POPETPOP E27 Light Socket Base Bulb Holders Instruction Manual

1. 제품 오버view

The POPETPOP E27 Light Socket Base Bulb Holders are designed for versatile lighting applications, suitable for both indoor and outdoor environments. These refractory lamp sockets feature a heat-resistant ceramic inner layer for insulation and durability, and a waterproof sealing for reliable outdoor use. They are compatible with most E27 small three-way sockets, ensuring easy installation and broad applicability.

이미지 1.1: 앞면 view of the POPETPOP E27 Light Socket Base Bulb Holder, showcasing its grey finish and robust design.

패키지 내용:

• 2 x 패amp 소켓

2. 안전 정보

경고: Always disconnect power at the circuit breaker before installing, servicing, or removing any lighting fixture or socket. Failure to do so may result in serious injury or death from electrical shock.

• 모든 전기 연결이 안전한지 확인하고 해당 지역의 전기 규정을 준수하세요.
• 최대 와트를 초과하지 마십시오tage rating of the bulb or socket.
• Inspect the socket for any damage before installation. Do not use if damaged.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• For outdoor use, ensure the waterproof sealing is properly engaged and maintained.

3. 설정 및 설치

The POPETPOP E27 Light Socket is designed for straightforward installation. Follow these steps carefully:

1. 전원 차단: Before beginning, ensure the power supply to the installation area is turned off at the main circuit breaker.
2. 배선 준비: Connect the electrical wires to the appropriate terminals within the socket. Ensure a secure connection for both live and neutral wires. The socket is compatible with standard E27 wiring configurations.
3. 설치: Securely mount the light socket in your desired location. The design allows for various mounting options, including hanging or integration into existing fixtures.
4. Waterproof Sealing (for outdoor use): If installing outdoors, ensure the waterproof sealing ring is correctly positioned and tightened to prevent water ingress.
5. 전구 삽입: Once the socket is securely installed and wired, carefully screw an E27 base bulb into the socket until it is snug.
6. 복원력 : 회로 차단기를 다시 켜세요.

Image 3.1: Illustration of a hand installing an E27 bulb into a recessed light fixture, demonstrating the compatibility and ease of use of the socket.

Image 3.2: The E27 light socket positioned next to two E27 base light bulbs, highlighting its compatibility and ease of installation.

4. 사용 설명서

Operating the POPETPOP E27 Light Socket is simple once installed:

• Ensure an E27 base light bulb is securely screwed into the socket.
• Activate the power switch connected to the circuit where the socket is installed. The light should illuminate.
• 조명을 끄려면 전원 스위치를 끄십시오.
• To replace a bulb, always turn off the power at the circuit breaker first, allow the bulb to cool, then unscrew the old bulb and screw in the new one.

Image 4.1: A clear E27 light bulb screwed into the POPETPOP socket, demonstrating the proper fit and connection for operation.

5. 유지관리

Regular maintenance ensures the longevity and safe operation of your light socket:

• 청소: Periodically wipe the exterior of the socket with a dry, soft cloth. Do not use abrasive cleaners or liquids directly on the socket. Ensure power is off before cleaning.
• 점검: Regularly inspect the socket for any signs of wear, damage, or loose connections. Pay particular attention to the wiring and the waterproof seal if used outdoors.
• 내열성: The ceramic inner layer is designed for heat resistance. Avoid placing the socket in environments that exceed its intended operating temperature range.

6. 문제 해결

If you encounter issues with your light socket, refer to the following common troubleshooting steps:

If the problem persists after trying these solutions, consult a qualified electrician.

7. 사양

Detailed specifications for the POPETPOP E27 Light Socket Base Bulb Holders:

• 모델 번호: 506OGA3STAZ4117O7N7
• 치수: Approximately 8.70 cm (3.42 in) height x 4.50 cm (1.77 in) width x 2.30 cm (0.90 in) depth
• 색상: 회색
• 재료: ABS (Acrylonitrile Butadiene Styrene), Ceramic, Copper
• 호환성: E27 screw base bulbs
• 특징: Heat-resistant ceramic inner layer, waterproof sealing
• 용도: 실내 및 실외

Image 7.1: Diagram showing the approximate dimensions of the POPETPOP E27 Light Socket, including height and base diameter.

이미지 7.2: 상세 views of the E27 light socket, highlighting the internal ceramic component and the external waterproof seal.

8. 보증 및 지원

Specific warranty details for the POPETPOP E27 Light Socket Base Bulb Holders are not provided within this manual. For warranty information, technical support, or further assistance, please refer to the product packaging or contact the manufacturer directly through their official web사이트 또는 고객 서비스 채널.

Manufacturer: POPETPOP