ZORNHER ZH870 무선 게이밍 기계식 키보드 사용 설명서

소개

This manual provides detailed instructions for the ZORNHER ZH870 Wireless Gaming Mechanical Keyboard. Please read this guide thoroughly to ensure proper setup, operation, and maintenance of your device. The ZH870 features an 80% layout, IMD PC keycaps, creamy linear switches, hot-swappable design, RGB backlighting, and triple connectivity options.

Image: ZORNHER ZH870 Wireless Gaming Mechanical Keyboard with its distinctive spider web pattern and purple RGB backlighting.

패키지 내용

Verify that all items are present in your ZORNHER ZH870 package:

• 1 x Fully Assembled Mechanical Keyboard Body
• 3 x 교체 스위치
• 1 x 키캡 풀러
• 1 x 2.4GHz Receiver (USB Dongle)
• 1 x USB-C Cable (1.8m nylon)
• 1 x 더스트 커버
• 1 x 사용 설명서

Image: A visual representation of the ZORNHER ZH870 package contents, including the keyboard, USB-C cable, 2.4GHz receiver, replacement switches, keycap puller, and instruction manual.

설정

초기 충전

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port (e.g., computer, wall adapter). The keyboard features a 4000mAh battery.

연결 옵션

The ZORNHER ZH870 supports three connection modes: 2.4GHz wireless, Bluetooth 5.0, and USB-C wired. You can connect up to 5 devices simultaneously.

Image: An illustration detailing the keyboard's triple connection capabilities, including 2.4GHz wireless, Bluetooth 5.0, and USB-C wired, along with examples of compatible devices such as Switch, Xbox, PlayStation, PC, Laptop, Tablet, and Phone.

2.4GHz 무선 연결

1. 패키지에서 2.4GHz USB 수신기를 찾으세요.
2. 수신기를 컴퓨터의 사용 가능한 USB 포트에 연결하십시오.
3. On the keyboard, switch the mode selector to 2.4GHz. The keyboard should automatically connect.

블루투스 5.0 연결

1. On the keyboard, switch the mode selector to Bluetooth.
2. Press and hold the Fn key + a designated Bluetooth channel key (e.g., Fn + 1, Fn + 2, Fn + 3) for 3-5 seconds until the indicator light flashes, indicating pairing mode.
3. On your device (PC, Mac, tablet, phone), go to Bluetooth settings and select "ZORNHER ZH870" to pair.
4. 페어링이 완료되면 표시등이 켜집니다.

USB-C 유선 연결

1. 제공된 USB-C 케이블을 키보드의 USB-C 포트에 연결합니다.
2. USB-C 케이블의 다른 쪽 끝을 컴퓨터의 사용 가능한 USB 포트에 연결합니다.
3. 키보드는 자동으로 유선 모드로 전환되어 충전을 시작합니다.

작동 지침

모드 간 전환

Use the physical switch located on the keyboard to select between 2.4GHz, Bluetooth, and Wired (USB-C) modes.

RGB 조명 제어

The ZH870 features 22 preset RGB lighting effects, including side-glow and south-facing LEDs. Use the following key combinations to control the lighting:

• Fn + Shift: 백라이트 색상 변경
• Fn + Code: Change Backlight Effect (Cycle through 22 modes)
• Fn + 백스페이스: 조명 켜기/끄기
• Fn + ↑: 밝기 증가
• Fn + ↓: 밝기 감소
• Fn + ←: Speed Up Light Change Rate
• Fn + →: Speed Down Light Change Rate

Image: A visual guide illustrating the function key combinations for adjusting RGB backlight color, effects, brightness, and speed on the ZORNHER ZH870 keyboard.

맞춤 설정 및 소프트웨어

The ZORNHER ZH870 is fully customizable with driver support. You can remap keys, set macros, and personalize lighting modes to fit your gaming or workflow style. Refer to the official ZORNHER website for driver downloads and detailed software instructions.

Image: A screenshot of the ZORNHER software interface, demonstrating options for RGB lighting effects, macro recording, and profile customization for the ZH870 keyboard.

유지

청소

To clean your keyboard, disconnect it from power. Use a soft, dry cloth to wipe the keycaps and chassis. For deeper cleaning, use the provided keycap puller to remove keycaps and a soft brush or compressed air to remove dust and debris from beneath them.

스위치 교체(핫스왑 가능)

The ZH870 features a hot-swappable PCB, compatible with both 3-pin and 5-pin mechanical switches. No soldering is required for switch replacement.

1. Using a switch puller (not included, but often comes with replacement switches), carefully grip the switch and pull it straight up to remove it.
2. 새로운 스위치의 핀을 PCB의 구멍에 맞춥니다.
3. 새 스위치를 딸깍 소리가 나면서 제자리에 단단히 고정될 때까지 부드럽게 눌러주세요. 핀이 구부러지지 않았는지 확인하십시오.
4. Test the new switch to confirm functionality.

이미지: 자세한 view of the ZORNHER ZH870's hot-swappable PCB, showing the switch sockets and a switch puller tool, highlighting compatibility with 3-pin and 5-pin switches.

문제 해결

• 키보드가 응답하지 않음: Ensure the keyboard is charged. Check the connection mode (2.4GHz, Bluetooth, or USB-C) and ensure it matches your device's connection. For wireless modes, verify the receiver is properly plugged in or Bluetooth is paired. Try restarting the keyboard or your device.
• RGB 조명이 작동하지 않음: Ensure the lights are not turned off (Fn + Backspace). Check brightness levels (Fn + ↑/↓). If using software, verify settings.
• 연결 문제: For 2.4GHz, try a different USB port for the receiver. For Bluetooth, unpair and re-pair the device. Ensure no other wireless devices are causing interference. For wired, try a different USB-C cable or port.
• 키가 등록되지 않음: If a specific key is not working, it might be a faulty switch. Utilize the hot-swappable feature to replace the switch with one of the provided spares.
• 배터리가 빨리 소모됩니다: Reduce RGB brightness or turn off lighting when not needed. Ensure the keyboard is fully charged. If the issue persists, contact support.

명세서

보증 및 지원

The ZORNHER ZH870 Wireless Gaming Mechanical Keyboard comes with a 2년 보증 from the date of purchase, covering manufacturing defects. For warranty claims, technical assistance, or any product-related inquiries, please contact ZORNHER customer support through the official web사이트 또는 소매업체의 지원 채널.

보증 확인을 위해 구매 증빙서류를 보관하세요.