BWT EV03CBX

BWT EV03CBX Rechargeable Pool Vacuum Kit User Manual

Model: EV03CBX

1. 서론

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BWT EV03CBX Rechargeable Pool Vacuum Kit. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT EV03CBX is a cordless, portable cleaning device designed for maintaining spas and small pools. It features a rechargeable lithium battery for convenient operation and a filter system to capture fine debris.

2. 안전 정보

경고: Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

  • 이 제품을 사용하기 전에 모든 지침을 읽으세요.
  • Do not operate the vacuum when people are in the pool.
  • Keep the charging port dry. Do not charge the vacuum near water or with wet hands.
  • 제조업체에서 제공하는 충전기만 사용하십시오.
  • Do not attempt to disassemble or repair the battery or motor unit. Contact qualified service personnel.
  • Store the vacuum in a cool, dry place away from direct sunlight when not in use.
  • 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.

3. 패키지 내용

Verify that all items listed below are present in your package. If any parts are missing or damaged, contact customer support.

  • BWT EV03CBX Pool Vacuum Unit
  • Filter Bag (0.3-liter capacity)
  • 충전 케이블(USB)
  • Pole Sections (2 sections, total 36.6 inches)
  • Vacuum Head with Wheels
  • 브러시 부착
BWT EV03CBX Rechargeable Pool Vacuum Kit, fully assembled

Image 1: Fully assembled BWT EV03CBX Rechargeable Pool Vacuum Kit.

4. 설치 및 조립

4.1 배터리 충전

  1. Ensure the vacuum unit is dry before charging.
  2. Locate the charging port on the vacuum unit.
  3. Connect the provided USB charging cable to the vacuum unit and to a suitable USB power adapter (not included).
  4. Allow the vacuum to charge fully before first use. The charging indicator light will change color or turn off when charging is complete.
USB charging cable for BWT pool vacuum

Image 2: USB charging cable.

4.2 Assembling the Pole

  1. Take the two pole sections.
  2. Connect the two sections by aligning the holes and pressing the spring clips. Ensure they lock securely.
  3. Attach the assembled pole to the vacuum unit. The pole is compatible with standard 1-1/4 inch attachments.
Two sections of the aluminum pole for the pool vacuum

Image 3: Two pole sections for assembly.

4.3 Attaching the Vacuum Head or Brush

  1. Select either the vacuum head with wheels or the brush attachment based on your cleaning needs.
  2. Align the chosen attachment with the bottom of the vacuum unit and push firmly until it clicks into place.
Brush attachment for BWT pool vacuum

Image 4: Brush attachment.

5. 사용 설명서

5.1 Starting the Vacuum

  1. 진공 청소기가 완전히 충전되었는지 확인하세요.
  2. Submerge the vacuum unit completely in water. The non-return valve prevents water from flowing back out.
  3. Locate the power switch on the vacuum unit. Turn it ON. The motor will start, and the vacuum will begin to draw water and debris.

5.2 Cleaning the Pool/Spa

  • Gently guide the vacuum head along the bottom and sides of your pool or spa.
  • Move the vacuum slowly to allow sufficient time for debris to be collected.
  • The vacuum is designed to operate effectively in water depths up to 2 meters.
  • The lithium battery provides up to 30 minutes of continuous operation on a full charge.

5.3 Stopping the Vacuum

  1. 전원 스위치를 끕니다.
  2. Carefully remove the vacuum from the water.

6. 유지관리

6.1 Cleaning the Filter Bag

It is recommended to clean the filter bag after each use or when suction power decreases.

  1. Ensure the vacuum is turned OFF and removed from water.
  2. Locate the click-lock opening system on the vacuum unit. Open it to access the filter compartment.
  3. 필터 백을 제거합니다.
  4. Empty any collected debris from the filter bag.
  5. Rinse the filter bag thoroughly with clean water until all debris is removed.
  6. Reinsert the clean filter bag into the vacuum unit and securely close the click-lock system.
BWT EV03CBX pool vacuum body showing the transparent filter compartment

Image 5: Vacuum body with visible filter compartment.

6.2 보관

  • After cleaning, ensure the vacuum unit and filter bag are completely dry before storage.
  • Store the vacuum in a cool, dry place, away from direct sunlight and extreme temperatures.
  • For long-term storage, it is recommended to charge the battery periodically to maintain its health.

7. 문제 해결

문제가능한 원인해결책
진공이 켜지지 않습니다.배터리가 충전되지 않았습니다.배터리를 완전히 충전하십시오.
흡입력이 낮습니다.필터백이 가득 찼거나 막혔습니다.필터 백을 청소하십시오.
흡입력이 낮습니다.Debris is blocking the intake.Inspect and clear any blockages from the vacuum head or intake port.
진공이 예기치 않게 멈춥니다.배터리가 소진되었습니다.배터리를 충전하세요.

8. 사양

  • 모델: EV03CBX
  • 전원: 충전식 리튬 배터리
  • 작동 시간: 최대 30분(완전 충전)
  • 필터 용량: 0.3리터
  • 최대 작동 깊이: 2미터(6.5피트)
  • 폴 길이: 36.6 inches (two sections)
  • 폴 호환성: Standard 1-1/4 inch attachments
  • 제품 크기: 6"L x 2"W x 10"H (vacuum unit only)

9. 보증 및 지원

For warranty information or technical support, please refer to the warranty card included with your product or visit the official BWT web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

고객 지원: For assistance, please contact BWT customer service through their official channels.

© 2026 BWT. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.