Apple AirPods Pro 2nd Gen (Lightning) Replacement Charging Case (A2700) User Manual

소개 및 이상view

This manual provides instructions for the Apple AirPods Pro 2nd Generation (Lightning) Replacement Charging Case, model A2700. This product is designed to replace a lost or damaged original charging case, offering seamless connectivity and reliable performance for your existing AirPods Pro 2nd Generation (Lightning) earbuds.

중요 호환성 참고 사항: This replacement charging case is exclusively compatible with Apple AirPods Pro (2nd Generation) with Lightning connector. It pairs specifically with the left AirPod Pro (A2699) and right AirPod Pro (A2698) from the 2nd Generation Lightning model. It is not compatible with other AirPods models, including AirPods Pro (1st Generation) or AirPods Pro (2nd Generation) with USB-C connector.

Image: The Apple AirPods Pro 2nd Generation (Lightning) Replacement Charging Case (Model A2700) in white. This image shows the exterior of the charging case, which is designed to hold and charge the AirPods Pro earbuds.

설치 지침

Follow these steps to set up and pair your new replacement charging case with your AirPods Pro 2nd Generation (Lightning) earbuds:

1. 사건 청구: Before pairing, ensure the replacement charging case is sufficiently charged. Connect the Lightning cable (not included) to the charging port on the bottom of the case and the other end to a USB power adapter. The status light on the front of the case will indicate charging status.
2. Place AirPods in Case: Insert your left and right AirPods Pro 2nd Generation (Lightning) earbuds into the new charging case. Ensure they are seated correctly.
3. 뚜껑을 닫으세요: 충전 케이스의 뚜껑을 닫습니다.
4. 장치와 페어링:
   • Open the charging case lid with your AirPods inside, and hold it near your iPhone or iPad.
   • A setup animation should appear on your device's screen. Follow the on-screen instructions to connect.
   • If the animation does not appear, go to your device's Bluetooth settings, find your AirPods in the list, and tap "i" (information) next to them. Then tap "Forget This Device." After forgetting, repeat the steps above.
5. 재설정(필요한 경우): If pairing issues persist, with the AirPods in the case and the lid open, press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber, then white. Then, try pairing again.

작동 지침

This section details the basic operation of your replacement charging case.

• AirPod 충전: Simply place your AirPods Pro 2nd Generation (Lightning) into the charging case. They will begin charging automatically. The case itself holds multiple charges for your AirPods.
• 케이스 충전:
  • 유선 충전: Connect a Lightning cable to the port on the bottom of the case.
  • 무선 충전: Place the case with the status light facing up on a Qi-certified wireless charging mat.
  • MagSafe 충전: The case is compatible with MagSafe chargers for convenient magnetic alignment and faster wireless charging.
• 배터리 상태 확인:
  • Case Status Light:
    • 녹색불: Fully charged (or AirPods fully charged if they are inside).
    • 황색 신호: Less than one full charge remaining.
    • 깜박이는 흰색 표시등: 페어링 할 준비가되었습니다.
    • 깜박이는 황색 표시등: Pairing error, or needs to be reset.
  • iPhone / iPad : Open the case lid near your iOS device, and the battery status for both AirPods and the case will appear on screen. You can also add the Batteries widget to your device's Today View.

유지

Proper care ensures the longevity and performance of your charging case.

• 청소:
  • Wipe the exterior of the case with a soft, lint-free cloth.
  • 완고한 자국의 경우 약간 dampen the cloth with water or a 70% isopropyl alcohol solution.
  • Do not use abrasive materials, sprays, or solvents.
  • Ensure no moisture enters the charging ports or speaker openings.
• 저장: Store the charging case in a clean, dry environment away from extreme temperatures.
• 손상을 방지하세요: Protect the case from drops, impacts, and exposure to liquids. The case is not water-resistant.

문제 해결

If you encounter issues with your replacement charging case, try the following solutions:

• AirPod가 충전되지 않음:
  • 충전 케이스 자체가 충전되어 있는지 확인하세요.
  • Verify that the AirPods are correctly seated in the case.
  • Clean the charging contacts on both the AirPods and inside the case with a dry cotton swab.
• Case Not Charging:
  • Check the Lightning cable for damage and ensure it's securely connected. Try a different cable and power adapter.
  • If using wireless charging, ensure the case is properly aligned on the charging mat and the mat is powered.
• 페어링 문제:
  • Ensure your AirPods are AirPods Pro 2nd Generation (Lightning) model.
  • Perform a reset of the charging case: With AirPods inside and lid open, press and hold the setup button on the back for about 15 seconds until the status light flashes amber, then white.
  • On your iOS device, go to Bluetooth settings, "Forget This Device" for your AirPods, then try pairing again.
• Status Light Not Responding:
  • Try charging the case for at least 30 minutes.
  • Perform a hard reset as described in "Pairing Issues."

If problems persist, contact the seller or Apple Support for further assistance.

명세서

보증 및 지원

This replacement charging case comes with a 90일 보증 구매일로부터. 본 보증은 제조상의 결함에 대한 보증이며, 정상적인 사용 환경에서 제품이 의도한 대로 작동하는지 확인합니다.

For warranty claims, technical support, or further assistance, please contact the seller from whom you purchased this product. You may also refer to the official Apple Support website for general AirPods Pro information and troubleshooting guides.

보증을 위해 구매 증빙서류를 보관하세요.