ikasus Android Auto Retrofit with Wireless Carplay Instruction Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of the ikasus Android Auto Retrofit module with Wireless Carplay. This system is designed to integrate Android Auto and Apple Carplay functionalities into compatible BMW vehicles equipped with the NBT infotainment system. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

호환성: This module is compatible with BMW F07, F10, F15, F20, F25, F30, F80 series vehicles that feature the NBT system.

2. 제품 오버view 및 구성 요소

The ikasus retrofit kit includes the main interface module and various cables required for integration with your vehicle's existing NBT system. Familiarize yourself with all components before beginning installation.

그림 2.1: Main module and accessory cables. The module features ports for CAN, Power, USB, Video, Toggle Switch, and LVDS In/Out. Accessories include a power cable, video output cable, USB cable, microphone, and WiFi antenna.

그림 2.2: Complete kit contents, including the main module, power harness, LVDS cables, USB cable, microphone, and WiFi antenna.

2.1 Main Module Ports

• CAN : Connection for CAN bus communication.
• 힘: 전원 입력 연결.
• USB: USB port for data transfer or updates.
• 동영상: Video input/output port.
• 토글 스위치: Port for an external toggle switch (if included/required).
• LVDS에서: Input for the vehicle's original LVDS display signal.
• OUT LVDS: Output for the modified LVDS display signal to the vehicle's screen.
• 와이파이: Connection point for the external WiFi antenna.

그림 2.3: Rear panel of the module, highlighting the CAN, Power, USB, Video ports, and the DIP switch bank for configuration.

3. 설정 및 설치

Installation of this retrofit module involves working with your vehicle's electrical and infotainment systems. 전문 설치를 적극 권장합니다. to ensure correct wiring and avoid damage to the vehicle or the module.

3.1 설치 전 체크리스트

• 시동을 걸기 전에 차량의 시동이 꺼져 있고 배터리가 분리되어 있는지 확인하십시오.
• 섹션 2에 나열된 모든 구성 요소가 있는지 확인하십시오.
• Have necessary tools available (e.g., trim removal tools, screwdrivers, wire strippers/crimpers if needed).
• Identify the location of your vehicle's NBT head unit and display screen.

3.2 General Installation Steps (Consult a professional for specific vehicle instructions)

1. 헤드 유닛에 접속하세요: Carefully remove the necessary trim panels and components to gain access to the rear of your BMW's NBT head unit.
2. 기존 케이블을 분리하세요: Disconnect the main power harness and the LVDS cable from the NBT head unit.
3. 전원 하네스 연결: Connect the provided power harness from the retrofit module in-line with the vehicle's original power harness and the NBT head unit.
4. LVDS 케이블을 연결하세요: Connect the vehicle's original LVDS cable to the "IN LVDS" port on the retrofit module. Connect the provided "OUT LVDS" cable from the module to the NBT head unit's LVDS input.
5. Connect USB and Microphone: Route the USB cable and microphone to desired locations within the cabin and connect them to the module.
6. WiFi 안테나 연결: Attach the WiFi antenna to the designated port on the module.
7. DIP 스위치 구성: Configure the DIP switches on the module according to your specific vehicle model and screen resolution. Refer to the separate DIP switch configuration guide (if provided) or consult the manufacturer's support. Incorrect DIP switch settings can lead to display issues.
8. 모듈을 안전하게 보호하세요: Find a suitable, secure location behind the dashboard to mount the retrofit module, ensuring it does not interfere with other components or wiring.
9. 배터리를 다시 연결하고 테스트하세요. Reconnect the vehicle's battery. Turn on the ignition and test the functionality of the NBT system and the newly installed retrofit module.
10. 재조립: Once functionality is confirmed, carefully reassemble all trim panels and components.

4. 사용 설명서

After successful installation, the ikasus module allows you to access Wireless Carplay and Android Auto functionalities on your BMW's NBT screen.

그림 4.1: Example of Carplay and Android Auto interfaces displayed on a BMW NBT screen.

4.1 Switching Between Original NBT and Retrofit System

Typically, you can switch between the original NBT interface and the Carplay/Android Auto interface by long-pressing a specific button on your iDrive controller (e.g., MENU or BACK button). Refer to the specific instructions provided with your module or consult the manufacturer's support for the exact button combination.

4.2 Connecting to Wireless Carplay / Android Auto

1. Bluetooth 및 Wi-Fi 활성화: 스마트폰에서 블루투스와 Wi-Fi가 모두 켜져 있는지 확인하세요.
2. 블루투스 페어링: On the retrofit module's interface (displayed on your car screen), navigate to the Bluetooth settings. 검색 스마트폰과 페어링하세요.
3. 자동 연결: Once Bluetooth is paired, the system should automatically prompt you to connect to Wireless Carplay or Android Auto via Wi-Fi. Accept the connection on your phone.
4. USB 연결(선택 사항): For wired Carplay/Android Auto, connect your smartphone to the module's USB port using a high-quality USB cable.

4.3 Using Carplay / Android Auto

• Navigate through the Carplay or Android Auto interface using your vehicle's iDrive controller.
• Access navigation apps, music streaming, messaging, and voice assistants (Siri/Google Assistant) directly from your car's screen.
• 내장 마이크를 통해 핸즈프리 통화 및 음성 명령이 가능합니다.

5. 유지관리

The ikasus Android Auto Retrofit module is designed for minimal maintenance. Follow these guidelines to ensure longevity:

• 건조하게 유지하세요: 모듈과 연결부가 항상 건조하고 습기가 없도록 하십시오.
• 청결: Keep the area around the module free from dust and debris. Do not use harsh chemicals to clean the module itself.
• 소프트웨어 업데이트: 정기적으로 제조업체를 확인하십시오 website for any available firmware updates for the module. Updates can improve performance and add new features. Follow the provided instructions carefully for any update procedures.
• 케이블 무결성: Periodically inspect all connected cables for any signs of wear or damage.

6. 문제 해결

If you encounter issues with your ikasus Android Auto Retrofit module, refer to the following common problems and solutions:

If problems persist after attempting these solutions, please contact ikasus customer support for further assistance.

7. 사양

8. 보증 및 지원

For warranty information, please refer to the purchase documentation or contact your retailer. For technical support, installation guidance, or troubleshooting assistance beyond this manual, please contact ikasus customer service. Provide your product model number (AUTO-YQ-PL-QJ1019X) and a detailed description of your issue for efficient support.