1. 서론
This manual provides detailed instructions for the safe and effective use of your Godox V480F TTL Camera Flash. The V480F is a high-performance speedlite designed for Fujifilm cameras, featuring a 2.0-inch color touchscreen, 2.4GHz wireless system, and a powerful Li-ion battery. Please read this manual thoroughly before operation to ensure optimal performance and to prevent damage to the unit or injury to yourself.
2. 안전수칙
- 플래시 장치를 분해하거나 개조하지 마십시오. 수리는 반드시 공인 서비스 담당자만 수행해야 합니다.
- 제품을 건조한 곳에 보관하십시오. 비, 습기 또는 높은 습도에 노출시키지 마십시오.
- 플래시를 눈에 직접 노출시키지 마십시오. 강렬한 빛은 일시적인 시력 손상을 유발할 수 있습니다.
- Handle the Li-ion battery with care. Do not short-circuit, incinerate, or expose to extreme temperatures. Use only the specified charger.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- Ensure the flash is securely mounted to the camera or stand to prevent accidental drops.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 플래시 본체 1개
- 보관 가방 x1
- 디퓨저 x1
- 어댑터 x1
- 리튬 배터리 x1
- 미니 스탠드 1개
- USB-C 충전 케이블 x1
Image: All components included in the Godox V480F package.
4. 제품 특징
4.1 Intuitive Touchscreen & Buttons
The V480 features a 2.0-inch color touchscreen and tactile buttons for precise adjustments. Users can tap, swipe, or press buttons to navigate menus and change settings efficiently.
Image: The V480F's touchscreen interface.
4.2 스마트 거리 측정
The V480's display provides a real-time effective flash range, allowing users to confirm if the subject is within optimal reach for various shooting conditions, including tight spaces or bounce applications.
Image: Flash mounted on camera showing distance readout.
4.3 Sender & Receiver Functionality
The integrated Godox 2.4GHz X wireless system enables the V480 to function as both a sender and a receiver. It supports 32 channels and a range of up to 100 meters, allowing control of multiple flashes without external triggers.
Image: Wireless flash setup with the V480F.
4.4 Pro-Level Flash Modes
The V480 supports TTL, Manual, Multi mode, and High-Speed Sync (HSS) up to 1/8000s. It also includes Flash Exposure Compensation and Front/Rear-Curtain Sync for various creative lighting effects.
4.5 Lightweight Portability
Weighing approximately 282g (361g with battery), the V480 is designed for portability, fitting comfortably in hand and most camera bags.
Image: The V480F held in hand, demonstrating its compact size.
4.6 650 Full-Power Flashes
The 7.2V/2200mAh rechargeable Li-ion battery provides up to 650 full-power flashes with a recycle time of approximately 1.7 seconds. USB-C charging allows for convenient recharging.
Image: The V480F battery connected for USB-C charging.
4.7 10단계 모델링 Lamp
A built-in LED modeling lamp offers ten brightness levels, allowing users to preview how the flash will shape shadows and highlights before firing the main flash.
Image: The V480F's modeling lamp 사용 중.
4.8 유연한 바운스 헤드
The flash head can tilt from -7° to 120° and swivel a full 330°, providing flexibility for bouncing light off walls, ceilings, or floors to achieve soft, natural fill light or specific side lighting.
Image: Illustration of the flexible bounce head movement.
4.9 창의적인 조명 조절 도구
The flash includes a built-in catchlight panel and a wide-angle diffuser. The catchlight panel creates sparkling eye reflections, while the wide-angle diffuser softens and broadens light coverage.
Image: The V480F with its integrated light shaping tools.
4.10 폭넓은 액세서리 호환성
The V480 is compatible with various accessories, including the Godox AK-R1 Kit (via S-R2 adapter) and Bowens-mount softboxes or reflectors (using the S2 bracket).
Image: Accessory compatibility diagram for the V480F.
5. 시작하기
5.1 배터리 설치
- 플래시 장치의 전원이 꺼져 있는지 확인하십시오.
- Locate the battery compartment on the side or rear of the flash unit.
- 구획 덮개를 엽니다.
- 제공된 7.2V/2200mAh 리튬 이온 배터리를 극성을 확인하여 삽입하십시오.
- 배터리 덮개를 단단히 닫으세요.
5.2 플래시 장착
- Slide the flash's hot shoe onto your Fujifilm camera's hot shoe mount.
- 플래시 장치의 잠금 링이나 레버를 조여 카메라에 고정하십시오.
5.3 전원 켜기/끄기
Press and hold the power button (usually located on the side or rear) for a few seconds to turn the flash unit on or off. The touchscreen will illuminate upon power-on.
6. 사용 설명서
6.1 모드 선택
Use the touchscreen or navigation buttons to select your desired flash mode:
- TTL(Through-The-Lens) 모드: 플래시는 노출을 맞추기 위해 자동으로 출력량을 조절합니다.
- 수동(M) 모드: Manually set flash power output (e.g., 1/1 to 1/256).
- 멀티(스트로보스코픽) 모드: 단일 노출 중에 일련의 빠른 플래시를 발사하여 여러 가지 움직임을 포착합니다.
6.2 고속 동기화(HSS)
Activate HSS mode to use flash at shutter speeds faster than your camera's native sync speed (up to 1/8000s). This is useful for overpowering ambient light or using wide apertures in bright conditions.
