소개
This manual provides detailed instructions for the setup, operation, and maintenance of your Jectse 5G Mobile Hotspot. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your user experience. Keep this manual for future reference.
Image: The Jectse 5G Mobile Hotspot, a compact and portable device designed for high-speed 5G and WiFi 6 connectivity.
제품 끝view
주요 특징
- Ultra-Fast 5G Connectivity: Supports up to 2.77Gbps download and 1.25Gbps upload speeds with a built-in 1T4R 5G antenna.
- Extensive Network Band Support: Compatible with multiple 5G NR bands (FDD: N1, N3, N28; TDD: N41, N78) and 4G bands (TDD LTE: B34, 38, 39, 40, 41; FDD LTE: B1, B3, B5, B8), and 3G band B1.
- 듀얼 밴드 WiFi 6: Offers 2.4GHz and 5.8GHz WiFi connectivity (802.11 a/b/g/n/ac/ax protocols) for up to 16 devices simultaneously.
- 오래 지속되는 배터리: Equipped with a 7100mAh Li-Ion battery for extended use.
- 견고한 디자인: Features an IP67 rating, making it drop-proof, dust-proof, and rain-proof.
- 사용자 친화적인 LED 디스플레이: Provides information on data usage, signal strength, WiFi credentials, and device settings.
- SIM 카드 슬롯: Supports SIM card compatibility for ease of setup (SIM card not included).
패키지 내용
제품 패키지에는 다음이 포함됩니다.
- 1 x Jectse 5G Mobile Hotspot
- 1 x USB 케이블(Type-C)
- 1 x 사용자 매뉴얼(이 문서)
- 1 x SIM Card Eject Pin
Image: The Jectse 5G Mobile Hotspot device shown alongside its included USB-C charging cable and a SIM card eject pin.
설치 가이드
1. SIM 카드 설치
- 장치의 전원이 꺼져 있는지 확인하세요.
- Locate the SIM card slot on the side of the hotspot.
- Insert the provided SIM eject pin into the small hole next to the SIM card tray. Press gently until the tray pops out.
- Place your activated Nano-SIM card into the tray with the gold contacts facing down and the notched corner aligned correctly.
- Carefully push the SIM card tray back into the slot until it clicks into place.
2. 장치 충전
- Connect the USB-C cable to the charging port on the hotspot.
- USB 케이블의 다른 쪽 끝을 호환되는 USB 전원 어댑터(포함되지 않음)나 컴퓨터의 USB 포트에 연결합니다.
- The LED indicator on the device will show charging status. A full charge is recommended before first use.
3. 전원 켜기 / 끄기
- 전원을 켜려면: Press and hold the Power button (usually located on the side) for a few seconds until the screen or LED indicators light up.
- 전원을 끄려면: Press and hold the Power button until the device prompts you to power off or the indicators turn off.
작동 지침
1. 기기를 핫스팟에 연결하기
- Ensure the Jectse 5G Mobile Hotspot is powered on.
- On your WiFi-enabled device (smartphone, laptop, tablet), open the WiFi settings.
- Scan for available WiFi networks.
- Select the network name (SSID) displayed on your hotspot's screen or indicated in the manual.
- Enter the WiFi password (Key) displayed on the hotspot's screen or in the manual.
- Once connected, your device will have internet access through the hotspot. Up to 16 devices can be connected simultaneously.
Image: The Jectse 5G Mobile Hotspot showing its display with 5G and WiFi 6 indicators, ready for device connection.
2. LED 표시등 이해
The device features an LED light display that provides essential information:
- 신호 강도: 5G/4G 이동통신 신호의 강도를 나타냅니다.
- 배터리 수준: 현재 배터리 충전 상태를 보여줍니다.
- 와이파이 상태: Confirms if WiFi is active and broadcasting.
- 데이터 사용: May display current data consumption (check device interface for details).
- 네트워크 유형 : Indicates whether the device is connected to a 5G or 4G network.
Image: A close-up of the Jectse 5G Mobile Hotspot's LED display, highlighting the 5G and WiFi 6 indicators, along with signal and battery icons.
3. 액세스 Web Management Interface (if applicable)
For advanced settings and configuration, you may access the device's web 관리 인터페이스:
- Connect your computer or smartphone to the hotspot's WiFi network.
- 열기 web browser and enter the default IP address (e.g., 192.168.0.1 or 192.168.1.1). This address is usually found on a sticker inside the SIM card slot or in the quick start guide.
- Enter the default username and password (also typically found on the device sticker or in documentation).
- 에서 web interface, you can manage WiFi settings, change passwords, view 연결된 기기를 확인하고 데이터 사용량을 모니터링합니다.
유지
배터리 관리
- 기기를 극한 온도(0°C 미만 또는 45°C 이상)에 노출시키지 마세요.
- 기기를 장시간 완전히 방전된 상태로 두지 마십시오.
- 장기간 보관하려면 배터리를 약 50~70%까지 충전하세요.
- 충전에는 제공된 USB 케이블만 사용하세요.
청소
- 부드럽고 마른 보풀 없는 천으로 기기를 닦으십시오.
- 액체 세척제, 에어로졸 또는 용제를 사용하지 마십시오.
- 모든 포트에 먼지나 이물질이 없는지 확인하세요.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 인터넷 연결 없음 |
|
|
| 와이파이에 연결할 수 없습니다 |
|
|
| 장치 전원이 켜지지 않음 |
|
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | Jectses1yn2px9gw-11 |
| 치수 | Approx. 136x72x16mm (5.35x2.83x0.63in) |
| 무게 | 10.6 온스 |
| 배터리 | 7100mAh Li-Ion Battery (Built-in) |
| 메모리 | LPDDR4X 4GB RAM, NAND 2GB ROM |
| 충전 포트 | USB-C |
| SIM 카드 유형 | Nano-SIM (Not Included) |
| 셀룰러 네트워크 | 3GPP Rel.15, 5G NR (SA/NSA, Sub 6G), LTE Category 18 |
| 5G NR 대역 | FDD: N1, N3, N28; TDD: N41, N78 |
| 4G 밴드 | FDD: B1, B3, B5, B8; TDD: B34, B38, B39, B40, B41 |
| 3G 대역 | B1 |
| 와이파이 밴드 | WiFi6 2.4GHz, 5.8GHz |
| WiFi 프로토콜 | 802.11 a, b, g, n, ac, ax |
| 최대 와이파이 연결 수 | Up to 16 Devices Simultaneously |
| NR Download Rate | 2.77Gbps (DL) |
| NR Upload Rate | 1.25Gbps (UL) |
| IP 등급 | IP67 (Drop-proof, Dust-proof, Rain-proof) |
Image: The Jectse 5G Mobile Hotspot, illustrating its compact size with approximate dimensions of 136x72x16mm.
중요 참고 사항
- 구매 전asing, ensure that your local network signal frequency band and the SIM card frequency band are compatible with the supported frequency bands of this product.
- This product does not support use in South America, Japan, and South Korea regions.
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or contact Jectse customer service through their official channels. Specific warranty terms may vary by region and retailer.
방문할 수 있습니다 아마존의 Jectse 스토어 자세한 정보를 원하시거나 지원팀에 문의하세요.