
Home Arrows
Volume down
Speaker mode
Select Back Volume up
Settings
Control Panel
Wireless Kit USB
HDMI Headset Jack Micro SD USB-C (Only for Phobos) Remote Sensor Ventilation (Do not block)
Home
Power
Select Arrows
Back
Settings
4
EN
How to set up 2E projector projector
DC HDMI
Wireless Adapter
Ventilation (Do not block)
Preparation
1. Plug the power to the projector, and the power button will light up. 2. Insert the wireless adapter into the wireless kit port of the projector. 3. To turn on projector, hold the power button of the projector for 3 seconds
till you hear the «beep" sound and the light will turn blue. 4. Adjust focus ring until the projection image is clear and focused.
Projector stand and holders
1. Normal mode: When projecting forward, adjust elevation angel by loosening the projector stand under the projector. When projecting upward, use the holders to avoid blockage of ventilation.
2. Portrait mode: Equip the projector holders at the bottom to make sure the ventilation works well.
(Normal mode)
Project forward
(Normal mode)
Project forward
Portrait mode
Projector stand EN
Ventilation (Do not block)
Holders
Ventilation (Do not block)
5
First time settings
1. Select the start-up language. 2. Wi-Fi setting: connect the projector to your router and enter the
password. (Important) 3. After starting up, enter the main menu and select the functions by
arrow keys on the projector or remote control: Android, iOS, MacOS, Windows, bluetooth, EZCast, Multimedia, HDMI, Type C (only for Phobos model), and Setting, as below shown:
2E projector
Power off:
1. Sleeping mode: press the power button and hear the "beep" sound with the power button still blue.
2. Power off: hold the power button for 3 seconds till you hear the «beep" sound twice, and the power button turns red.
Multimedia playback
1. Insert a USB flash drive into USB1 port or insert SD Card to SD Card slot on the projector.
2. Select the «Multimedia»>>»USB Disk» or «SD card»>>»Video», «Music» or «Photo» to enter the file folder.
3. Select the file to play with the up and down arrow keys, and press «OK» to confirm.
4. When playing media, press «OK» to see the menu, and select item by the left and right keys.
5. Support format: video, audio, and image.
6
EN
Settings
Select the «Setting» key on the projector or remote control, and press «OK» to confirm. 1. Wi-Fi setting : Select the «Wi-Fi setting» menu and enter the Wi-Fi
setting interface, select the «Internet», press «OK» key to confirm, and select the router from AP list and enter the password.
2. Display mode: Swtich standard/ bright mode. 3. Portrait mode: Switch on to project vertically. Please make
sure NOT to block the ventilation. *Note: Auto mode is supported only for Phobos model. 4. V.Keystone: Manually vertical keystone adjustmentup to ±30 degrees (Auto adjustment for Phobos model). 5. H. Keystone: Manually adjust horizontal keystone up to ±10 degrees. 6. 4 Corner Correction: Choose the corner to be adjusted and use arrows to change the location. 7. Color Setting: Change brightness, Contrast, Saturation, Sharpness, R/G/B Gain, and R/G/B Offset. 8. Firmware Upgrade: Upgrade via USB drive or through internet. 9. Projector Location: Switch to Front/ Front Ceiling/ Rear/ Rear Ceiling. 10. Language: Change language with arrows. 11. Reset All: Choose yes to reset projector to factory default. All saved changes to Setting are lost. The projector will be restored to the factory settings, and the data adjusted by the user will not be saved.
EN
7
How to Plug and Play (via USB cable)
Android 1. Select Android on main menu of the projector, and then select Plug
and Play by pressing «OK» key. 2. Connect your mobile to the projector via mobile USB data cable. 3. Download and install MiraPlug app. 4. Replug the cable and it will start casting automatically.
iOS 1. Select the iOS on main menu of projector, and then select Plug and
Play menu by pressing «OK» key. 2. Connect your mobile to the projector via mobile USB data cable, and
then choose «Trust This Computer» to start your projection. Note: If there's a black screen after connecting to mobile, please reboot your mobile and then try again.
8
EN
Windows
1. Select Windows on main menu of projector, and then select Plug and
Play menu by pressing»OK» key.
2. Install EZCast app on your PC.
Please visit https://www.ezcast.com/app to download EZCast app.
