CaDA C55082W Kick Sauber F1 Team C45 Building Blocks Car Instruction Manual

소개

This instruction manual provides detailed guidance for assembling and maintaining your CaDA C55082W Kick Sauber F1 Team C45 building blocks car model. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

안전 경고

• 경고: 질식 위험 - 작은 부품이 포함되어 있습니다. 3세 미만 어린이는 사용하지 마십시오.
• 질식 사고를 예방하기 위해 모든 포장재는 어린이의 손이 닿지 않는 곳에 보관하십시오.
• Ensure all pieces are securely connected to prevent accidental detachment and potential hazards.

제품 끝view

The CaDA C55082W is an officially licensed 1:24 scale replica of the KICK Sauber F1 Team C45 (2025) race car. This building set includes 348 pieces designed for adults and teens, offering a detailed and authentic construction experience.

주요 특징

• Officially Licensed KICK Sauber F1 Team C45 (2025): Faithfully recreates the C45 Formula 1 race car at an accurate 1:24 scale.
• Two Sets Of Car Body Painting: Includes options for Car No. 27 of "Nico Hockenberg" and Car No. 5 of "Gabriel Botoletto" for display variety.
• Highly Detailed Formula 1 Design: Features realistic front wing, steering wheel, halo, cockpit, rear wing, and detailed sponsor logos with high-definition printed graphics.
• Custom Molded Parts & Racing Slick Tires: Specially molded elements like the steering wheel, mirrors, and aerodynamic details, combined with front narrow and rear wide slick tires, enhance realism.
• Display-Ready with Licensed Nameplate: Comes with an official licensed display nameplate, suitable for desktop display or model collections.

Image: The fully assembled CaDA C55082W Kick Sauber F1 Team C45 model, showcasing its detailed design and vibrant green and black livery.

Image: Comparison of the CaDA C55082W model with two different car body painting options, highlighting the choice between driver numbers 27 and 5.

Image: A visual representation of the 1:24 scale of the CaDA C55082W model compared to a real F1 car, emphasizing its accurate proportions.

이미지: 클로즈업 view of special molded pieces included in the CaDA C55082W set, such as the halo system, steering wheel, and rearview mirror, along with authentic wheel sizes.

설정 및 조립

Follow these steps to assemble your CaDA C55082W model. Refer to the included instruction manual for detailed diagrams and piece identification.

1. 구성 요소 풀기: 포장에서 모든 블록과 설명서를 조심스럽게 꺼내세요.
2. 조각 정렬: Organize the pieces by color, size, or type as indicated in the instruction manual. This will simplify the assembly process.
3. 지시사항을 따르세요: Begin assembling the car model by following the step-by-step instructions and diagrams provided in the manual. Ensure each connection is firm and secure.
4. 조립 확인: 모든 단계를 완료한 후 다시view the model to ensure all parts are correctly placed and the structure is stable.
5. Apply Decals (if applicable): If your model includes decals, apply them carefully according to the manual's guidance for the desired car number (27 or 5).

Note: The manufacturer's instruction manual is the primary guide for assembly. This section provides general steps.

모델 표시

Once assembled, your CaDA C55082W model is ready for display. Use the included licensed nameplate to enhance its presentation.

• 모형이 떨어지는 것을 방지하기 위해 평평하고 안정적인 표면에 놓으십시오.
• Position the display nameplate in front of or next to the model.
• Avoid direct sunlight or extreme temperatures to preserve the color and integrity of the plastic bricks.

유지

Proper care will ensure the longevity and appearance of your building blocks model.

• 청소: Gently wipe the model with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp 순한 비누를 묻힌 천으로 닦은 후 즉시 마른 천으로 물기를 제거하십시오. 강한 화학 물질이나 연마성 세척제 사용은 피하십시오.
• 저장: 분해하여 보관할 경우, 분실을 방지하고 먼지와 손상으로부터 보호하기 위해 모든 부품을 밀폐 용기에 넣어 보관하십시오. 서늘하고 건조한 곳에 보관하십시오.
• 손질: Handle the model carefully, especially delicate parts like wings and mirrors, to avoid breakage.

문제 해결

Here are solutions to common issues encountered during assembly or display:

• 누락된 부분: Double-check all packaging and sorting areas. If a piece is genuinely missing, contact CaDA customer support.
• 느슨한 연결: Ensure pieces are pressed firmly together until they click into place. Some connections may require more force.
• Difficulty Identifying Pieces: Refer closely to the instruction manual's diagrams. Pay attention to color, shape, and size. If colors in the manual are unclear, try adjusting lighting or comparing with known pieces.
• 모델 불안정성: Re-examine the connections in the affected area. Ensure all supporting structures are correctly assembled and firmly attached.

명세서

Image: Diagram illustrating the dimensions of the assembled CaDA C55082W model, showing its length, width, and height.

보증 및 지원

For warranty information, missing parts, or technical support, please contact CaDA customer service. Refer to the product packaging or the official CaDA web연락처 정보 사이트.

You can visit the official CaDA store for more information: CaDA Official Store