1. 서론
This manual provides essential information for the safe and efficient use of your Segway eKickScooter Flash Charger. Please read this manual thoroughly before using the charger to ensure proper operation and to prevent damage to the product or injury to yourself.
The Segway eKickScooter Flash Charger is designed to provide fast and reliable charging for compatible Segway eKickScooter models. It features a 70W output and smart LED indicators for charging status.
Image: The Segway eKickScooter Flash Charger, a compact black charging unit with a green LED indicator and the Segway logo.
2. 중요 안전 지침
부상이나 손상의 위험을 줄이려면 다음 안전 예방 조치를 준수하세요.
- Use only with compatible Segway eKickScooter models as specified in this manual.
- Keep the charger dry and away from water or moisture. This product has an IP20 rating, meaning it is for indoor use only.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Stop charging immediately if you notice any unusual smell, noise, or excessive heat from the charger or scooter battery. Disconnect the charger from the power outlet and the scooter.
- Disconnect the charger from the power outlet and the scooter once charging is complete.
- 충전기를 분해, 개조 또는 수리하려고 시도하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
- 충전기를 떨어뜨리거나 강한 충격을 주지 마세요.
The charger incorporates multiple safety features to protect the battery and ensure reliable performance:
- 오버볼tage 보호
- 언더볼tage 보호
- 과전류 보호
- 단락 보호
- 과열 보호
- Thermal Decay Test
- 타이밍 보호
Image: A diagram showing a microchip and text listing the 7 layers of safety protection integrated into the flash charger, including over voltag전자, 권 아래tage, over current, short circuit, over temperature, thermal decay test, and timing protection.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Segway eKickScooter Flash Charger (x1)
- AC 전원 코드 (1개)
- 사용 설명서(x1)
4. 설정
충전기를 사용하기 전에 다음 단계를 따르세요.
- Unpack the charger and AC power cord from the packaging.
- Connect one end of the AC power cord to the charger's input port.
- Plug the other end of the AC power cord into a standard wall outlet (100-240V AC).
- Ensure the charger's LED indicator is off or green (if no load is connected).
5. 사용 설명서
To charge your Segway eKickScooter:
- Ensure your eKickScooter is powered off.
- Locate the charging port on your eKickScooter.
- Connect the charger's output plug to the eKickScooter's charging port.
- Once connected, the charger's LED indicator will turn 빨간색, indicating that charging is in progress.
- When the eKickScooter battery is fully charged, the LED indicator on the charger will turn 녹색.
- Disconnect the charger from the eKickScooter, then unplug the AC power cord from the wall outlet.
The Flash Charger is designed for faster charging, significantly reducing the time required to fully charge your scooter.
Image: A graphic illustrating the charger's capability for up to 3X high-power flash charging, highlighting 210W peak output power compared to 70W normal output power.
Image: A comparison showing that the Flash Charger can reduce overall charging time by up to 50%. For example, charging a Ninebot F3/F3 Pro takes approximately 4 hours with the Flash Charger versus 8 hours with a normal charger.
6. 유지관리
Proper care ensures the longevity of your charger:
- 청소: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- 저장: 사용하지 않을 때는 충전기를 서늘하고 건조한 곳에 보관하세요. 극한의 온도와 직사광선을 피하세요.
- 점검: Periodically inspect the charger and power cord for any signs of damage, such as frayed wires or cracked casing. 손상된 경우 사용하지 마십시오.
7. 문제 해결
충전기에 문제가 발생하면 다음 표를 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Charger LED is off, no charging. | 콘센트에 전원이 안 들어옴; 연결이 헐거움; 충전기 고장. | Check wall outlet with another device. Ensure all connections are secure. If problem persists, contact customer support. |
| Charger LED remains green when connected to scooter. | Scooter battery is already full; poor connection to scooter; scooter charging port issue. | Verify scooter battery level. Reconnect charger to scooter. Ensure charging port on scooter is clean and undamaged. |
| Charger or scooter becomes unusually hot, emits strange smell/noise. | 과열; 내부 결함. | Immediately disconnect charger from wall and scooter. Do not use the charger. Contact customer support. |
8. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델명 | NBW54D601D3D01 (PH1104) |
| 입력 | 100–240V ~ 50/60Hz 2.5A Max |
| 산출 | 53.6V ⎓ 1.3A (Max 54.6V) |
| 힘 | 70와트 |
| 치수(L × W × H) | 118 × 83 × 168mm (4.7 × 3.3 × 6.6 인치) |
| 작동 온도 | -10°C ~ 40°C(14°F ~ 104°F) |
| IP 등급 | IP20(실내 사용 전용) |
| 호환 모델 | Segway MAX G3, F3, F3 Pro, GT3, ZT3 Pro |
| 인증 | UL, IEC |
Image: A table detailing the specifications of the Segway eKickScooter Flash Charger, including model, packaging dimensions, IP rating, output, and compatible scooter models.
9. 보증 및 지원
보증 정보: The Segway eKickScooter Flash Charger comes with a 180-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow instructions in this manual.
고객 지원: For technical assistance, warranty claims, or any questions regarding your Segway eKickScooter Flash Charger, please contact Segway customer support through their official web제품을 구매하신 웹사이트 또는 판매점을 알려주세요. 고객 지원팀에 문의하실 때는 모델 번호와 구매 날짜를 준비해 주시기 바랍니다.