3. Connect your PC to the projector via USB A-to-A cable.
4. Launch EZcast app on your PC and click icon.
5. Find and select «Beam-XXXX» from "Search device", and click
to
mirror.
MacOS
1. Select MacOS on main menu of projector, and then select Plug and Play
menu by pressing «OK» key.
2. Install EZCast app on your PC.
Please visit https://www.ezcast.com/app to download EZCast app.
3. Connect your PC to the projector via USB A-to-A cable.
4. Launch EZcast app on your PC and click icon.
5. Find and select «Beam-XXXX» from "Search device", and click
to
mirror.
UA
9
How to Wireless Display
Android
1. Select Android on main menu of projector, and then select Wireless menu by pressing «OK» key.
2. Select mirroring function in the setting of your phone and find"BeamXXXX" device shown on device list to start your mirroring.
Note 1: The naming of mirroring function varies different brands. Note 2: Compatibility: Android 5.0 or above.
iOS
1. Select iOS on main menu of projector, and then select Wireless menu by pressing «OK» key.
2. Make sure both of your projector and mobile are connected to the same WiFi router.
3. Go for Screen Mirroring of your mobile and select the "Beam-XXXX" shown on the list to start projection.
Note: Compatibility: iOS 12 or above.
10
EN
Windows 10
1. Select Windows on main menu of projector, and then select Wireless
menu by pressing «OK» key.
2. Make sure both of your projector and computer are connected to the
same Wi-Fi router.
3. Click quick key by
on the computer, and connect to the
device named by "Beam-XXXX" to start your projection.
Note: Please upgrade your windows 10's operation system to the lastest version.
MacOS
1. Select MacOS on main menu of projector, and then select Wireless menu by pressing «OK» key.
2. Make sure both of your projector and computer are connected to the same Wi-Fi router.
3. Click for Screen Mirroring icon on your computer and select the "BeamXXXX" shown on the list to start your projection.
EN
11
Google Home Screen Mirroring (Android Only)
1. Select Android on main menu of projector, and then select Google Home menu by pressing «OK» key
2. Make sure both of your projector and mobile are connected to the same WiFi router
3. Download and install Google Home app from Google Play Store. 4. Launch Google Home app and choose device name: Beam-xxxx > Cast
my screen > Cast screen
Bluetooth
Select "bluetooth" to use 2E projector as a bluetooth speaker.
Connection: Turn on bluetooth of your mobile or computer, and find Beam-XXXX to connect. The projection screen will turn black during connection.
Disconnection: Press "back" key on projector chassis/ remote control, or disconnect from the bluetooth list of your mobile or computer. The projection screen will turn on again after disconneted.
12
EN
EZCast
1. Select EZCast on main menu of projector and make sure both of your
projector and mobile are connected to the same Wi-Fi router.
2. Install EZCast app on your device. Please download the app from
application market for your mobiles or visit https://www.ezcast.com/
app to download EZCastapp for PC.
3. Launch EZCast app on your device, and then click
icon and select
the "Beam-XXXX" shown on the list to start your projection.
DLNA streaming
1. Select EZCast on main menu of projector and make sure both of your projector and mobile are connected to the same Wi-Fi router.
2. Launch the app that support DLNA, such as QIY, QQTV. 3. Click the DLNA icon on the video you'd like to play, and select "Beam-XXXX".
Note: DLNA icon usually shows in the corner of the video, and looks like a tv which depends on different apps.
EN
13
FAQ
Problems No electricity/can't power on
Unable to screen mirroring
Unable to play online media
Abnormal casting/ black screen
Unable to upgrade online
Cannot focus image Remote control not functional Unable to shut down
Solutions
1. Check whether the power cord is connected properly. 2. Press the Power button for 3 seconds till you hear the «beeping» sound, and then release the button and wait for the projector to start up.
1. Make sure wireless adapter has been installed to wireless kit port on the projector. 2. Refer to the Quick Guide to make sure you are using the correct screen mirroring function. 3. If the screen stutters or lags, the distance between source and projector is too far. 4. Make sure the phone is connected to the SSID of the projector.
1. Check whether the network connection is normal. 2. Check whether the wireless adapter is inserted into the Wireless kit port.
1. Make sure the ventilation works without blocked. 2. Long press the Power button to shut down. 3. Wait for the projector to cool down, and then press Power button to turn on again.
