Installation Guide for STREET WRAP models including: Principal LED Street Wrap Flex Pod, Principal LED, Street Wrap Flex Pod, Wrap Flex Pod, Flex Pod

Street Wrap Flex Pod Instructions Guide [Recovered].ai

STREET WRAP™ FLEX POD

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 2 Pages, 20.84MB

Document Document

STREET WRAPTM FLEX POD
PRODUCT GUIDE
CUTTING AND CONNECTION
Installation Tools

1. Silicone Insert 2. Silicone End Cap 3. Silicone Glue 4. Pipe Cutter

Instructions for Cutting and Connection

1. Cut on the designated cut mark.

2. Clean cut end before next steps.

1

2

3. Install silicone insert after cut.

4. Apply silicone glue to silicone end cap, making sure that the cut section is completely sealed.

STREET WRAPTM FLEX POD
PRODUCT GUIDE
Install Instructions
Mounting Accessories 1. 3.28 ft. aluminum extrusion 2. Back Bend Flexible Chain

Notes: There are no pre-drilled holes in the aluminum extrusion, please drill holes accordingly to meet eld requirements, using the appropriate screw.
Installation and Warning Lighting Surface

Flex Pod only bends as shown above. For specs visit: P-LED.com/product/families/street-wrap-flex

REV20221109