DERMALOGIC SKYE Plumbing Head Spa Instruction Manual

1. 제품 오버view

The DERMALOGIC SKYE Plumbing Head Spa is a U-shape water massage shampoo backwash unit designed for professional salon and spa environments. This unit integrates advanced features for head therapy, including consistent water circulation, temperature control, and a revitalization therapy machine with steamer and medication functions. It features a durable ABS basin and UPC certified plumbing components.

주요 특징:

• U-shape spa head with 22 outlet holes for consistent water circulation.
• Integrated time and temperature control for customized treatments.
• Advanced Revitalization Therapy Machine for deeper relaxation, including steamer and medication functions.
• Durable ABS basin with a 30-liter basic capacity.
• UPC certified faucet and shower head for reliable plumbing.
• Includes a bowl cover and a 2-liter capacity fumigator steamer.

그림 1.1: 전면 view of the DERMALOGIC SKYE Plumbing Head Spa, showcasin컴팩트한 디자인과 제어판을 갖추고 있습니다.

2. 안전 정보

부상이나 제품 손상을 방지하기 위해 설치 및 작동 전에 모든 안전 지침을 주의 깊게 읽어 주십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.

일반 안전 예방 조치:

• 전기적 위험: Ensure the unit is connected to a properly grounded electrical outlet (AC 110V-220V). Do not operate with wet hands or in excessively damp 환경.
• 물 안전: Always ensure there is adequate water in the basin before activating the water circulation function. Operating the pump dry can cause severe damage.
• 온도 조절: Exercise caution when setting water temperature to prevent burns. Always test water temperature before use.
• 유지: 유지관리나 청소를 하기 전에 전원을 분리하세요.
• 감독: Do not allow children or individuals with reduced physical, sensory, or mental capabilities to operate the unit without supervision.
• 분해 : Disassembly by non-professionals is strictly prohibited. Refer all servicing to qualified personnel.

3. 설정 및 설치

The SKYE Plumbing Head Spa requires proper plumbing and electrical connections. Professional installation is recommended.

포장 풀기 및 배치:

1. 모든 구성품을 포장에서 조심스럽게 꺼내세요. 배송 중 손상된 부분이 있는지 확인하세요.
2. Place the unit on a stable, level surface in the desired location. Ensure sufficient space around the unit for access and ventilation. The unit dimensions are approximately 25.6" (Length) x 24.5" (Width) x 24.5" (Height) and it weighs 71 pounds.

배관 연결:

1. Connect the hot and cold water supply lines to the designated inlets on the unit. Use appropriate plumbing fittings and ensure all connections are watertight.
2. Connect the drain hose from the basin to a suitable wastewater drainage system. Ensure proper slope for efficient drainage.
3. Verify all plumbing connections for leaks before proceeding.

전기 연결:

1. Plug the power cord into a grounded AC 110V-220V electrical outlet. Ensure the outlet meets local electrical codes.

그림 3.1: 측면 view of the head spa unit, showing the overall structure and potential connection points.

4. 사용 설명서

Familiarize yourself with the control panel and functions before operating the unit.

제어판 이상view:

Figure 4.1: Close-up of the control panel, displaying time and temperature settings, and function buttons.

1. 전원 켜기/끄기: Press the 'Power Switch' button to turn the unit on or off.
2. B를 채우세요asin: b를 확인하십시오asin is filled with water to the appropriate level before activating water circulation. The basic capacity is 30 liters.
3. 시간 설정: Use 'Time +' and 'Time -' buttons to adjust the duration of the treatment.
4. 설정 온도: Use 'Temp +' and 'Temp -' buttons to adjust the water temperature. Always verify the temperature before client use.
5. 물 순환: Press 'Water Circulation' to activate the U-shape spa head's water flow. The system output is 800-1000 Watts.
6. 수분 강도: Adjust the intensity of the water massage using the 'Water Intensity' button.
7. LED 조명: Press 'LED Light' to turn the internal LED lighting on or off.
8. Revitalization Therapy Machine (Fumigator): The unit includes a separate fumigator steamer with a 2-liter capacity. Fill the fumigator with water and any desired medication (if applicable and safe for use). Place the fumigator cover over the basin. Activate the fumigator as per its specific instructions. The system output is 1000 Watts.

Figure 4.2: The head spa unit shown with its protective cover and the separate fumigator steamer.

그림 4.3: 상세 view of the U-shape basin, showing the faucet, shower head, and water outlets.

5. 유지관리

Regular maintenance ensures the longevity and optimal performance of your head spa unit.

매일 청소:

• After each use, drain the water from the basin.
• Wipe down the basin and exterior surfaces with a mild, non-abrasive cleaner and a soft cloth.
• Clean the shower head and faucet to prevent mineral buildup.

주간 유지 보수:

• Inspect all plumbing connections for any signs of leaks.
• Clean the fumigator steamer thoroughly, removing any residue.
• Check the water circulation outlets for blockages and clear if necessary.

장기 보관:

• If storing the unit for an extended period, ensure it is completely drained and dry.
• 직사광선과 극한 온도 변화를 피해 깨끗하고 건조한 곳에 보관하십시오.

6. 문제 해결

This section addresses common issues you might encounter with your SKYE Plumbing Head Spa.

7. 사양

Technical specifications for the DERMALOGIC SKYE Plumbing Head Spa.

8. 보증 및 지원

For warranty information, technical support, or service inquiries, please contact the seller, Madison & Park, or the manufacturer, DERMALOGIC, directly. Please have your model number (XSH-HSPA-05-BLKWHT-KIT) and purchase date available when contacting support.

The product is from a small business brand. Your support is appreciated.