1. Check if the Wireless adapter is inserted into the Wireless kit port. 2. Check whether the network connection is normal. 3. Select OTA upgrade in the Setting. 4. Check whether there is a newer firmware version available to upgrade.
1. Confirm whether the projecting distance is appropriate, and try to extend the distance between projector and screen. 2. Check whether the lens is clean.
Replace the batteries of remote control.
Press the Power button for about 10 seconds to force the shut down.
14
EN
Warranty
1. The defective product is valid for refund and replacement if claimed with proof of purchase within 14 days of purchase, and the defect was not caused by inappropriate usage or mishandling of product.
2. Product warranty is limited to 12 months within the purchase date, and covers the main projector only. The warranty does not cover accessories and defects caused by inappropriate usage or mishandling of product.
Projection Technology Resolution Light Source Brightness (lm) Light output (ANSI lm) Contrast ratio Throw Distance Focus Diagonal Light Source (Type, Life) Operating Power Consumption (W) Input ports
Output ports
Speaker Output Power (W) Keystone Correction Fan Noise (dB) Weight (kg) Dimensions (mm)
Phobos LCD 1920 x 1080 (Full HD) 10500 200 1000:1 1.3:1 manual 35-175'' CSP LED, 30000
Deimos LCD 1920 x 1080 (Full HD) 10500 200 1000:1 1.57:1 manual 32-176'' CSP LED, 30000
65 (19V, 3.42A)
65 (19V, 3.42A)
HDMI, USB Type C, MicroSD, WiFi HDMI, USB Type A, MicroSD, WiFi
stereo mini jack, USB Type A (5, 0.5A)
stereo mini jack, USB Type A (5, 0.5A)
5
5
V= ±30° H= ±10°
V= ±30° H= ±10°
37.3-43
37.3-43
1.3
1.3
232 x 169 x 92
232 x 169 x 92
Contact Information
Company Name: Malead Limited. Company address: Flat/Rm 9, 25/F Concordia Plaza, 1 Science Museum Road, Tsimshatsui, Kowloon, Hong Kong. Material: plastic, metal. Warranty: 12 months. Made in China.
EN
15
, 2E. , , - -.
EZCast
www.EZCast.com/app, EZCast . , QR- . ( iOS EZCast App Store, Android - Google Play).
16
UA
:
1. ' , , .
2. , .
3. , , , , .
4. , .
5. . 6. .
. 5 30 °C. 7. (, , ). 8. , . 9. , , . 10. . . 11. 8 30 .
, ' , . .
UA
17
DC
'
« » «», «», «», «»
USB
HDMI
Micro SD
USB-C ( )
( )
« »
«OK»
«»
«OK»
«», «», «», «»
«»
18
UA
DC
HDMI
( )
1. , .
2. .
3. , 3 , , .
4. ,
.
1. : - : , . - : , .
2. : , -
.
( )
UA
( )
19
1. . 2. Wi-Fi:
. () 3. -
: «Android», «iOS», «MacOS», «Windows», «Bluetooth», «EZCast», «Multimedia», «HDMI», «Type C» ( ) «Settings», .
2E projector
1. : , .
2. : 3 , , .
1. USB- USB1 SD- SD- .
2. «Multimedia»-«USB Disk» «SD Card»-«Video», «Music» «Photo», .
3. «» «» «OK» .
4. «OK», , «» «».
5. : , .
20
UA
, «OK» . 1. Wi-Fi: «Wi-Fi Setting» -
Wi-Fi, «Internet», «OK» , .
2. : / .
3. : . , . * : .
4. : ±30 ( ).
5. : ±10 .
6. 4- : , , , .
7. : , , , , .
8. : USB- . 9. : Front / Front Ceiling / Rear /
Rear Ceiling. 10. : . 11. : «Yes»,
. . , , , .
UA
21
USB-
Android 1. «Android» ,
«Plug and Play», «OK». 2. USB--
. 3. MiraPlug. 4. .
iOS 1. «iOS» , «Plug
and Play», «OK». 2. USB--
, «Trust This Computer», . : ' , .
22
UA
Windows
1. «Windows» ,
«Plug and Play», «OK».
2. EZCast . https://
www.ezcast.com/app, EZCast.
3. ' USB A-to-A.
4. EZcast ' .
5. «Beam-XXXX» «Search device»
, .
MacOS
1. «MacOS» , «Plug
and Play», «OK».
2. EZCast . https://
www.ezcast.com/app, EZCast.
