📘 Smith's Environmental Products manuals • Free online PDFs
Smith's Environmental Products logo

Smith's Environmental Products Manuals & User Guides

British manufacturer of heating and cooling products, specializing in plinth heaters and fan convectors for residential and commercial use.

Tip: include the full model number printed on your Smith's Environmental Products label for the best match.

About Smith's Environmental Products manuals on Manuals.plus

Smith's Environmental Products is a leading UK-based manufacturer of heating and cooling solutions tailored for both residential and commercial applications. The company is best known for its space-saving innovation, the 공간 절약 plinth heater, which fits discreetly into kitchen plinths to free up wall space.

Smith's also produces the 카스피안 range of commercial fan convectors and the 에코파워애드 series, all designed to work efficiently with hydronic central heating systems, including those powered by renewable sources like air and ground source heat pumps.

Smith's Environmental Products manuals

최신 매뉴얼 manuals+ 이 브랜드를 위해 큐레이션되었습니다.

Smithsep UVC 팬 컨벡터 사용자 가이드

22년 2025월 XNUMX일
Smithsep UVC 팬 컨벡터 사양 모터: EC(BMS 호환) 마감 Casing: Galvanised steel 1.2mm Filter Class: G2, 100% polyester, non-washable Installation: Suitable for two-pipe central heating systems. Unit must be…

Smith's Environmental Products video guides

이 브랜드의 설정, 설치 및 문제 해결 비디오를 시청하세요.

Smith's Environmental Products support FAQ

이 브랜드의 매뉴얼, 등록, 지원에 대한 일반적인 질문입니다.

  • Why is my Smith's fan convector not running?

    Check that the power supply is switched on via the fused spur and that the central heating system is active. The unit also requires the water temperature to be above 38°C to activate the fan.

  • How do I register my Smith's product warranty?

    You can register your product online at the official Smith's Environmental Products web제품 등록 섹션에서 해당 사이트를 확인하세요.

  • Does the fan convector work with heat pumps?

    Yes, many Smith's models like the Caspian and Eco-Powerad are designed to operate effectively with lower water temperatures typical of heat pump systems (down to 40°C).

  • Where is the fuse located for my heater?

    The unit is typically connected via a double-pole 3A fused spur, which should be accessible near the installation but not directly above the heater.