6.3 플래시 노출 보정(FEC)
In TTL mode, FEC allows you to fine-tune the flash output by adjusting it up or down in increments (e.g., +/- 3 stops).
6.4 모델링 L 사용amp
전용 모델링 버튼을 누르세요amp button or access it via the touchscreen. Adjust brightness levels from 1 to 10 to preview 조명 효과.
6.5 Adjusting Bounce Head
Gently tilt and swivel the flash head to direct light. The head can tilt from -7° to 120° and swivel 330° horizontally. Ensure the head clicks into place at desired angles.
6.6 무선 작동 (2.4GHz X 시스템)
To use the V480 as a wireless sender or receiver:
- 터치스크린에서 무선 설정 메뉴에 접속하세요.
- Select 'Master' for sender mode or 'Slave' for receiver mode.
- Set the desired channel (1-32) and group (A, B, C, D, E) to match other Godox X system units.
- Ensure the ID setting is consistent across all units for reliable communication.
7. 유지관리
7.1 청소
Wipe the flash unit with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Do not use solvents or abrasive cleaners. Keep the hot shoe contacts clean and free of debris.
7.2 배터리 관리
- 처음 사용하기 전에 배터리를 완전히 충전하십시오.
- 배터리 부족 표시등이 켜지면 배터리를 충전하십시오.
- If storing the flash for an extended period, charge the battery to approximately 50% and remove it from the unit. Recharge every 3-6 months to maintain battery health.
7.3 보관
Store the flash unit in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag for protection.
8. 문제 해결
8.1 플래시가 작동하지 않음
- Check if the flash is powered on and the battery is charged.
- Ensure the flash is securely mounted to the camera's hot shoe.
- 카메라와 플래시 설정이 호환되는지 확인하십시오(예: 플래시 모드, 동조 속도).
- Clean the hot shoe contacts on both the flash and camera.
8.2 Exposure Issues (Too Bright/Dark)
- Adjust Flash Exposure Compensation (FEC) in TTL mode.
- 수동 모드에서 플래시 출력량을 조절하세요.
- 카메라 ISO, 조리개, 셔터 속도 설정을 확인하세요.
- Ensure the flash head is pointed correctly (if bouncing).
8.3 배터리가 충전되지 않음
- Verify the USB-C cable and adapter are properly connected and functional.
- 배터리가 충전기에 올바르게 삽입되었는지 확인하십시오.
- If the battery is completely depleted, it may take a few minutes for the charging indicator to appear.
8.4 Wireless Communication Problems
- Confirm all units (sender and receiver) are set to the same channel and group.
- Check that the wireless ID settings match.
- Ensure units are within the 100m operating range and there are no significant obstructions.
- 다른 2.4GHz 기기에서 발생할 수 있는 간섭을 확인하십시오.
9. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델 | V480F |
| 가이드 번호 | 대략 GN50 (ISO 100, 미터 단위) |
| 플래시 커버리지 | Auto zoom (flash coverage is set automatically to match the lens focal length and image size); Manual zoom (24-105mm) |
| 플래시 헤드 각도 | 스윙/틸팅 플래시 헤드(바운스 플래시): 수평 0~330°, 수직 -7°~120° |
| 플래시 기간(t0.1) | 1 / 600s-1 / 20000s |
| 노출 제어 | TTL 자동 플래시 및 수동 플래시 |
| 플래시 노출 보정(FEC) | ±3 stops with 1/3 increment each step |
| 동기화 모드 | High-speed sync (up to 1/8000 seconds), first-curtain sync and second-curtain sync |
| 멀티 플래시 | 제공 (최대 100회, 100Hz) |
| 무선 플래시 (2.4G 전송) | 발신자, 수신자 |
| 발신자 그룹 | A, B, C, D, E (V480C); M, A, B, C, D, E (V480S/V480N/V480F/V480O) |
| 수신기 그룹 | 가, 나, 다, 디, 마 |
| 전송 범위(대략) | 100m |
| 채널 | 32 (01-32) |
| ID | 꺼짐/01-99 |
| LED 모델링 Lamp 힘 | 2W |
| 색온도 | 5300K±300K |
| 전원 공급 장치 | 7.2V / 2200mAh 리튬 배터리 |
| 재활용 시간 | 약 1.7초 |
| Number of Flashes (approx.) | 650 |
| 전력 절약 | Standby and auto off functions provided |
| 동기화 트리거 모드 | 핫슈, 2.5mm 동기화 코드 |
| 치수(폭 x 높이 x 깊이) | 6.54인치 x 2.8인치 x 1.93인치 |
| 배터리 제외 순중량 | 약 282g |
| 배터리 포함 순중량 | 약 361g |
| 호환 가능한 마운팅 | Compatible with FUJIFILM Cameras (e.g., X-Pro2, X-T20, X-T2, X-T1, GFX50s, GFX50R, X-T30, X-T4, X-T3, X-H2, X-T50, X-S20, X-T5, X-Pro1, X-T10, X-E1, X-A3, X100F, X100T) |
10. 보증 및 지원
10.1 보증 정보
Godox products typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Godox web해당 지역 및 구매일에 따른 구체적인 이용 약관은 웹사이트를 참조하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
10.2 고객 지원
For technical assistance, troubleshooting not covered in this manual, or service inquiries, please contact Godox customer support through their official website or your local distributor. You can find more information and resources on the 아마존에서 GODOX 스토어를 만나보세요.