3. ' USB A-to-A.
4. EZcast ' .
5. «Beam-XXXX» «Search device»
, .
UA
23
Android 1. «Android» ,
«Wireless», «OK». 2.
«Beam-XXXX» , . 1: (https://www.ezcast.com/usage/android/ezmirror). 2: : Android 5.0 .
iOS 1. «iOS» ,
«Wireless», «OK». 2. ,
Wi-Fi-. 3. «Screen Mirroring» -
«Beam-XXXX» , . : : iOS 12 .
24
UA
Windows 10
1. «Windows» ,
«Wireless», «OK».
2. , '
Wi-Fi-.
3.
'
«Beam-XXXX», .
: Windows 10 .
MacOS
1. «MacOS» , «Wireless», «OK».
2. , ' Wi-Fi-.
3. Screen Mirroring ' «BeamXXXX» , .
UA
25
Google Home Screen Mirroring ( Android)
1. «Android» , «Google Home», «OK».
2. , Wi-Fi-.
3. Google Home Google Play.
4. Google Home : Beamxxxx > Cast my screen > Cast screen.
Bluetooth
«Bluetooth», Bluetooth-.
: Bluetooth ' «Beam-XXXX» . .
: «» / ', Bluetooth '. '.
26
UA
EZCast
1. EZCast , Wi-Fi-.
2. EZCast . https://www.ezcast.com/ app, EZCast .
3. EZCast , «Beam-XXXX» , .
DLNA
1. ( EZCast , Wi-Fi-.
2. , DLNA, QIY, QQTV. 3. DLNA , ,
«Beam-XXXX».
: DLNA ( ).
UA
27
-
/
-
1. , . 2. 3 , , , .
1. , . 2. , . 3. , . 4. , SSID .
1. . 2. , .
1. , . 2. , . 3. , , , .
1. , . 2. . 3. «OTA upgrade» . 4. , .
1. . 2. , '.
.
10 , .
28
UA
: b/g/n/ 2400-2483.5, a/n/ac 5150-5250 : b/g/n/a 100(20), n/ac 79.43(19) : 1.0
« » , Phobos/Deimos . : https://2e.ua/docs
UA
29
1. , ' 14 , .
2. 12 . , .
(, ) () () () () ()
LCD 1920 x 1080 (Full HD) 10500 200 1000:1 1.3:1 35-175'' CSP LED, 30000
LCD 1920 x 1080 (Full HD) 10500 200 1000:1 1.57:1 32-176'' CSP LED, 30000
65 (19 , 3.42 A)
65 (19 , 3.42 A)
HDMI, USB Type C, MicroSD, WiFi
HDMI, USB Type A, MicroSD, WiFi
stereo mini jack, USB Type A (5, 0.5A) stereo mini jack, USB Type A (5, 0.5A)
5
5
V= ±30° H= ±10°
V= ±30° H= ±10°
37.3-43 1.3 232 x 169 x 92
37.3-43 1.3 232 x 169 x 92
: . : /. 9, 25/ , 1 , , , . : «». : . , . 18, . , 04073. : , . . . : 12 . : 2 . .
30
UA
2E. , , .
EZCast
www.EZCast.com/app, EZCast . , QR- . ( iOS EZCast App Store, Android Google Play).
RU
31
:
1. , .
2. .
3. , , , , .
4. , .
5. . 6. . -
. 5 30 °C. 7. (, , . .). 8. . 9. , , . 10. . . 11. 8 30 .
, , . .
32
RU
DC
USB
HDMI
Micro SD
USB-C ( )
« » «», «», «», «»
« »
«OK»
«»
«»
«OK»
«», «», «», «»
RU
33
DC
HDMI
( )
1. , . 2. -
. 3. ,
3 , , . 4. ,
.
1. : - : , . - : , .
2. : -
.
( )
34
( )
RU
1. . 2. Wi-Fi:
. () 3. -
: «Android», «iOS», «MacOS», «Windows», «Bluetooth», «EZCast», «Multimedia», «HDMI», «Type C» ( ) «Settings», .
2E projector
1. : , .
2. : 3 , , .
1. USB- USB1 SD- SD- .
2. «Multimedia»-«USB Disk» «SD Card»-«Video», «Music» «Photo», .
3. «» «» «OK» .
4. «OK», , «» «».
5. : , .
