ATKGEAR X1

ATKGEAR X1 Series Wireless Gaming Mouse User Manual

Model: ATK X1

1. 서론

Thank you for choosing the ATKGEAR X1 Series Wireless Gaming Mouse. This ultralight, ergonomic gaming mouse is designed for precision and speed, offering versatile connectivity options and customizable performance. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new device to ensure optimal performance.

For the best experience, please read this manual thoroughly before using the mouse.

2. 패키지 내용

Please check the package contents upon unboxing. If any items are missing or damaged, contact ATKGEAR support.

  • ATKGEAR X1 Series Wireless Gaming Mouse
  • 2.4GHz 무선 수신기(USB 동글)
  • USB-C-USB-A 충전/데이터 케이블
  • 사용 설명서 (본 문서)
ATKGEAR X1 Series Wireless Gaming Mouse and accessories

Image 1: ATKGEAR X1 Series Wireless Gaming Mouse with its included accessories.

3. 설정 가이드

3.1 마우스 충전

Before first use, it is recommended to fully charge your ATKGEAR X1 mouse.

  1. Connect the USB-C end of the charging cable to the mouse's USB-C port.
  2. 충전 케이블의 USB-A 끝을 컴퓨터의 전원이 공급되는 USB 포트나 USB 벽면 어댑터에 연결합니다.
  3. The LED indicator on the mouse will show charging status (e.g., solid red for charging, green for fully charged).

3.2 2.4GHz 무선을 통한 연결

For optimal gaming performance, use the 2.4GHz wireless connection.

  1. 패키지에서 2.4GHz 무선 수신기(USB 동글)를 찾으십시오.
  2. Plug the wireless receiver into an available USB port on your computer.
  3. Turn on the mouse using the power switch located on the bottom of the mouse. Select the 2.4GHz mode (usually indicated by a specific switch position or LED color).
  4. Your computer should automatically detect and install the necessary drivers. The mouse is ready for use when the LED indicator shows a stable connection.

3.3 블루투스를 통한 연결

For general use or connecting to devices without a USB-A port, use Bluetooth mode.

  1. Turn on the mouse and switch it to Bluetooth mode (usually indicated by a specific switch position or LED color).
  2. 컴퓨터 또는 기기에서 블루투스 설정으로 이동하여 블루투스가 활성화되어 있는지 확인하십시오.
  3. The mouse should appear in the list of available devices (e.g., "ATKGEAR X1"). Select it to pair.
  4. 화면의 지시에 따라 페어링 과정을 완료하세요.

3.4 유선 USB-C 연결

For a direct, zero-latency connection or while charging, use the wired mode.

  1. 케이블의 USB-C 단자를 마우스에 연결하세요.
  2. 케이블의 USB-A 끝을 컴퓨터의 USB 포트에 연결합니다.
  3. The mouse will automatically switch to wired mode and function as a standard USB mouse.

3.5 ATK HUB 소프트웨어 설치

To customize DPI, macros, LED indicators, debounce time, and polling rate, download and install the ATK HUB software.

  • Visit the official ATKGEAR web사이트 (www.atkgear.com/support) to download the latest version of ATK HUB.
  • 화면의 지시에 따라 소프트웨어를 설치하세요.
  • Launch ATK HUB to access customization options.

4. 사용 설명서

4.1 기본 기능

The ATKGEAR X1 mouse features standard left/right click buttons, a scroll wheel, and additional programmable buttons. Refer to the ATK HUB software for button assignment and macro creation.

4.2 DPI 조정

The mouse supports up to 26,000 DPI. You can adjust the DPI sensitivity on-the-fly using the dedicated DPI button (if available) or through the ATK HUB software. The LED indicator may change color to reflect the current DPI setting.

4.3 폴링 속도 조정

The X1 Series supports an 8000Hz wireless polling rate for ultra-fast response times. The polling rate can be configured via the ATK HUB software to match your preference and system capabilities.

4.4 모드 전환

Use the switch on the bottom of the mouse to toggle between 2.4GHz wireless, Bluetooth, and wired USB-C modes. Ensure the correct mode is selected for your desired connection type.

4.5 배터리 표시등

The mouse features an LED indicator that displays battery status. Consult the ATK HUB software or the product's quick start guide for specific LED patterns indicating battery levels (e.g., low battery warning, charging status).

5. 유지관리

5.1 청소

  • Use a soft, dry, lint-free cloth to clean the surface of the mouse.
  • 잘 지워지지 않는 더러움에는 가볍게 damp천에 물이나 순한 세척액을 묻혀 닦으세요. 강한 화학 물질은 피하세요.
  • 마우스의 몸속으로 액체가 들어가지 않도록 하십시오.
  • Regularly clean the optical sensor area on the bottom of the mouse to ensure accurate tracking.

5.2 보관

장시간 사용하지 않을 때는 마우스를 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요. 배터리 수명을 절약하려면 마우스 전원을 꺼두세요.

6. 문제 해결

문제가능한 원인해결책
마우스가 응답하지 않음Low battery; Incorrect mode selected; Loose connection; Driver issue.Charge the mouse; Ensure the correct mode (2.4GHz, Bluetooth, Wired) is selected; Reconnect the receiver/cable; Restart computer; Reinstall ATK HUB software.
지연 또는 간헐적 연결Interference; Distance from receiver; Low battery; Outdated drivers.Move receiver closer to mouse; Ensure no obstructions; Charge mouse; Update drivers via ATK HUB or OS settings; Try a different USB port.
DPI/Sensitivity issuesIncorrect DPI setting; Software conflict.Adjust DPI using the mouse button or ATK HUB software; Ensure ATK HUB is running correctly.
마우스가 충전되지 않습니다Faulty cable/port; Mouse not properly connected.Try a different USB-C cable and/or USB port; Ensure cable is securely connected to both mouse and power source.

7. 사양

모델ATK X1
연결성2.4GHz 무선, 블루투스, USB-C 유선
감지기PAW3950 광 센서
DPI 범위최대 26,000 DPI
폴링 속도최대 8000Hz (무선)
스위치Custom ATK Switches (70 million click rating)
배터리 수명75~150시간 (사용량에 따라 다름)
무게49~54g
치수6.69 x 5.12 x 3.15인치(패키지)
색상하얀색

8. 보증 및 지원

ATKGEAR products come with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official ATKGEAR web대지.

For technical support, troubleshooting assistance, or to download the latest drivers and software, please visit:

www.atkgear.com/support

You may also contact our customer service team directly through the contact information provided on our web대지.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.