BOULT AUDIO AirBass GearPods True Wireless Earbuds 사용 설명서

AirBass GearPods True Wireless Earbuds

PROBASS GEARPODS USER MANUAL

제품 소개
PROBASS GEARPODS USER MANUAL

버튼 기능 요약

포드 충전 핀

Case Charging Pods for Pods Type- C Charging Connector

충전 포드 표시기

1. 이어버드에 연결하기
First time Setup: Take earbuds out from the case, the earbuds will automatically turn on. Turn your device Bluetooth on. Search for “Boult Audio Gearpods” and select to connect.
Boult Audio Gearpods
Regular use : Once next use, the earbuds will automatically connect with a preconnected device.
2. 듣기 시작
이어버드를 귀에 끼우고 약간 비틀어서 편안하고 꼭 맞는 t.
Note: Regularly clean the dust mesh after use to avoid the sound being blocked by dirt and debris.

3. Power On & Off
Power-On Y Remove the earbuds from the case, they will automatically turn
켜고 서로 페어링합니다.
Y Long press the touch control area on both earbuds at the same time for 2 seconds, then the earbuds will turn on and pair with each other.
Light status : One side ash red and blue LED light alternatively, another side ash blue LED light quickly.
Power-Off Y Earbuds will automatically turn off and enter charging mode
케이스에 넣을 때.
Y Disconnecting the Bluetooth from device and laying the earbuds down for 3 mins will turn them off.
Y Disconnecting the Bluetooth from device, long press the touch control area for 5s and the earbuds will turn off.
4. 충전 시작
Charging the Earbuds Place the earbuds into the case, once the charging pin connects, the light on the charging case will turn on to display the case battery remains, then the rst and forth light keep white on indicate the earbuds charging, light off means the battery is full.

케이스 충전
Plug the charging case into 5V/1A adapter with a Type-C cable (include in the package). The charging light will ash white when charging. When full the white light will stay on and the case should be disconnected from the power source.

5. 사양

Bluetooth Standard: Version 5.1 Bluetooth Pro le: HSP/HFP/A2DP/AVRCP
출력 볼륨tage of Base: 3.7V Charging time Earbuds- 1.5H, Charging case- 1H Working distance: 10M Compatible System: Android/IOS/Windows

Music Play/Pause Next Song Previous Song Pick up call End call/Reject call Voice Assistant

Single Click on L or R earbud Double click the R earbud Double click the L earbud Single Click on L or R earbud Double-click on L or R earbud Long press 3 Seconds L or R earbud

6. Clear to pairing
Clear the pairing record of earbuds and mobile phones: Take out the earbuds from the charging case, and touch the left and right earbud 5 times, it will clear the record of the Bluetooth device. Then search for the Bluetooth name ” Boult Audio Gearpods” to pair.
Boult Audio Gearpods
Resume pairing of left and right earbuds: Put earbuds in the charging case and charging, then take earbuds out of the charging case when they charging a few minutes. they will enter into pairing mode automatically.

문제 해결
P: The earbuds don’t pair with each other? A: Place the earbuds into case for charging a few seconds. take them out of the case and try to connect again.
P: The earbuds don’t charge when place into the case. A: Check to see if the charging case light will turn on when earbuds are placed inside. If it doesn’t light up charge the case
첫 번째.
P: 사운드가 좌우 밸런스가 맞지 않습니다. A: 사용 후 이어버드 메쉬를 청소하십시오.

문서 / 리소스

BOULT AUDIO AirBass GearPods 트루 와이어리스 이어버드 [pdf] 사용 설명서
AirBass GearPods, 진정한 무선 이어버드, 무선 이어버드, AirBass GearPods, 이어버드

코멘트를 남겨주세요

귀하의 이메일 주소는 공개되지 않습니다.