이븐플로 트리뷰트 LX

Evenflo Tribute LX Convertible Car Seat User Manual

Model: Tribute LX

1. 제품 오버view

The Evenflo Tribute LX Convertible Car Seat is designed to provide safety and comfort for your child. This car seat transitions from rear-facing to forward-facing mode, accommodating children from 5 to 40 pounds and 19 to 40 inches tall. Its compact and lightweight design makes it suitable for smaller vehicles and convenient for travel.

주요 특징:

  • 무게 범위: Rear-facing (5-40 lbs), Forward-facing (30-40 lbs).
  • 높이 범위: Rear-facing (19-40 inches), Forward-facing (35-40 inches).
  • 하네스 시스템: 5-point harness with 4-position shoulder harness adjustment.
  • 조정 성 : Up-front harness adjust for easy secure fit.
  • 편안: Removable plush head pillow for proper head positioning.
  • 편의: Removable, dishwasher-safe cup holder.
  • 유지: Removable, stain-resistant polyester fabrics are machine washable.
Evenflo Tribute LX 컨버터블 카시트, 앞 view with cup holder

그림 1: 전면 view of the Evenflo Tribute LX Convertible Car Seat, showing the 5-point harness and removable cup holder.

2. 안전 정보

The Evenflo Tribute LX Convertible Car Seat meets or exceeds all applicable Federal Safety Standards. In addition to federally required testing, it undergoes structural integrity testing, rollover testing, and temperature testing to ensure maximum safety for your child.

경고:

  • Always read and follow all instructions and warnings provided in the complete car seat manual and your vehicle's owner's manual.
  • 겉으로 보이는 손상이 없더라도, 중대 또는 심각한 충돌 사고에 연루된 카시트는 절대 사용하지 마십시오.
  • Ensure the car seat is properly installed and the child is correctly secured in the harness on every ride.
  • Evenflo에서 승인하지 않은 액세서리나 부품을 사용하지 마십시오.

3. 설정 및 설치

Proper installation is critical for child safety. This car seat can be installed using your vehicle's seat belt system.

3.1 Rear-Facing Installation

For children weighing 5-40 lbs and measuring 19-40 inches. The car seat must be installed in a rear-facing position in the back seat of the vehicle.

Child in Evenflo Tribute LX car seat, rear-facing

그림 2: 예ample of a child properly secured in the car seat in a rear-facing position.

3.2 Forward-Facing Installation

For children weighing 30-40 lbs and measuring 35-40 inches. The car seat must be installed in a forward-facing position in the back seat of the vehicle.

Child in Evenflo Tribute LX car seat, forward-facing

그림 3: 예ample of a child properly secured in the car seat in a forward-facing position.

For detailed step-by-step installation instructions, please refer to the complete instruction manual included with your car seat or visit the Evenflo website. For personalized assistance, contact the Evenflo ParentLink® Consumer Care Team for live video support with a certified car seat safety technician.

4. 사용 설명서

4.1 자녀 보호

  1. 아이를 카시트에 앉히세요.
  2. 안전벨트 끈을 아이의 어깨 위로 넘겨 다리 사이로 넣어주세요.
  3. 버클의 두 혀 부분을 딸깍 소리가 날 때까지 버클에 끼워 넣으세요.
  4. Pull the harness adjustment strap located at the front of the car seat to tighten the harness until it is snug against your child's body. Ensure you cannot pinch any excess web아이의 어깨에 빙.
  5. 가슴 클립을 겨드랑이 높이에 위치시키세요.
Close-up of hands adjusting the car seat harness

Figure 4: Illustration of the up-front harness adjustment mechanism.

4.2 Head Pillow

The plush head pillow provides comfort and support for proper head positioning, especially for smaller infants. It can be removed as your child grows and no longer requires it.

4.3 컵홀더

The car seat includes a removable cup holder for convenience. It can be easily detached for cleaning.

5. 유지관리 및 관리

5.1 원단 세척

The durable, stain-resistant polyester fabrics are removable and machine washable. Refer to the care label on the fabric for specific washing instructions. Typically, use cold water and a gentle cycle. Air dry or tumble dry on low heat.

5.2 Cleaning the Buckle and Harness

  • Wipe the buckle and harness straps with a damp cloth. Do not immerse the buckle in water or use harsh cleaning agents, as this may affect its performance.
  • The cup holder is dishwasher-safe for easy cleaning.

5.3 일반 관리

Periodically inspect the car seat for any signs of wear, damage, or missing parts. Ensure all components are securely attached and functioning correctly.

6. 문제 해결

If you encounter any issues with your Evenflo Tribute LX Convertible Car Seat, please review the complete instruction manual for detailed troubleshooting steps. If the problem persists or you require further assistance, contact Evenflo Customer Service.

Common concerns may include:

  • Difficulty tightening or loosening the harness.
  • Car seat not installing securely in the vehicle.
  • 부품이 누락되었거나 손상되었습니다.

7. 사양

기인하다
상표 이븐플로
모델 트리뷰트 LX
최대 중량 권장 사항 40 파운드
설치 유형 안전벨트
정위 Rear-Facing, Forward-Facing
하네스 유형 5점
높이 위치의 수 1 (for shoulder harness adjustment)
품목 치수(D x W x H) 19인치 깊이 x 17인치 너비 x 25인치 높이
품목 무게 9.29 파운드
재료 유형 폴리에스터, 폴리우레탄
색상 Jupiter Red
한국어: 032884206155
ASIN B0FPSL4V3F
Evenflo Tribute LX Convertible Car Seat dimensions

Figure 5: Dimensions of the Evenflo Tribute LX Convertible Car Seat.

8. 보증 및 지원

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Evenflo website. Evenflo provides a ParentLink® Consumer Care Team for support.

Evenflo ParentLink® Consumer Care Team:

  • Offers help online in real time.
  • Provides live video support with a certified car seat safety technician to assist with proper vehicle installation.

추가 지원이 필요하면 다음을 방문하세요. Evenflo official web대지 또는 고객 서비스에 직접 문의하세요.

© 2026 Evenflo. All rights reserved. This manual is for informational purposes only. Always refer to the physical product manual for complete and up-to-date instructions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.