1. 서론
This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.
The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.
그림 1: 전면 view of the Traxon Allegro XB36 LED Wall Washer Flood Light.
2. 안전 정보
- 전기적 위험: Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
- 권tage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
- 접지: 감전을 방지하기 위해 조명 기구가 제대로 접지되었는지 확인하십시오.
- 야외 사용: The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
- 온도: Do not operate the fixture outside its specified ambient temperature range.
- 손질: 조명기구를 조심스럽게 다루십시오. 떨어뜨리거나 심한 충격을 가하지 마십시오.
- 빛의 출처: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.
3. 패키지 내용
포장을 풀 때 모든 구성 요소가 들어 있고 손상되지 않았는지 확인하세요.
- Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
- 장착 브래킷 (사전 부착 또는 별도 구매)
- 사용 설명서(본 문서)
Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.
4. 설정 및 설치
4.1 고정물 장착
- 위치 선택: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
- 위치 브래킷: If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
- 보안 고정 장치: Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.
4.2 전기 연결
The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.
그림 2: 후면 view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.
- 전원 차단: 전기 연결 작업을 하기 전에 회로 차단기에서 주 전원을 차단하십시오.
- 입력 전원 연결: Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
- 데이지체이닝(선택 사항): If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
- 보안 연결: Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.
그림 3: 후면 view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.
Important: All wiring must comply with local electrical codes and regulations.
5. 사용 설명서
- 전원 켜기: Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
- 디밍 : The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
- 빔 각도: The fixture provides a 7° light distribution, ideal for focused wall washing effects.
- 조정: The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.
6. 유지관리
The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.
- 청소: 렌즈와 하우징을 부드러운 천으로 주기적으로 청소하십시오.amp 먼지, 이물질 또는 기타 오염 물질이 쌓여 광량에 영향을 줄 수 있으므로 천으로 닦아내십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 점검: Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
- 수리: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | No power supply; loose electrical connection; faulty fixture. | Check circuit breaker and power source. Verify all electrical connections are secure. If problem persists, contact support. |
| 광 출력이 일정하지 않거나 깜박입니다. | Incompatible dimmer switch; loose connection; power fluctuations. | Ensure a compatible phase-cut dimmer is used. Check electrical connections. Consult an electrician for power supply issues. |
| 설비 내부로 물이 스며들었습니다. | Improperly sealed cable glands or damaged housing. | Immediately disconnect power. Inspect cable glands and housing for damage. Contact support for repair or replacement. |
8. 사양
- 모델: XB.W3.8370110
- 상표: Traxon
- 입력 Voltage: 120VAC
- 왓tage: 44 와트
- 루멘 출력: 2631루멘
- 색온도(CCT): 3000K
- 배광 : 7°
- 디밍 : Phase Cut Dimmable
- IP 등급: IP66 (실외용)
- 건설: Aluminum/Glass
- 마치다: 검은색
- 품목 무게: 13.14파운드(5.96kg)
- 제품 크기: 9 x 5.3 x 11.3인치(22.86 x 13.46 x 28.7cm)
- 제조업체: 오스람
9. 보증 정보
Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.
10. 지원
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.