AWithZ 9000W Battery Spot Welder UK1 Instruction Manual

1. 서론

구매해주셔서 감사합니다asing the AWithZ 9000W Battery Spot Welder UK1. This portable spot welding machine is designed for DIY battery pack creation and various welding tasks, offering precise control and safety features. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image: AWithZ 9000W Battery Spot Welder UK1, showcasin컴팩트한 디자인입니다.

2. 안전 정보

경고: Improper use of this device can result in serious injury or damage. Always follow safety guidelines.

• 스폿 용접기를 작동할 때는 항상 안전 안경과 장갑을 포함한 적절한 개인 보호 장비(PPE)를 착용하십시오.
• 작업 공간은 환기가 잘 되고 가연성 물질이 없는지 확인하십시오.
• Do not touch the welding pens or welded material immediately after welding, as they will be hot.
• 장치를 물과 습기로부터 멀리하십시오.
• 장치를 분해하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

The AWithZ UK1 Spot Welder package includes all necessary materials for spot welding:

• UK1 스폿 용접기 유닛
• 2 x Spot Welding Pens
• 발 스위치
• Nickel-plated metal strip (1 roll)
• 충전 케이블
• Gauze (for cleaning)
• 사용자 설명서

Image: The complete package contents of the AWithZ UK1 Spot Welder, including the main unit, welding pens, foot switch, nickel strip, charging cable, and manual.

4. 제품 오버view

The AWithZ UK1 features a user-friendly interface and robust design for efficient spot welding.

4.1 주요 특징

• Dual Trigger Modes: Seamlessly switch between hands-free foot switch operation and precise manual control for enhanced safety when handling sensitive batteries.
• Smart Thermal Protection: Continuously monitors battery temperature and automatically stops welding (disables trigger) and alerts for overheating, preventing damage. The device also automatically powers off after 8 minutes of inactivity.
• 초저전력 소모: Optimized for energy efficiency, significantly extending standby time between uses and reducing operating costs.
• Precise 100-Level Output Control: Intuitive knob allows fine-tuning of welding strength across 100 levels, accommodating delicate tasks (smartphone/Bluetooth batteries) and robust applications (cylindrical power batteries).
• Multi-Mode Welding for Diverse Batteries: Clear control panel enables customized settings for specialized welding of cylindrical power batteries, smartphone batteries, and Bluetooth batteries.
• Simple Knob Operation & Clear Interface: Large knob and clearly displayed control panel simplify adjustments (gear, trigger time, mode, continuous spot welding count) for maximum user-friendliness.

4.2 구성 요소 및 제어

Image: Close-up of the AWithZ UK1 Spot Welder's control panel, showing the knob, display, and various indicators.

Image: Diagram illustrating the scientific interface placement design of the AWithZ UK1 Spot Welder, highlighting the front open and side hole welding methods.

5. 설정

5.1 초기 충전

Before first use, fully charge the spot welder using the provided charging cable and a compatible USB power adapter (5V/1A recommended).

5.2 용접 펜 연결하기

1. Insert the gold-plated connectors of the welding pens into the corresponding ports on the front of the spot welder.
2. 안전한 연결을 보장하세요.

5.3 Connecting Foot Switch (Optional)

If using the foot switch for hands-free operation, plug its connector into the designated foot switch port on the device.

Image: Visual guide showing how to connect the spot welding pens and the Type-C charging port on the AWithZ UK1.

6. 사용 설명서

6.1 전원 켜기/끄기

Press and hold the power button to turn the device on or off. The display will illuminate upon power-on.

6.2 용접 매개변수 조정

Use the large knob and control buttons to navigate and adjust settings on the display. Parameters include:

• 기어: Welding strength (1-100 levels). Rotate the knob to adjust.
• 트리거 시간: Duration of the welding pulse.
• 방법: Select between automatic or manual welding.
• Continuous Spot Welding Count: Number of consecutive spot welds.

6.3 용접 모드

• 자동 모드: The device automatically detects contact with the welding material and initiates the weld.
• 수동 모드: Welding is initiated by pressing the trigger button on the welding pen or the foot switch.

6.4 점용접 수행

1. Ensure the welding pens are clean and properly connected.
2. Place the nickel strip or welding material onto the battery terminal.
3. Position the welding pen tips firmly onto the material, ensuring good contact.
4. If in automatic mode, the weld will initiate automatically. If in manual mode, press the trigger button or foot switch.
5. Observe the weld quality and adjust parameters as needed.

이미지: 전amples of various welding applications for the AWithZ UK1 Spot Welder, including button batteries, lithium battery pins, power tool battery packs, cylindrical battery packs, and model aircraft battery packs.

6.5 Welding Material Thickness Reference

Refer to the table below for recommended maximum welding thicknesses for different materials:

Image: A visual representation of the spot welding material thickness reference table, showing different materials and their maximum weldable thicknesses.

7. 유지관리

7.1 Cleaning Welding Tips

Regularly clean the welding pen tips to ensure optimal performance. Use the provided gauze or fine sandpaper to remove any residue or oxidation. Replace tips if they become excessively worn or damaged.

7.2 배터리 관리

• Avoid fully discharging the device's internal battery.
• 배터리 성능을 유지하려면 자주 사용하지 않더라도 정기적으로 기기를 충전하세요.
• 본 제품을 시원하고 건조한 곳에 보관하세요.

7.3 보관

When not in use, store the spot welder and its accessories in a clean, dry environment, away from direct sunlight and extreme temperatures.

8. 문제 해결

If you encounter issues with your AWithZ UK1 Spot Welder, refer to the following common problems and solutions:

• 용접 불량:
  - Ensure welding tips are clean and sharp.
  - Increase the 'Gear' setting (welding strength).
  - Verify good contact between the welding tips and the material.
• Overheating Alert:
  - The device will automatically stop welding if it overheats. Allow it to cool down before resuming operation.
  - Ensure adequate ventilation around the device.
• 장치 전원이 켜지지 않음:
  - Check the battery level and charge the device if necessary.
  - Ensure the power button is pressed and held correctly.
• 용접 불량:
  - Check for loose connections of welding pens or foot switch.
  - Ensure consistent pressure is applied to the welding pens.
  - Experiment with different 'Gear' settings and pulse timings.

9. 사양

10. 보증 정보

The AWithZ 9000W Battery Spot Welder UK1 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact customer support for detailed information regarding warranty terms and conditions.

11. 고객 지원

For any questions, technical assistance, or support needs, please contact AWithZ customer service through the retailer where you purchased the product or visit the official AWithZ website. Our team is dedicated to providing prompt and helpful solutions.