RU
35
, «OK» . 1. Wi-Fi: «Wi-Fi Setting» -
Wi-Fi, «Internet», «OK» , .
2. : / .
3. : -
. ,
. * :
.
4. :
±30 (
).
5. :
±10 .
6. 4- : ,
,
.
7. : , , , ,
.
8. : USB-
.
9. : Front/Front Ceiling/Rear/
Rear Ceiling.
10. : .
11. : «Yes»,
. .
, ,
, .
36
RU
USB-
Android
1. «Android» , «Plug and Play», «OK».
2. USB-. 3. MiraPlug. 4. .
iOS
1. «iOS» , «Plug and Play», «OK».
2. USB-, «Trust This Computer», .
: , .
RU
37
Windows
1. «Windows» , «Plug
and Play», «OK».
2. EZCast .
https://www.ezcast.com/app, EZCast.
3. USB A-to-A.
4. EZcast .
5. «Beam-XXXX» «Search device»
, .
MacOS
1. «MacOS» , «Plug
and Play», «OK».
2. EZCast .
https://www.ezcast.com/app, EZCast.
3. USB A-to-A.
4. EZcast .
5. «Beam-XXXX» «Search device»
, .
38
RU
Android 1. «Android» ,
«Wireless», «OK». 2. -
«Beam-XXXX» , . 1: (https://www.ezcast.com/usage/android/ezmirror). 2: : Android 5.0 .
iOS 1. «iOS» ,
«Wireless», «OK». 2. ,
Wi-Fi-. 3. «Screen Mirroring» 4. «Beam-XXXX» , . : : iOS 12 .
RU
39
Windows 10
1. «Windows» ,
«Wireless», «OK».
2. ,
Wi-Fi-.
3.
«Beam-XXXX», .
: Windows 10 .
MacOS
1. «MacOS» , «Wireless», «OK».
2. , Wi-Fi-.
3. Screen Mirroring «Beam-XXXX» , .
40
RU
Google Home Screen Mirroring ( Android)
1. «Android» , «Google Home», «OK».
2. , Wi-Fi-.
3. Google Home Google Play. 4. Google Home :
Beam-xxxx > Cast my screen > Cast screen.
Bluetooth
«Bluetooth», Bluetooth-.
: Bluetooth «Beam-XXXX» . .
: «» / , Bluetooth . .
RU
41
EZCast
1. EZCast , Wi-Fi-.
2. EZCast . https://www.ezcast.com/app, EZCast .
3. EZCast , «Beam-XXXX» , .
DLNA
1. EZCast , Wi-Fi-.
2. , DLNA, QIY, QQTV. 3. DLNA , ,
«Beam-XXXX».
: DLNA ( ).
42
RU
1. , . 2. 3 , , , .
1. , . 2. , . 3. , . 4. , SSID .
-
1. . 2. , .
/
1. , . 2. , . 3. , , , .
-
1. , . 2. . 3. «OTA upgrade» . 4. , .
1. . 2. , .
.
10
, .
RU
43
1. , ' 14 , .
2. 12 . , .
(, ) ()
() () () ()
LCD 1920 x 1080 (Full HD) 10500 200 1000:1 1.3:1 35-175'' CSP LED, 30000
LCD 1920 x 1080 (Full HD) 10500 200 1000:1 1.57:1 32-176'' CSP LED, 30000
65 (19 , 3.42 A)
65 (19 , 3.42 A)
HDMI, USB Type C, MicroSD, WiFi
HDMI, USB Type A, MicroSD, WiFi
stereo mini jack, USB Type A (5, 0.5A)
stereo mini jack, USB Type A (5, 0.5A)
5
5
V= ±30° H= ±10°
V= ±30° H= ±10°
37.3-43 1.3 232 x 169 x 92
37.3-43 1.3 232 x 169 x 92
: . : /. 9, 25/ , , , , . : , . : 12 . : 2 . .
44
RU
Warranty card/ /
Product information/ / Product// Model/ Serial number/ / Seller Information/ / Trade organization name/ / The address// Date of sale/ / Seller stamp/ /
Coupon/ 3
Seller stamp/ /
Coupon/ 2
Seller stamp/ /
Coupon/ 1
Seller stamp/ /
Date of the application/ / Cause of damage/ / Date of completion/ /
Date of the application/ / Cause of damage/ / Date of completion/ /
Date of the application/ / Cause of damage/ / Date of completion/ /